• 제목/요약/키워드: satellite transmission

검색결과 475건 처리시간 0.027초

SDR 수신기를 이용한 위성항법 기만신호 효과도 분석 (Analysis on GNSS Spoofing signal effects using SDR receiver)

  • 조지행
    • 한국인터넷방송통신학회논문지
    • /
    • 제19권2호
    • /
    • pp.97-102
    • /
    • 2019
  • 위성항법 시스템은 민간 분야뿐만 아니라 군의 다양한 무기체계에서 위치 및 시각 동기화 등의 중요한 정보를 제공하는 역할을 수행하고 있으며 활용분야와 의존도가 높아지고 있다. 이에 따라, 위성항법 장치를 활용하는 무기체계에 대응하기 위해 전자파를 방사하여 위성항법장치를 기만하고자 하는 연구가 활발히 이루어지고 있다. 위성항법 기만신호는 수신기에 전파 교란신호를 방사하여 항법을 하지 못하도록 하거나 허위 위치와 속도로 오인하도록 유도하는 기술을 의미한다. 그 중 스푸핑 기술은 기만하고자 하는 수신기에서 수신하고 있는 코드 위상/도플러 주파수/항법 메시지와 동기되어 위성항법 신호 대신 기만신호를 획득하고 추적할 수 있도록 신호를 송신해주는 것이다. 본 논문에서는 SDR 수신기를 이용하여 GPS L1 C/A 기만신호에 의한 수신기 추적 알고리즘 영향성을 분석하고 기만 신호에 대한 효과도를 분석하였다.

단계적 임계치 결정을 통한 위성레이더이미지 내 선박 탐지 (Ship Detection from Satellite Radar Imagery using Stepwise Threshold Determination)

  • 전호군;조홍연
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2023년도 춘계학술대회
    • /
    • pp.152-153
    • /
    • 2023
  • 선박자동식별장치(AIS)는 데이터의 활용편의성으로 인해 해상교통평가에 많이 사용되어 왔다. 그러나 AIS는 지형물에 의한 전파방해, 도달거리 한계로 인해 거리에 따라 선박위치가 누락되는 문제가 있다. 한편 위성레이더를 이용하면 이러한 문제로부터 자유롭게 광범위한 해양영역에 분포한 선박위치를 파악할 수 있다. 이 연구에서는 합성개구레이더 Sentinel-1 이미지에 단계적으로 임계치를 결정하여 선박을 탐지하는 방법을 제시한다. 제시된 방법은 기존의 이동창 기반 임계치 결정방법에 비해 최대 25배 빠른 탐지 속도를 보였으며, AIS와의 매칭률에서는 유사한 결과를 보였다.

  • PDF

정지궤도위성 운영을 위한 향상된 S-band 원격명령어 및 원격측정데이터 포맷에 대한 연구 (Study on the Advanced S-band Telecommand and Telemetry Formats for the Geostationary Orbit Satellites Operation)

  • 이나영;신현규;천이진;최재동
    • 한국항공우주학회지
    • /
    • 제49권5호
    • /
    • pp.417-424
    • /
    • 2021
  • 정지궤도위성의 원격데이터 통신 포맷은 제한된 통신 속도 대비 대량으로 생성되는 위성 데이터를 효율적으로 수신하고, 36,000km 고도에서 운영되는 정지궤도위성의 원격명령어 수신 결과를 정확하게 확인하기 위해 설계된다. 한국항공우주연구원에서 개발하여 2018년과 2020년에 각각 발사 및 운영 중인 천리안2A호와 2B호는 한국 최초의 정지궤도위성인 천리안1호의 임무를 연속하여 수행하도록 설계되었다. 따라서 정지궤도위성과 지상국의 안정적이고 효율적인 원격 통신을 위해 필요한 원격 통신 설계 요소들을 승계하였다. 한편, 원격 데이터의 처리 및 운영을 담당하는 천리안 2A호와 2B호의 탑재소프트웨어는 다목적위성시리즈를 통해 그 성능이 더욱 개선되어 왔으며 최신의 원격 데이터 처리 및 운영 알고리즘이 구축되어 있다. 본 논문에서는 정지궤도위성의 향상된 원격 데이터 송수신을 위한 원격명령어 및 원격측정데이터의 포맷 및 운영 개념 설계를 제안하고, 실제 천리안 2A호와 2B호의 탑재소프트웨어에 적용된 내용들을 상세하게 기술한다.

