• 제목/요약/키워드: saturation point

검색결과 335건 처리시간 0.021초

Split-Capacitor Dual-Active-Bridge 컨버터 (Split-Capacitor Dual-Active-Bridge Converter)

  • 김기수;박시호;차헌녕;최병조
    • 전력전자학회논문지
    • /
    • 제23권5호
    • /
    • pp.352-358
    • /
    • 2018
  • A split-capacitor (SC) dual-active-bridge (DAB) converter is proposed in this study. The DC-link capacitors of input and output are split in the proposed converter. The primary and secondary windings of transformer are connected to the midpoints of the DC-links. Hence, the SC DAB converter can inherently prevent transformer from saturation. Although the switch current stress of the proposed converter is twice that of the conventional DAB converter, the switch voltage stress is reduced by half. Therefore, the proposed converter can reduce switching loss and achieve high efficiency in a high switching frequency. Given the SC structure, the proposed converter can readily be connected to neutral-point-clamped- or half-bridge-type converters. The topology of the proposed converter is presented and the operating principle is analyzed in detail. A 3-kW hardware prototype was built and tested to verify the performance of the proposed converter.

상수 원수 수질의 탄산칼슘 포화지수 평가 (Evaluation of Calcium Carbonate Saturation Indices in Water)

  • 황병기
    • 한국산학기술학회논문지
    • /
    • 제8권1호
    • /
    • pp.130-135
    • /
    • 2007
  • 국내 수질의 부식성을 파악하기 위해 RTW 모델과 LPLWIN 모델을 이용하여 탄산칼슘포화지수를 포함한 다양한 지수를 산정하는 절차를 연구하였다. RTW 모델을 이용하여 LI, RI, AI 를 산정할 수 있었고, LPLWIN 모델을 이용하여 LI, LR, CCPP를 산정하였다. 한강 수계와 낙동강 수계를 취수원으로 하는 수돗물 자료를 적용하여 지수값에 근거하여 부식성 여부를 판단하였다. 산정결과에 의하면, 낙동강 수계는 한강수계보다 부식성이 양호한 수질인 것으로 나타났다. 겨울철이 여름철에 비하여 부식성이 큰 것으로 나타나, 온도가 증가할수록 부식성은 감소하는 것으로 조사되었다.

  • PDF

Characteristic Analysis and Experimental Verification of the Axially Asymmetric Structured Outer-Rotor Type Permanent Magnet Motor

  • Seo, Myung-Ki;Lee, Tae-Yong;Park, Kyungsoo;Kim, Yong-Jae;Jung, Sang-Yong
    • Journal of Electrical Engineering and Technology
    • /
    • 제11권4호
    • /
    • pp.898-904
    • /
    • 2016
  • In this study, we have dealt with a design characteristic of outer-rotor type permanent magnet (PM) motor applied for Engine Cooling Fan (ECF). When we design a motor with structure like this type, it is required as a requisite to consider 3-Dimensional (3-D) effect by implementing a non-linear Finite Element Analysis (FEA) due to a yoke-ceiling, which is perpendicular to the axis of rotation. We have analyzed identical models under three different conditions. The analysis has been performed through a non-linear 2-Dimensional (2-D) and 3-D FEA. Finally, the results have been compared with Back Electro-Motive Force (BEMF) value of actual motor model. As a result, a yoke-ceiling function as an additional flux path and the operating point on B-H curve of rotor material is shifted to non-saturation region relatively. Accordingly, magnetic flux linkage can be increased and motor size can be decreased under same input condition to satisfy ECF specification, such as torque.

Resonance Investigation and Active Damping Method for VSC-HVDC Transmission Systems under Unbalanced Faults

  • Tang, Xin;Zhan, Ruoshui;Xi, Yanhui;Xu, Xianyong
    • Journal of Power Electronics
    • /
    • 제19권6호
    • /
    • pp.1467-1476
    • /
    • 2019
  • Grid unbalanced faults can cause core saturation of power transformer and produce lower-order harmonics. These issues increase the electrical stress of power electronic devices and can cause a tripping of an entire HVDC system. In this paper, based on the positive-sequence and negative-sequence impedance model of a VSC-HVDC system as seen from the point of common connection (PCC), the resonance problem is analyzed and the factors determining the resonant frequency are obtained. Furthermore, to suppress over-voltage and over-current during resonance, a novel method using a virtual harmonic resistor is proposed. The virtual harmonic resistor emulates the role of a resistor connected in series with the commutating inductor without influencing the active and reactive power control. Simulation results in PSCAD/EMTDC show that the proposed control strategy can suppress resonant over-voltage and over-current. In addition, it can be seen that the proposed strategy improves the safety of the VSC-HVDC system under unbalanced faults.

