• Advances in Energy Research
• /
• v.4 no.2
• /
• pp.121-146
• /
• 2016

This study is concerned with the analysis of two renewable technologies for electric energy production: wind energy and photovoltaic energy. The two technologies were assessed and compared by economic point of view, by using selected indicators characterized by a clear calculation approach, requirement of information easy to be collected, clear, but even complete, interpretation of results. The used economic indicators are Levelized Cost of Energy, $CO_2$ abatement cost and fossil fuel saving specific cost; these last two specifically aimed at evaluating the different capabilities that renewable technologies have to cut down direct $CO_2$ emissions and to avoid fossil fuel extraction. The two technologies were compared also from the environmental point of view by applying Life Cycle Assessment approach and using the environmental impact categories from the Eco-indicator'95 method. The economic analysis was developed by taking into account different energy system sizes and different geographic areas in order to compare different European conditions (Italy, Germany and Denmark) in term of renewable resource availability and market trend. The environmental analysis was developed comparing two particular types of PV and wind plants, respectively residential and micro-wind turbine, located in Italy. According to the three calculated economic indicators, the wind energy emerged as more favorable than PV energy. From the environmental point of view, both the technologies are able to provide savings for almost all the considered environmental impact categories. The proposed approach, based on the use of economic and environmental indicators may be useful in supporting the policies and the decision making procedures concerned with the promotion and use of renewables, in reference to the specific geographic, economic and temporal conditions.

• Journal of Advanced Navigation Technology
• /
• v.17 no.2
• /
• pp.234-239
• /
• 2013

Learning a lesson about poor concentration and problems of the existing content, the system of language which could not be determined, Many teachers' assessment decision was made. As a result, voice recording based on the combination of ubiquitous technology and virtual reality technology, and install the projector in a classroom Through the learning content corresponding grade English student ID card attached RFID reader in each classroom, and students of RFID tags attached. In reality of the virtual three-dimensional image content foreigners and question-and-answer using the voice recording technology at the same time check the pronunciation and intonation level passes or level failure judged. Student education data to a central server system is configured to do so after saving to the DB through a feedback process, which provides information. Analysis of the issues that can have a common language content in the present study and Problem for voice recording technology to solve the problem and did not solve the existing language in the content level based classes.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.595-598
• /
• 2013

Background: Lung cancer is the leading cause of cancer death worldwide Therefore, identification of genetic as well as environmental factors is very important in developing novel methods of lung cancer prevention. However, this is a multi-layered problem. Therefore a lung cancer risk prediction system is here proposed which is easy, cost effective and time saving. Materials and Methods: Initially 400 cancer and non-cancer patients' data were collected from different diagnostic centres, pre-processed and clustered using a K-means clustering algorithm for identifying relevant and non-relevant data. Next significant frequent patterns are discovered using AprioriTid and a decision tree algorithm. Results: Finally using the significant pattern prediction tools for a lung cancer prediction system were developed. This lung cancer risk prediction system should prove helpful in detection of a person's predisposition for lung cancer. Conclusions: Most of people of Bangladesh do not even know they have lung cancer and the majority of cases are diagnosed at late stages when cure is impossible. Therefore early prediction of lung cancer should play a pivotal role in the diagnosis process and for an effective preventive strategy.

• Journal of Digital Convergence
• /
• v.12 no.6
• /
• pp.1-11
• /
• 2014

With the drastic development of technology for almost eternally saving digital information, cases for giving sufferings to a person who deserves to enjoy privacy have increased. So I study the right to be forgotten focusing on the collision between that right and freedom of expression. I also study the concept of the right to be forgotten and its legal basis for the protection of that right. That right can be protected mainly by the self-decision making right under the Article 10, and secondly the privacy right under the Article 17 of the Constitutional Law. The Press Arbitration Law can be applied to protect the right to be forgotten, but that Law needs the revision of time-limit clause for complain, protection clause for the right to ask to delete factual past article, and the clause of staleness doctrine for the consent of giving personal information.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.3
• /
• pp.223-230
• /
• 2017

BIM(building information modeling) has been actively applied to construction industries and to maximize its application through the life cycle of structure, various relevant technologies have been proposed. In particular, 4D sequencing management and 5D cost-related management were introduced as an improved version of the design review and interface control by 3D information design. On the other hand, the virtual construction using virtual construction equipment can sophisticatedly handle capacity, dynamic movement, collision boundaries of actual construction machines but it still stays at a low level in a technical sense. In this study, simulation systems based on BIM involving virtual construction equipment have been developed; then it is applied to the actual construction project to evaluate the safety and efficiency of construction equipments. It was confirmed that the simulation systems can be utilized to construct virtual construction site by using an effective 3D library of construction equipment and can plays a key role to secure construction safety and economic feasibility. Specifically, the simulation system are very useful for decision making by construction managers to select the optimum equipment and construction method with a better understanding for safety and cost-saving.

