• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.329-332
• /
• 2004

Cast-forging process has a lot of advantages in terms of saving materials along with enhancement of mechanical properties. Therefore, this process has been taken as one of candidate process to manufacturing automotive suspension parts. Since most of cast-forging parts are made with using Al-Si alloys of high castability, the mechanical properties largely depends on the primary ${\alpha}$ and eutectic Si particles. During hot forging step these microstructural features evolve with strain increment. In the present study, the mechanical property evolution was investigated in terms of microstructual evolution with strain. Specially, fracture behavior of A356 alloy was studied to find out how to improve the mechanical properties.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.12
• /
• pp.1175-1183
• /
• 2001

Recently, a great attention has been paid to the ice thermal storage system for the purpose of energy saving and reduction in peak electrical demand. In the present study, it has been investigated the freezing behavior of several kinds of water solutions with nonionic surfactant. In order to prevent ice blockage in a cooled pipe, the amount and wall adhesion behavior of ice of the test fluids were observed experimentally under different concentration of water solution with surfactant, temperature of cooled wall, and the shear velocity of test fluids. The results showed that the size of ice crystal became smaller at higher shear velocity at wall. And the lowest limit of wall adhesion of ice in water solution with surfactant was found at 230 W/$m^2$ of heat flux.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.5
• /
• pp.362-370
• /
• 2003

This study was conducted to investigate the dietary behavior and utilization of university foodservice in Incheon area. Self administered questionnaires were collected from 305 students. Statistical data analysis was completed using a SPSS v. 10.0 program. The results are summarized as follows: Most students had poor dietary behavior, such as skipping meals. Only 21.4% of male students and 30% of female students responded to have breakfast regularly. About 60% of students were utilizing for lunch at the university foodservice and 3.9% of them for dinner, which mainly caused by the reasons “low price”, “time saving”, “near place”. In particular, only 21% of students used the university foodservice daily. More than 80% of students responded to have lunch at restaurants around campus when they did not have meals at the university foodservice. Reasons for not utilizing the university foodservice were responed as simple menus and tasteless, etc. Recommendations for the improvements of the university foodservice can be summarized as menu variation, emphasis on taste, reducing of noise, expending opening time, reducing waiting time, sanitation, change of old utensils and comfortable atmosphere of dining hall.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.619-627
• /
• 2005

An initial member sections of steel structures is selected by experience of expert building structural designers. And appropriate member section is designed by repeat calculation through structural analysis. Therefore an initial assumption of member section is necessary for saving the time for structural design and is important to acquire safety of building structures. Also brace damper are generally used to prevent or decrease structural damage by its hysteretic behavior in building structures subjected to strong earthquake. Based on plastic design, the initial section of members for architectural steel structures with brace hysteretic dampers is presented and seismic effect of structural behavior by the ratio of damper stiffness to structural story stiffness is estimated in this paper.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.5
• /
• pp.691-696
• /
• 2012

In this study, a rigid multi-body dynamic model has been developed for mechatronic analysis to evaluate dynamic behavior of a machine tool. The development environment was the commercialized analysis tool, ADAMS, for rigid multi-body dynamic analysis. A simplified servo control logic was implemented in the tool using its functions in order to negate any external tool of control definition. The advantage of the internal implementation includes convenience of the analysis process by saving time and efforts. Application of this development to a machine tool helps to evaluate its dynamic behavior against feeding its component, to calculate the motor torque, and to optimize parameters of the control logic.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.56-62
• /
• 2000

Semi-solid forming process has some advantages such as successful manufacturing of high quality components with less inner defects suitable for less machining high productivity and energy-saving effect. the thixotropic behavior(solid-like in the unperturbed state and liquid-like during shearing) has been the basis for the semi-solid forming process. The main focus of this article is the investigation of the effect of T6 heat treatment and alloying elements on the mechanical properties in the semi-solid formed products using thixotropic hypoeutectic (A357 and ALTHIX 86S) and hypereutectic(A390) materials. The new methods to produce semi-solid formed components with high quality are also proposed and discussed in terms of a die design and the development of a lubricant.

