• Title/Summary/Keyword: saving

Search Result 5,771, Processing Time 0.037 seconds

A STUDY ON NEWCASTLE DISEASE VACCINATION: The Immunological Response to Inactivated and Attenuated Virus Vaccines (Newcastle병(病)의 예방접종(豫防接種)에 관한 연구(硏究); 사독(死毒)백신 및 감독(減毒)된 생독(生毒)백신에 대한 면역학적(免疫學的) 반응(反應))

  • Chung, Gill Taik
    • Korean Journal of Veterinary Research
    • /
    • v.2 no.1
    • /
    • pp.27-36
    • /
    • 1962
  • Immune response to two methods of Newcastle disease virus vaccine, one inactivated and the other attenuated was observed and the data presented. (1) Administration of inactivated virus vaccine in an amount of 1.0 ml. by intramuscular route gave an appreciable immunity to Newcastle disease for a period of at least three-and-half months. (2) The chickens given attenuated virus vaccine in the drinking water produced satisfactory immunity as manifested by the fact that immunized birds showed resistance when challenged 105 days after the vaccination and maintained high degree of HI titer for a period of 75 days. (3) Vaccination with the attenuated virus vaccine in drinking water is very simple and time saving in procedure, although the duration of immunity seems to be slightly shorter than that proced by inactivated virus vaccine. The author wishes to express his appreciation, to Drs. Kyu Myung Lee, Chang Koo Lee, and Ryong Sook Kee of their suggestions and help. The author is also indebted to Dr. Chang Hi Lee, Director of Anyang Veterinary Laboratory, who allowed the use of the facilities of the laboratory, whitout which this experiment could not have been undertaken.

  • PDF

Seasoning of Commercial Wood Using Solar Energy (태양에너지를 이용한 유용목재의 건조)

  • Jung, Hee-Suk;Lee, Hyoung-Woo;Lee, Nam-Ho;Lee, Sang-Bong
    • Journal of the Korean Wood Science and Technology
    • /
    • v.16 no.4
    • /
    • pp.10-39
    • /
    • 1988
  • This study investigated the temperatures and relative humidities in the semi-greenhouse type solar dryer with a black rock-bed heat storage and without heat storage and outdoor temperature and relative humidity at 9 a.m. and 2 p.m.. A comparison was made of the drying rates, final moisture contents, moisture content distributions, casehardening stresses, drying defects, volumetric shrinkage of dried lumber for solar- and air-drying from the green condition of mixtures of Douglas-fir, lauan, taun, oak and sycamore 25mm- and 50 mm-thick lumber during the same period for four seasons, and heat efficiencies for solar dryer with and without the heat storage for saving of heat energy and the cost of lumber drying using the solar energy. The results from this study were summarized as follows: I. The mean weekly temperatures in the solar dryers were 3 to $6^{\circ}C$ at 9 a.m. and 9 to $13^{\circ}C$ at 2 p.m. higher than mean outdoor temperature during all the drying period. 2. The mean weekly relative humidities in the solar dryers were about 1 to 19% at 9 a.m. higher than the outdoor relative humidity. and the difference between indoor and outdoor relative humidity in the morning was greater than in the afternoon. 3. The temperatures and relative humidities in the solar dryer with and without the heat storage were nearly same. 4. The overall solar insolation during the spring months was highest and then was greater in the order of summer, atumm, and winter month. S. The initial rate of solar drying was more rapid than that of air drying. As moisture content decreased, solar drying rate became more rapid than that of air drying. The rates of solar drying with and without heat storage were nearly same. The drying rate of Douglas-fir was fastest and then faster in the order of sycamore, lauan, taun and oak. and the faster drying rate of species, the smaller differences of drying rates between thicknesses of lumber. The drying rates were fastest in the summer and slowest in the winter. The rates of solar drying during the spring were more slowly in the early stage and faster in the later stage than those during the autumn. 6. The final moisture contents were above 15% for 25mm-thick air dried and about 10% for solar dried lumber, but the mean final MCs for 50mm-thick lumber were much higher than those of thin lumber. The differences of final MC between upper and lower course of pile for solar drying were greater than those of pile for air drying. The differences of moisture content between the shell and the core of air dried lumbers were greater than those of solar dried lumber, smallest in the drying during summer and greatest in the drying during winter among seasons. 7. Casehardening stresses of 25mm- and 50mm-thick dried lumber were slight, casehardening stress of solar dried lumber was severer than that of air dried lumber and was similar between solar dried lumber with and without heat storage, Casehardening stresses of lumber dried during spring were slightest and then slighter in the order of summer, autumn, and winter. Casehardening stresses of Douglas -fir, sycamore and lauan were slight, comparing with those of taun and oak. 8. Maximum initial checks of 25mm-thick lumber occurred above and below fiber saturation point and those of 50mm-thick lumber occurred in the higher moisture content than thin lumber. As the moisture content decreased, most of checks were closed and didn't show distinct difference of the degree of checks among drying methods. The degree of checks were very slight in case of Douglas-fir and lauan, and severe in case of taun and oak. The degree of checks for 50mm-thick lumber were severer than those for 25mm-thick lumber. 9. The degree of warpage showed severe in case of oak and sycamore lumber, but no warping was found in case of Douglas-fir, lauan and taun. 10. The volumetric shrinkages of taun and oak were large and medium in case of Douglas-fir, lauan and sycamore. 11. Heat efficiencies of solar dryer with heat storage were 6.9% during spring, 7.7% during summer, 12.1% during autumn and 4.1% during winter season. Heat efficiency of solar dryer with heat storage was slightly greater than that of without heat storage. As moisture content of lumber decreased, heat efficiency decreased.