• Journal of Korea Multimedia Society
• /
• v.10 no.3
• /
• pp.348-357
• /
• 2007

One of the major issues in recent researches on wireless sensor networks is to reduce energy consumption of sensor nodes operating with limited battery power, in order to lengthen their lifespan. Among the researches, we are interested in the schemes in which a sensor node periodically turns on and off its radio and requires information on the time when its neighbors will wake up (or turn on). Clock synchronization is essential for wakeup scheduling in such schemes. This paper proposes three methods based on the asynchronous averaging algorithm for clock synchronization in sensor nodes which periodically wake up: (1) a fast clock synchronization method during an initial network construction period, (2) a periodic clock synchronization method for saving energy consumption, and (3) a decision method for switching the operation mode of sensor nodes between the two clock synchronization methods. Through simulation, we analyze maximum clock difference and the number of messages required for clock synchronization.

• Land and Housing Review
• /
• v.3 no.4
• /
• pp.399-406
• /
• 2012

One-third of total energy and 50% of $CO_2$ emissions arise from construction phase. Because of this global amount of energy consumption and $CO_2$ emission, we must do our best to solve this problem. But our existing ways of meeting this problem has focused on the energy consumption saving of the construction and dwelling stage. On the other hand, we has been treated too lightly for handling the $CO_2$ emissions problem during the maintenance management and the demolition process so far,. In this paper, we quantitatively predicted and evaluated the environmental load in each construction step during all life cycle. And, we developed the environmental load assessment program for each construction step. And we proposed the reliable decision support model for objective and reliable environmental load assessment and reduction. This result must help the development of construction technology and low carbon & green growth.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.6
• /
• pp.145-152
• /
• 2012

Due to the large sizes of streaming media, previous delivery techniques are not providing optimal performance. For this purpose, video proxy server is employed for reducing the bandwidth consumption, network congestion, and network traffic. This paper proposes a fast distributed network file system using state transition model in the media streaming system for efficient utilization of video proxy server. The proposed method is composed of three steps: step 1. Training process using state transition model, step 2. base and decision probability generation, and step 3. storing and deletion based on probability. In addition, storage space of video proxy server is divided into each segment area in order to store the segments efficiently and to avoid the fragmentation. The simulation results show that the proposed method performs better than other methods in terms of hit rate and number of deletion. Therefore, the proposed method provides the lowest user start-up latency and the highest bandwidth saving significantly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.760-768
• /
• 2009

In this paper, we propose the energy efficient transmission parameter selection method for Wireless Personal Area Network (WPAN) system which is applied to e-Navigation system considering various ship models environment. An appropriate selection of transmission parameters of HR-WPAN system is very essential to be considered for saving WPAN devices' energy consumption, when HR-WPAN system is applied to ship area network (SAN). Therefore, we propose an energy consumption model for a ship area network employing IEEE 802.15.3 based CSMA/CA HR-WPAN model and analyze the effect of transmission parameter selection on the performance of energy consumption. In particular, the path loss is the major performance decision parameter for the SAN employing HR-WPAN system, since it varies according to the material of shipbuilding such as steel(for large ship), FRP(for medium size ship) and compound wood(for small ship). Thus, we analyze and demonstrate that the proper transmission parameter selection of transmit power, PHY data rate and fragment size for each ship model could guarantee energy efficiency.

• Journal of Preventive Medicine and Public Health
• /
• v.46 no.4
• /
• pp.201-209
• /
• 2013

Objectives: The goal of this study was to perform an economic analysis of a primary stenting with drug-eluting stents (DES) compared with bare-metal stents (BMS) in patients with acute myocardial infarction (AMI) admitted through an emergency room (ER) visit in Korea using population-based data. Methods: We employed a cost-minimization method using a decision analytic model with a two-year time period. Model probabilities and costs were obtained from a published systematic review and population-based data from which a retrospective database analysis of the national reimbursement database of Health Insurance Review and Assessment covering 2006 through 2010 was performed. Uncertainty was evaluated using one-way sensitivity analyses and probabilistic sensitivity analyses. Results: Among 513 979 cases with AMI during 2007 and 2008, 24 742 cases underwent stenting procedures and 20 320 patients admitted through an ER visit with primary stenting were identified in the base model. The transition probabilities of DES-to-DES, DES-to-BMS, DES-to-coronary artery bypass graft, and DES-to-balloon were 59.7%, 0.6%, 4.3%, and 35.3%, respectively, among these patients. The average two-year costs of DES and BMS in 2011 Korean won were 11 065 528 won/person and 9 647 647 won/person, respectively. DES resulted in higher costs than BMS by 1 417 882 won/person. The model was highly sensitive to the probability and costs of having no revascularization. Conclusions: Primary stenting with BMS for AMI with an ER visit was shown to be a cost-saving procedure compared with DES in Korea. Caution is needed when applying this finding to patients with a higher level of severity in health status.