비선형 위성 채널에서 QAM-OFDM 방식의 적용에 관한 연구 (The Study on The Application of QAM-OFDM Scheme for Nonlinear Satellite Channel)

  • 이해선
    • 전자공학회논문지 IE
    • /
    • 제45권1호
    • /
    • pp.44-49
    • /
    • 2008
  • 본 논문에서는 중계기의 군 지연 및 이득 변동 특성을 포함한 비선형 위성 채널에서 다중 레벨 QAM 방식을 적용한 OFDM 기반 시스템에 대하여 성능을 분석하였다. 일반적인 OFDM을 적용하는 경우와 반송파 간섭 OFDM을 적응하는 경우를 부가 백색 가우시안 잡음 환경에서 지정된 위성 채널의 비선형 정도에 대하여 적용한 QAM 방식에 따른 BER 성능을 비교하여 성능 개선 정도를 제시하였다. 36MHz 대역폭의 중계기 채널에 120Mbps 전송률의 정보를 QPSK, 8QAM, 16QAM, 32QAM, 64QAM을 사용하여 전송하는 경우에 대하여 위성 채널의 특성을 통상적인 경우와 최악 조건의 경우로 나누어 모의실험을 적용하였다. 모의실험 결과를 통하여 통상적인 채널 환경에서 고차 레벨의 QAM을 적용하는 경우에 반송파 간섭 OFDM에 의한 개선 정도가 이득 변동 특성보다는 성능 열화에 상대적으로 심각한 영향을 미치는 군 지연과 고출력 증폭기의 비선형 특성에 의한 개선 정도가 두드러지게 나타남을 확인할 수 있었다. 아울러 최악의 조건의 경우에 32QAM 이상의 QAM-OFDM을 적용하는 경우에는 채널 부호화나 비선형 특성의 보상 방법과 같은 추가의 기법이 필요함을 알 수 있었다.

Carrier Complex Power Series를 이용한 K-대역 위성 TWTA용 반사형 다이오드 구조의 전치왜곡 선형화기 (K-band Predistortive Linearizer of Reflective Diode Structure for Satellite TWTA Using Carrier Complex Power Series)

  • 정희영;정용채;염인복
    • 한국전자파학회논문지
    • /
    • 제16권6호
    • /
    • pp.644-651
    • /
    • 2005
  • 본 논문은 진행파관 증폭기의 비선형성을 줄이기 위해 새로운 전치 왜곡 방법을 제안하였다. 진행파관 증폭기의 비선형 전달 특성은 carrier complex power series를 이용하여 해석하였고, 이를 선형화하기 위한 전치 왜곡 선형화기의 전달 특성을 inverse complex power series로 해석하였다. Schottky 다이오드와 전송 선로 종단에 부착된 부하 저항을 반사형 구조로 만듦으로 전치 왜곡기의 비선형 왜곡 특성을 얻을 수 있었다. 제안된 선형화기를 적용하여 K-대역용 진행파관 증폭기의 AM-to-AM 및 AM-to-PM 특성 을 각각 -5.825 dB과 $-37.321^{\circ}$에서 0.786 dB과 $6.742^{\circ}$로 개선시켰다.

Throughput Analysis of SBC for MSC on KOMPSAT-2

  • Heo H.P.;Kong J.P.;Kim Y.S.;Park J.E.;Chang Y.J.;Lee S.H.
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
    • /
    • pp.593-596
    • /
    • 2005
  • The MSC is a remote sensing instrument with very high performance that is to be installed on KOMPSAT2 satellite. The MSC consists of EOS (Electro-Optic Subsystem), PMU (Payload Management Unit) and PDTS (Payload Data Transmission Subsystem). PMU controls and monitors all the other payload units by sending commands and collecting telemetry. PMU is in charge of interfacing between payload system and satellite bus system. PMU gets commands from ground-station via OBC (On-Board Computer) that is a main controller of the satellite bus system and sends telemetry to the ground-station via OBC. There is a processor module, called SBC (Single Board Computer) in the PMU. The SBC is a main controller of the MSC system. The main roles of the SBC are payload mission management, command validation and execution, telemetry collection and monitoring, ancillary data handling, event reporting, power control of payload sub-units and communication with these units. Intel's 80486DX2 processor has been used for the SBC. Due to the fact that the SBC plays important roles for imaging mission execution and handles a lot of control data that is required for payload operation, it is required to make analysis of the CPU load when it is in maximum operation mode. In this paper, the analysis and measurement results of the SBC throughput in the maximum operation mode.

  • PDF

Single-axis Hardware in the Loop Experiment Verification of ADCS for Low Earth Orbit Cube-Satellite

  • Choi, Minkyu;Jang, Jooyoung;Yu, Sunkyoung;Kim, O-Jong;Shim, Hanjoon;Kee, Changdon
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제6권4호
    • /
    • pp.195-203
    • /
    • 2017
  • A 2U cube satellite called SNUGLITE has been developed by GNSS Research Laboratory in Seoul National University. Its main mission is to perform actual operation by mounting dual-frequency global positioning system (GPS) receivers. Its scientific mission aims to observe space environments and collect data. It is essential for a cube satellite to control an Earth-oriented attitude for reliable and successful data transmission and reception. To this end, an attitude estimation and control algorithm, Attitude Determination and Control System (ADCS), has been implemented in the on-board computer (OBC) processor in real time. In this paper, the Extended Kalman Filter (EKF) was employed as the attitude estimation algorithm. For the attitude control technique, the Linear Quadratic Gaussian (LQG) was utilized. The algorithm was verified through the processor in the loop simulation (PILS) procedure. To validate the ADCS algorithm in the ground, the experimental verification via a single axis Hardware-in-the-loop simulation (HILS) was used due to the simplicity and cost effectiveness, rather than using the 3-axis HILS verification (Schwartz et al. 2003) with complex air-bearing mechanism design and high cost.