  • PDF

A Survey on the Utilization University Food Service by Student in Daejeon City (대전지역 대학생들의 대학급식소 이용실태 조사)

  • 박상욱;장영상
    • Korean journal of food and cookery science
    • /
    • v.14 no.4
    • /
    • pp.400-406
    • /
    • 1998
  • Questionnaire survey was done on the utilization status of college feeding facilities by students. Three hundred and nine students from three universities in Daejeon city, Korea participated in this survey. The results were summarized as followings. 1. Students who had experience of utilizing college feeding facilities were totalled to two hundred and ninety six. Among them 87.50% students were utilizing for lunch. Female students utilization ratio for lunch was 17.94% higher than male. College B students showed specially low utilization ratio. 2. Utilization frequency ratio of once per day was the highest as 30.72%. College C showed the highest utilization ratio. 3. Students utilized the campus food services most frequently as 47.97%, the restaurant outside campus the next and snack corner in the campus the last. 4. Reasons for the utilization were listed as low price, time saving, near place and no other place to eat. 5. Reasons for the not utilization were indicated as tasteless, simple menu and noisy and crowded. 6. Recommendations for the improvements of' college feeding facilities can be summarized to emphasize on taste, menu variation, sanitation, price decrease and comfortable atmosphere.

  • PDF

Clinical Outcome of Emergency Coronary Artery Bypass Grafting after Failed Percutaneous Transluminal Coronary Angioplasty (경피적 관상동맥 성형술의 실패에 의해 발생한 응급환자의 임상경과)

  • Kim, Do-Kyun;Yoo, Kyung-Jong;Youn, Young-Nam;Yi, Gi-Jong;Lee, Sak;Chang, Byung-Chul;Kang, Meyun-Shick
    • Journal of Chest Surgery
    • /
    • v.40 no.3 s.272
    • /
    • pp.209-214
    • /
    • 2007
  • Background: Failed percutaneous transluminal coronary angioplasty (PTCA) is occasionally required for emergency coronary artery bypass grafting (CABG). The aim of this study was to assess the outcome of patients receiving emergency CABG after failed PTCA. Material and Method: Between May 1988 and May 2005, 5712 patients underwent PTCA, where 84 (1.4%) failed. 27 patients underwent emergency CABG after failed PTCA. The mean age was $63.7{\pm}8.9\;(46{\sim}80)$ years, with 14 male patients (51.9%). Result: All patients underwent emergent surgical revascularization within 6 hours. 22 patients underwent conventional CABG and 5 underwent off-pump CABG. The causes of PTCA failure were coronary obstruction due to new thrombi formation during the procedure (n=4), coronary dissection (n=17), coronary artery rupture (n=3) and 3 due to other causes. The rate of in-hospital operative mortality after emergent operation was 18.5% (5/27). A univariate analysis revealed that patients who died more often had left anterior descending artery disease, a preprocedural shock status, postoperative use of multiple isotropics and postoperative use of intra-aortic balloon pump. The mean follow up duration was $53.6{\pm}63.4$ months. Conclusion: Although PTCA is known to be life saving, there is still a high risk for morbidity and mortality following emergency CABG after failed PTCA, despite the advancement in PTCA techniques. This result will help identify and more effectively treat patients selected for PTCA when emergency CABG is required.