Implementation of Intelligent Electronic Acupuncture Needles Based on Bluetooth

  • Han, Chang Pyoung;Hong, You Sik
    • International journal of advanced smart convergence
    • /
    • 제9권4호
    • /
    • pp.62-73
    • /
    • 2020
  • In this paper, we present electronic acupuncture needles we have developed using intelligence technology based on Bluetooth in order to allow anyone to simply receive customized remote diagnosis and treatment by clicking on the menu of the smartphone regardless of time and place. In order to determine the health condition and disease of patients, we have developed a software and a hardware of electronic acupuncture needles, operating on Bluetooth which transmits biometric data to oriental medical doctors using the functions of automatically determining pulse diagnosis, tongue diagnosis, and oxygen saturation; the functions are most commonly used in herbal treatment. In addition, using fuzzy logic and reasoning based on smartphones, we present in this paper an algorithm and the results of completion of hardware implementation for electronic acupuncture needles, appropriate for the body conditions of patients; the algorithm and the hardware implementation are for a treatment time duration by electronic acupuncture needles, an automatic determinations of pulse diagnosis, tongue diagnosis, and oxygen saturation, a function implementation for automatic display of acupuncture point, and a strength adjustment of electronic acupuncture needles. As a result of our simulation, we have shown that the treatment of patients, performed using an Electronic Acupuncture Needles based on intelligence, is more efficient compared to the treatment that was performed before.

Photosynthetic Characteristics of Resistance and Susceptible Lines to High Temperature Injury in Panax ginseng Meyer

  • Lee, Joon-Soo;Lee, Dong-Yun;Lee, Jang-Ho;Ahn, In-Ok;In, Jun-Guy
    • Journal of Ginseng Research
    • /
    • 제36권4호
    • /
    • pp.461-468
    • /
    • 2012
  • In this study, photosynthetic parameters such as the net photosynthesis rate, stomatal conductance, intercellular $CO_2$ concentration, and transpiration rate were examined in selected ginseng varieties and/or lines that are resistant (Yunpoong, HTIR 1, HTIR 2, and HTIR 3) and susceptible (Chunpoong) to high temperature injury (HTI). The net photosynthesis rate increased with the increase in the light intensity in all the HTI-resistant and -susceptible ginseng lines with a light saturation point of $200\;{\mu}mol\;m^{-2}s^{-1}$, except for Yunpoong that had a light saturation point of $400\;{\mu}mol\;m^{-2}s^{-1}$. At the light saturation point, the net photosynthesis rate in July was highest in HTIR 3, at $4.2\;{\mu}mol\;CO_2\;m^{-2}s^{-1}$, and was lowest in Yunpoong, HTIR 1, Chunpoong, and HTIR 2, in that order, at 1.9 to $3.7\;{\mu}mol\;CO_2\;m^{-2}s^{-1}$. The net photosynthesis rate in August was highest in Yunpoong at $5.9\;{\mu}mol\;CO_2\;m^{-2}s^{-1}$, and lowest in HTIR 1 and HTIR 3 ($4.5\;{\mu}mol\;CO_2\;m^{-2}s^{-1}$) and in other lines, in that order, at 2.8 to $2.9\;{\mu}mol\;CO_2\;m^{-2}s^{-1}$. The stomatal conductance in July was highest in HTIR 3 (0.055 mol $H_2O\;m^{-2}s^{-1}$) and Yunpoong, Chunpoong, HTIR 1, and HTIR 2 were 0.038, 0.037, 0.031, and 0.017 in that orders. In August, meanwhile, HTIR 1 showed the highest as 0.075, and followed by HTIR 3, Chungpoong, and HTIR 2 with 0.070, 0.047, and 0.023, respectively. The intercellular $CO_2$ concentration at the light saturation point in July and August was much lower in HTIR 2 at 139 and $185\;{\mu}mol\;mol^{-1}$ than in the other ginseng lines at 217 to 257 and 274 to $287\;{\mu}mol\;mol^{-1}$, respectively. The transpiration rate in July and August was higher in the HTI-resistant lines of Yunpoong, HTIR 1, and/or HTIR 3 at 0.83 to 1.03 and 1.67 to 2.10 mol $H_2O\;m^{-2}s^{-1}$ than in the other ginseng lines at 0.27 to 0.79 mol $H_2O\;m^{-2}s^{-1}$ and 0.51-1.65 mol $H_2O\;m^{-2}s^{-1}$, respectively. Conclusively, all the photosynthetic parameters that were examined in this study were generally higher in the HTI-resistant ginseng lines than in the HTI-susceptible lines, except for HTIR 2, and were much higher in August than in July, especially in the resistant ginseng lines. All these results can be used to provide basic information for the selection of HTI-resistant ginseng lines and the application of cultural practices that are efficient for ginseng growth, based on the photosynthetic characteristics of the lines.