위성 중계기 특성을 감안한 OFDM 기반 위성 통신 시스템의 성능 개선 (The Performance Improvement of the OFDM Based Satellite Communication System with the Consideration of Transponder Characteristics)

  • 이해선
    • 한국전자파학회논문지
    • /
    • 제18권10호
    • /
    • pp.1196-1202
    • /
    • 2007
  • 본 논문에서는 위성 중계기의 비선형 특성을 포함한 군 지연 및 이득 변동 특성을 감안하여 OFDM 기반 위성통신 시스템에 반송파 간섭 OFDM 및 채널 부호화를 적용하여 성능을 비교함으로써 개선 효과를 분석하였다. 일반적인 OFDM을 적용하는 경우와 반송파 간섭 OFDM을 적용하는 경우를 부가 백색 가우시안 잡음 환경에서 중계기의 특성과 지정된 입력 backoff 상태에 따른 BER 성능을 비교하여 성능 개선 정도를 제시하였다. 36 MHz 대역폭의 중계기 채널에 120 Mps 전송률의 정보를 16 QAM을 사용하여 전송하는 경우에 대하여 중계기의 특성이 이상적인 경우와 최악 조건의 경우로 나누어 모의실험을 적용하였다. 모의실험 결과를 통하여 중계기 내의 성능 열화에 상대적으로 심각한 영향을 미치는 군 지연과 비선형 특성에 대한 반송파 간섭 OFDM과 채널 부호화에 의한 개선 정도가 두드러지게 나타남을 알 수 있었다. 또한, 최악의 조건으로 근접할수록 적용한 채널 부호화에 의한 개선보다 반송파 간섭 OFDM에 의한 개선 효과가 더욱 커짐을 확인할 수 있었다.

B-ISDN용 광휘성통신 다운링크의 앙각에 따른 수신안테나 개선에 관한 연구 (A study on the improvement of receiver antenna as elevation angle on optical satellite communication downlink for B-ISDN)

  • 이상규;한종석;정진호;김영권
    • 전자공학회논문지A
    • /
    • 제32A권3호
    • /
    • pp.1-9
    • /
    • 1995
  • In the B-ISDN using satellite between geo-satellites and earth stations, the laser having high security and broad band width has to be used as a carrier for transmitting massive information of visual, vocal, and high rate data. In this paper, by computer simulation we analyzed the number of optical detector array of optical satellite communication downlink in case of using channel coding and no channel coding for BISDN between geo-satelites and earth stations under clear weather condition. It was supposed that 1 watt semiconductor laser was used and as modulation method, the binary FSK was used. The data rate of 10Gbps was used for B-ISDN. Also, hardly affected by atmospheric absorption 1.55$\mu$m wave-length was used to reduce influence of dispersion and chirp generated at a high speed transmission. We analyzed the received power, SNR and BER. The number of optical detector array was determined to satisfy for the BER less than 10$^{-7}$. Also, we ananlyzed the possibility of reducting the number of optical detector array in case of using channel coding. the number of optical detector array is one in the region where the elevation nangle is between 38$^{\circ}$ and 90$^{\circ}$ and two where the elevation angle is between 33$^{\circ}$ and 37$^{\circ}$ and three where the elevation angle is between 30$^{\circ}$ and 32$^{\circ}$ and increases per one as the elevation angle decreases per 1.deg.. So in the region where the elevation angle is 25$^{\circ}$, the number of optical detector arrays is eight. In case of using channel coding, the number of optical detector arrays decreases to five in the region where the elevation angle is 25$^{\circ}$. Therefore, we remaark the advantage of the channelcoding to decrease the size of received antenna and the number ob optical detector arrays.

  • PDF

L대역 군위성 중계기 경량화를 위한 메타재질기반 소형 이중대역 3분기 전력분배기의 설계 (Design of a Metamaterial-Based Compact Dual-Band 3-way Power Divider for Lighter L-band Military Satellite Transceivers)

  • 강경석;양인규;장경남;이호섭;김형종;강승택
    • 전기학회논문지
    • /
    • 제62권12호
    • /
    • pp.1712-1718
    • /
    • 2013
  • This paper proposes a compact dual-band 3-way power divider that helps lowering the weight of a transceiver for the L-band or multi-purpose satellite communication. Instead of the multi stages or tapering which ends up with loss accumulation and size-growth, the non-linear dispersive phases from the metamaterial CRLH(composite right and left-handed) properties are obtained by the accurate formulation and implemented by the short transmission line segments. Firstly, the CRLH dual-band two-way unequal power divider and equal power divider are separately designed. And then, the input of the two-way equal power divider is plugged in the output port of the unequal one, and the entire geometry is slightly adjusted for the desirable performance. The circuit analysis and full-wave simulation are used to predict the frequency responses and validated by the measurement of the prototype. Besides, the size-reduction effect is addressed.