Study on the Small Grain Bin for the Improvement of Grain Drying and Storage (곡물건조저장법 개선을 위한 농가용 Grain Bin에 관한 연구)

  • 김성래
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.16 no.1
    • /
    • pp.3263-3291
    • /
    • 1974
  • Experimental work of grain bin was carried out to develop the methods of natural air in-bin drying and storage. The method is considered to be more economical, labour saving, and an effective countermeasure to grain loss. To examine the possibility of farm use of the grain bin and to analyze the related factors concerned with in-bin grain drying and storage, ambient air conditions (especially the change of air temperature and relative humidity) and grain quality during drying and storage periods were investigated. A laboratory model bin was constructed to investigate the effect of different forced air conditions on the drying characteristics of rice. In addition, a grain bin with 2.2m diameter and 1.8m height, considered to be the optimum size for the average Korean farm, was constructed and tested to examine the drying and storing characteristics of rice. The weather data analyzed in this study was the nine-year (from 1964 to 1972) record of air temperature and relative humidity in the Suweon area, and the thirty-year (from 1931 to 1960) record of pentad normal relative humidity and air temperature in the Seoul area. From the results of the weather data analyses, the adequate air delivery hours (which was arbitrary defined as the condition to give less than 75% relative humidity) to dry the rice during October were about nine hours (from approximately 10 A.M. to 7 P.M, ) a day, in which the average air temperature was about 15.9$^{\circ}C$ and average relative humidity was 66%. The occurence of days having three hours of such conditions was 1, 2, and 1-day within the 1st, 2nd add last 10-day periods for the month of October, respectively. Therefore, it may be considered that the weather condition in October was satisfactory for the forced natural air drying. The results of the laboratory model bin test were analyzed to obtain the drying curve and drying rate for different drying stages and grain layers in the bin corresponding to various conditions of forced natural air. A drying experiment with a prototype grain bin showed that an approximate 5 percent grain moisture gradient through a 1.6 meter grain deposit was observed after 80 hours of intermittent drying, giving an over dried zone in the lower grain layers and an extremely high grain moisture zone in the upper layers. This indicates that an effective measure should be taken to reduce this high moisture gradient. In order to investigate the drying characteristics of bulk grain in a layerturning operation a grain bin test was performed. This showed a significant improvement of uniform drying. In this test, approximate 107 hours were required to dry a depth of 1.6 meter of grain from an initial moisture content of 22.2 percent to a moisture content of 16.7 percent using an air delivery rate of 2.8 cubic meter per a minute per every cubic meter of grain. This resulted in a 2 percent moisture gradient from the top to the bottom of the bin. During storage period, till the end of June the average temperature of grain was 2~3$^{\circ}C$ higher than ambient air temperature. But during July when the grain moisture content went up slightly (less than 1 percent), the average temperature of the grain also increased to 3~5$^{\circ}C$ higher than ambient air temperature. It is therefore recommended that for safe grain storage, grain should not be stored in sheet metal bins after mid May. From the above results, in-bin rice drying and storage can be used effectively on Korean farms. It is strongly recommended that the use of grain-bin system should be implemented for farm use to improve farm drying and storage of rice.