실내 모형과 현장 충적층에서 지하투과레이더를 이용한 지하수면 추정 (Estimation of Groundwater Table using Ground Penetration Radar (GPR) in a Sand Tank Model and at an Alluvial Field Site)

  • 김병우;김형수;최두형;고용권
    • 지질공학
    • /
    • 제23권3호
    • /
    • pp.201-216
    • /
    • 2013
  • 지하수면과 불포화대의 수분 포화도가 지하투과레이더(GPR) 신호에 미치는 영향을 연구하기 위하여 실내 토조와 충적층 현장에서 GPR 조사를 수행하였다. 실내의 모래 채움 토조 실험에서, 지하수위를 변화시키기 위해 물을 탱크 바닥에 설치된 밸브를 통해 주입하고 배수시켰다. 지하수위와 수분포화도를 추정하기 위하여 모래 채움 토조에서 GPR 수직반사법(이후, VRP) 자료가 획득되었다. 실내 모래 채움 토조에서 획득된 GPR 신호는, 지하수위는 물론 함수율 변화에도 민감하게 반응함을 보여준다. 불포화대에서 GPR 속도는 함수율 변화에 따라 크게 조절되며, 주시 시간의 증가는 포화도의 증가로 해석된다. 함안군 이룡리 낙동강변 충적층에서 220m에 달하는 VRP 조사가, 지하수위를 추정하기 위하여 수행되었다. 현장 조사 결과, 포화 조건에서 GPR 신호의 첫 번째 반사면은 모관 상승에 의한 경계부를 지시하며, 실제 지하수면과는 차이가 있음을 지시한다. 보다 정확한 지하수위를 추정하기 위하여, Well-3호공 주변에서 중앙공심점(common mid-point, 이후, CMP) 방식 GPR 조사를 수행하였다. 그 결과, 모관 상승 경계부와 지하수면으로부터 반사되는 CMP 자료는 쌍곡선 형태를 보였다. NMO(nomal move-out) 보정을 통해, CMP 조사 자료로부터 GPR 신호의 속도를 구하였고, 이는 보다 상세한 지하수면과 심도별 포화도 정보를 제공하였다. 지하수면과 포화도 정보를 포함하는 GPR 조사결과는 통기대의 현장 수리 지질학적 특성 조사에 유용한 수단이다.

Renewable Low-viscosity Dielectrics Based on Vegetable Oil Methyl Esters

  • Yu, Hui;Yu, Ping;Luo, Yunbai
    • Journal of Electrical Engineering and Technology
    • /
    • 제12권2호
    • /
    • pp.820-829
    • /
    • 2017
  • Vegetable oil dielectrics have been used in transformers as green alternatives to mineral insulating oils for about twenty years, because of their advantages of non-toxic, biodegradability, and renewability. However, the viscosity of vegetable oils is more than 3 times of mineral oils, which means a poor heat dissipation capacity. To get low-viscosity dielectrics, transesterification and purification were performed to prepare vegetable oil methyl esters in this study. Electrical and physical properties were determined to investigate their potential as dielectrics. The results showed that the methyl ester products had good dielectric strengths, high water saturation and enough fire resistance. The viscosities (at $40^{\circ}C$) were 0.2 times less than FR3 fluid, and 0.7 times less than mineral oil, which indicated superior cooling capacity as we expected. With the assistance of 0.5 wt% pour point depressants, canola oil methyl ester exhibited the lowest pour point ($-26^{\circ}C$) among the products which was lower than FR3 fluid ($-21^{\circ}C$) and 25# mineral oil ($-23^{\circ}C$). Thus, canola oil methyl ester was the best candidate as a low-viscosity vegetable oil-based dielectric. The low-viscosity fluid could extend the service life of transformers by its better cooling capacity compared with nature ester dielectrics.