• Steel and Composite Structures
• /
• v.25 no.5
• /
• pp.523-534
• /
• 2017

Cable-supported ribbed beam composite slab structure (CBS) is proposed in this study. As a new cable-supported structure, it has many merits such as long span availability and cost-saving. Inspired by the previous research on cable-supported structures, the fabrication and construction process are developed. Pre-stress design method based on static equilibrium analysis is presented. In the algorithm, the iteration convergence can be accelerated and the calculation result can be kept in an acceptable precision by setting a rational threshold value. The accuracy of this method is also verified by experimental study on a 1:5 scaled model. Further, important parameters affecting the mechanical features of the CBS are discussed. The results indicate that the increases of sag-span ratio, depth of the ribbed beam and cable diameter can improve the mechanical behavior of the CBS by some extent, but the influence of strut sections on mechanical behavior of the CBS is negligible.

• Laser Solutions
• /
• v.5 no.2
• /
• pp.23-29
• /
• 2002

As automotive manufacturers have taken a growing more interest in tailored sheet metals for improving the rigidity, weight reduction, crash durability, and cost saving application of the tailored sheet metals to automotive bodies has been resently increased greatly. In this study, we investigated the characteristics of fatigue crack initiation behavior of laser welded sheet use for vehicle body panel. We experimented three types of specimens which were machined of the same base metal : one is 1.4㎜ thick, another is 1.6㎜ thick, the others is laser welded of the 1.4mm thick specimen and 1.6㎜ thick specimen. The results indicated that laser welded metal (1.4＋1.6㎜) is the best one for fatigue strength and fatigue life.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.8
• /
• pp.3529-3550
• /
• 2016

In heterogeneous networks (HetNets), energy saving is vital for a sustainable network development. Many techniques, such as spectrum allocation, network planning, etc., are used to improve the network energy efficiency (EE). In this paper, micro BSs utilizing cell range expansion (CRE) and spectrum allocation are considered in multi-channel heterogeneous networks to improve EE. Hotspot region is assumed to be covered by micro BSs which can ensure that the hotspot capacity is greater than the average demand of hotspot users. The expressions of network energy efficiency are derived under shared, orthogonal and hybrid subchannel allocation schemes, respectively. Particle swarm optimization (PSO) algorithm is used to solve the optimal ratio of subchannel allocation in orthogonal and hybrid schemes. Based on the results of the optimal analysis, we propose three service control strategies on the basis of large-scale user behaviors, i.e., adjust micro cell rang expansion (AmCRE), adjust micro BSs density (AmBD) and adjust micro BSs transmit power (AmBTP). Both theoretical and simulation results show that using shared subchannel allocation scheme in AmBD strategies can obtain maximal EE with a very small area ratio. Using orthogonal subchannel allocation scheme in AmCRE strategies can obtain maximal EE when area ratio is larger. Using hybrid subchannel allocation scheme in AmCRE strategies can obtain maximal EE when area ratio is large enough. No matter which service control strategy is used, orthogonal spectrum scheme can obtain the maximal hotspot user rates.

• The Research Journal of the Costume Culture
• /
• v.24 no.3
• /
• pp.336-348
• /
• 2016

This study was executed to deduce the factors affecting eco-friendly behaviors and attitudes, to analyse the difference of eco-friendly behaviors and attitudes between countries, and to draw the variables affecting clothing recycling behavior. The sample comprised people from the UK, China, South Korea. The results were as follows. The four factors related to eco-friendly behaviors and the five factors related to eco-friendly attitudes were derived from the results of factor analysis. In the case of eco-friendly behaviors, four eco-friendly behavior factors showed a significant difference all according to gender and country. In the case of eco-friendly attitudes, saving of natural resources for eco-friendly life, recycling for eco-friendly life, and individual preference for eco-friendly life showed a significant according to gender, also recycling for eco-friendly life, individual preference for eco-friendly life, social awareness for eco-friendly life, and company's awareness for eco-friendly life showed a significant difference according to country. All of the variables related to clothing recycling behaviors showed the significant difference according to gender and countries. It was verified that the stronger the behaviors or attitudes for waste recycling and environmental protection, individual preference for eco-friendly life, saving of natural resources, buying eco-friendly products, and separate collection for recycling, the more positive the action to clothing recycling. The results of this study will be helpful to establish a marketing strategy for each country and to deduce a plan to attract clothing recycling form people.