  • PDF

Comparison in Seed and Sprout Quality under Different Cropping Patterns in Mungbean (재배방식에 따른 녹두 종실과 나물의 품질변화)

  • Kim, Dong-Kwan;Son, Dong-Mo;Choi, Jin-Gyung;Shin, Hae-Ryong;Chon, Sang-Uk;Lee, Kyung-Dong;Jung, Ki-Yeol;Rim, Yo-Sup
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.56 no.3
    • /
    • pp.212-218
    • /
    • 2011
  • This study was performed to determine the relative quality of mungbeans harvested in bulk after applying a labor-saving cultivation (LSC) method, compared to mungbeans harvested three different times under the conventional cultivation condition. There was no significant difference in starch, crude protein, and vitexin or isovitexin content of seed according to the cropping system or harvest time. The mungbeans grown under the LSC method had the highest crude fat content, followed by mungbeans from the third-, the second- and the first-harvest mungbeans under the conventional cultivation. No significant difference was found in the composite ratio of saturated fatty acids to unsaturated fatty acids according to cropping system or harvest time. The second-harvest mungbeans grown under the conventional cultivation condition had 17 different types of fatty acids, while the third-harvest mungbeans grown under the conventional cultivation and those grown under the LSC condition had the fewest types of fatty acids with 12. Of the major saturated fatty acids, palmitic acid and arachidonic acid had the highest composite ratio in the first conventional cultivation followed by the second, the third and the LSC. However, stearic acid showed the opposite tendency. Of the major unsaturated fatty acids, linoleic acid had the highest composite ratio in the first conventional cultivation, followed by the second and third conventional cultivation and the LSC. Amylogram characteristics of the mungbeans were significantly different according to cropping system and harvest times. The mungbeans harvested after the first conventional cultivation had significantly higher pasting temperature, peak viscosity, holding strength viscosity, final viscosity and breakdown, while mungbeans harvested after the third conventional cultivation had significantly higher setback viscosity. In contrast, the mungbeans harvested under the LSC methods had a significantly lower amylogram value. When harvest rate, color values and amino acid content of sprout were measured, mungbeans grown under the LSC conditions had a low harvest rate of sprout, but had Hunter's color values and amino acid content of sprout similar to those of mungbeans grown under the conventional cultivation condition.

Life-Sustaining Procedures, Palliative Care, and Cost Trends in Dying COPD Patients in U.S. Hospitals: 2005~2014

  • Kim, Sun Jung;Shen, Jay;Ko, Eunjeong;Kim, Pearl;Lee, Yong-Jae;Lee, Jae Hoon;Liu, Xibei;Ukken, Johnson;Kioka, Mutsumi;Yoo, Ji Won
    • Journal of Hospice and Palliative Care
    • /
    • v.21 no.1
    • /
    • pp.23-32
    • /
    • 2018
  • Purpose: Little is known regarding the extent to which dying patients with chronic obstructive pulmonary disease (COPD) receive life-sustaining procedures and palliative care in U.S. hospitals. We examine hospital cost trends and the impact of palliative care utilization on the use of life-sustaining procedures in this population. Methods: Retrospective nationwide cohort analysis was performed using National Inpatient Sample (NIS) data from 2005 and 2014. We examined the receipt of both palliative care and intensive medical procedures, defined as systemic procedures, pulmonary procedures, or surgeries using the International Classification of Diseases, 9th revision (ICD-9-CM). Results: We used compound annual growth rates (CAGR) to determine temporal trends and multilevel multivariate regressions to identify factors associated with hospital cost. Among 77,394,755 hospitalizations, 79,314 patients were examined. The CAGR of hospital cost was 5.83% (P<0.001). The CAGRs of systemic procedures and palliative care were 5.98% and 19.89% respectively (each P<0.001). Systemic procedures, pulmonary procedures, and surgeries were associated with increased hospital cost by 59.04%, 72.00%, 55.26%, respectively (each P<0.001). Palliative care was associated with decreased hospital cost by 28.71% (P<0.001). Conclusion: The volume of systemic procedures is the biggest driver of cost increase although there is a cost-saving effect from greater palliative care utilization.