자철석의 저온 자화특성 (Magnetic Properties of Magnetites at Low Temperatures)

  • 홍화빈;유용재
    • 한국광물학회지
    • /
    • 제24권1호
    • /
    • pp.37-42
    • /
    • 2011
  • 지구의 암권에서 가장 중요한 자성광물은 자철석이다. 암석 내에 존재하는 자철석의 성분과 입자 크기에 관한 정보를 알아내는데 저온 자화특성을 이용하려 한다. 물리적 방법의 하나인 저온 자화특성 실험은 비파괴적이며 운석과 같이 연구 대상 시료의 수량이 제한된 경우 특히 유용하게 사용된다. 금번 연구에서는 세 종류의 합성 자철석 시료와 세 종류의 자철석 함유 암석 시료에 대해 저온포화잔류자화의 가열실험과 실온포화잔류자화의 냉각/가열 실험을 수행하였다. 실험 결과 저온포화잔류자화는 가열함에 따라 자철석의 버웨이변환온도(~105~120 K)를 지나며 급격히 감소한다. 자철석의 버웨이변환온도와 등방점(135 K)를 모두 거치는 실온포화잔류자화의 냉각과 가열 실험 결과에서는 저온포화잔류자화의 가열 실험 결과와 비교하였을 때 자화회복력이 뛰어나고, 자화상실이 상대적으로 완만히 진행된다. 저온포화잔류자화와 실온포화잔류자화 모두 자철석의 입자 크기가 증가할수록 소실되는 포화잔류자화의 비가 증가한다. 결국 저온포화잔류자화기억도와 실온포화잔류자화기억도 모두 자철석의 입자가 커질수록 감소한다. 따라서 저온 자화특성을 이용하면 암석 내 자철석 입자의 크기를 비파괴적인 방법으로 유추할 수 있다.

Open-Loop-Onset-Point PIO 해석의 변위한계 (Handling Deflection Limit in Open-Loop-Onset-Point PIO Analysis)

  • 박상혁
    • 한국항공우주학회지
    • /
    • 제38권2호
    • /
    • pp.135-140
    • /
    • 2010
  • 항공기 조종면의 시간당 변화율 한계에 의한 PIO 현상을 해석하는 기법으로 Open-Loop-Onset-Point (OLOP) 방법이 널리 이용된다. OLOP은 조종면의 변화율 한계에 의한 PIO 현상을 주원인으로 포함하고 더 나아가 조종면 구동기의 변위한계도 고려하는 데, 여기서는 이 변위 한계를 고려하는 새로운 방법을 제시하고자 한다. 새로운 기법은 독립된 구동기의 주파수 응답을 고려할 때, 기존의 OLOP 방법이 제시한 바와 달리, 변화율 한계가 시작되는 주파수가 변위 한계에 의해 더 높은 주파수로 지연되지 않는다는 사실을 인지함으로써 그 동기가 되었다. 실제로 피드백 제어 환경에서는 변화율 한계의 시작점이 오히려 더 낮은 주파수에서 일어나는데, 이는 변위 한계의 영향에 의한 제어력 감소분을 극복하기위해 제어기가 더 큰 제어 입력을 발생하기 때문이다. 본 연구는 이렇게 찾아진 변화율 시작 주파수와 변위 한계를 고려하여 OLOP 해석의 최종 단계에서 Nichols Chart 위에 변화율 시작점을 찾는 새로운 방법을 제시한다. 마지막으로 기존의 방법으로는 PIO 예측에 있어서 위험한 판단에 도달할 수 있으나, 제시된 새로운 방법으로는 올바른 예측을 할 수 있음을 보여준다.