Actual State of Structures and Environmental Control Facilities for Tomato Greenhouses in Chungnam Region (충남지역 토마토 재배온실의 구조와 환경조절설비 실태분석)

  • Nam, Sang-Woon;Kim, Young-Shik
    • Korean Journal of Agricultural Science
    • /
    • v.36 no.1
    • /
    • pp.73-85
    • /
    • 2009
  • An investigation was conducted to get the basic data for establishing structural safety and environmental management of tomato greenhouses in Chungnam region. The contents of the investigation consisted of actual state of greenhouse structures and environmental control facilities. Most of greenhouses were arch type single-span plastic houses and they had too low height for growing tomatoes. Frameworks of multi-span greenhouses were suitable, but those of single-span were mostly insufficient. Every greenhouse had thermal curtain movable or covering fixed inside the greenhouse for energy saving, and heating facilities were mostly warm air heater. Irrigation facilities were mostly drip tube and controlled by manual operation or timer. Almost all of the greenhouses didn't install high level of environmental control facilities such as ventilator, air circulation fan, $CO_2$ fertilizer, insect screen, supplemental light, and cooling device.

  • PDF

Mediating Effects of Perceived Value on the Relationship between University Foodservice Quality Attributes and Satisfaction of Chinese Students in Daejeon (대학급식 서비스 품질 속성과 고객만족 관계에서 고객가치의 매개효과 -대전지역 중국유학생을 중심으로-)

  • Yi, Na-Young
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.44 no.11
    • /
    • pp.1750-1758
    • /
    • 2015
  • The purposes of this study were to investigate the effects of university foodservice quality attributes on Chinese students' satisfaction, as well as the mediating effects of perceived value on the relationship between foodservice quality attributes and satisfaction. A total of 250 university students in Daejeon were surveyed, and 216 responses were returned. Excluding responses with significant missing data, 196 responses were used for data analysis. The reasons for using university foodservice were 'meal plan' (37.8%) and 'time saving' (22.4%), whereas the reasons for not using university foodservice were 'untasty food' (33.2%) and 'limited menu selection' (27.6%). Results confirm that enhanced performance of food quality, service quality, sanitation, and convenience had favorable effects on perceived value and satisfaction. Further, perceived value had a significant positive influence on satisfaction. In analyzing the mediating role, the effect of foodservice quality attributes on satisfaction was partially mediated by perceived value.

A Proposed Algorithm and Sampling Conditions for Nonlinear Analysis of EEG (뇌파의 비선형 분석을 위한 신호추출조건 및 계산 알고리즘)

  • Shin, Chul-Jin;Lee, Kwang-Ho;Choi, Sung-Ku;Yoon, In-Young
    • Sleep Medicine and Psychophysiology
    • /
    • v.6 no.1
    • /
    • pp.52-60
    • /
    • 1999
  • Objectives: With the object of finding the appropriate conditions and algorithms for dimensional analysis of human EEG, we calculated correlation dimensions in the various condition of sampling rate and data aquisition time and improved the computation algorithm by taking advantage of bit operation instead of log operation. Methods: EEG signals from 13 scalp lead of a man were digitized with A-D converter under the condition of 12 bit resolution and 1000 Hertz of sampling rate during 32 seconds. From the original data, we made 15 time series data which have different sampling rate of 62.5, 125, 250, 500, 1000 hertz and data acqusition time of 10, 20, 30 second, respectively. New algorithm to shorten the calculation time using bit operation and the Least Trimmed Squares(LTS) estimator to get the optimal slope was applied to these data. Results: The values of the correlation dimension showed the increasing pattern as the data acquisition time becomes longer. The data with sampling rate of 62.5 Hz showed the highest value of correlation dimension regardless of sampling time but the correlation dimension at other sampling rates revealed similar values. The computation with bit operation instead of log operation had a statistically significant effect of shortening of calculation time and LTS method estimated more stably the slope of correlation dimension than the Least Squares estimator. Conclusion: The bit operation and LTS methods were successfully utilized to time-saving and efficient calculation of correlation dimension. In addition, time series of 20-sec length with sampling rate of 125 Hz was adequate to estimate the dimensional complexity of human EEG.

  • PDF