• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.1
• /
• pp.12-17
• /
• 2018

This study describes the design and implementation of Antenna for Digital Satellite Communication. The Antenna unit for SHF band consists of Reflector, Septom Polarizer, Feed Horn and Support Frame etc. Thought analysis of space environment before production, the possibility of the malfunction of equipment minimized and we designed a reliable Antenna through simulation for vibration and thermal analysis generated during the launch, and compared pre-simulation of main performance results to test results about main performances of Antenna after production. After fabricating the antenna, the maximum gain of the antenna main beam is 36.5dBi, which satisfies the requirement of 35dBi or more, and it also satisfies the requirement of -20dB for return loss of less than -24dB. Also, the isolation of the transmission and reception of the antenna is -22.6dB or less, which satisfies the requirement of -20dB or less. The antenna for digital satellite communication described in this paper can be used in the satellite field of geostationary earth orbit and low earth orbit requiring high reliability in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6A
• /
• pp.667-667
• /
• 2004

We must design the buffer algorithm that protects traffic congestion and decreasing throughput at satellite communication network. It is important that buffer algorithm is satisfied with the good performance of transmission packet, responsibility of many connecting traffic and the QOS for connecting character. Old buffer algorithms are not the suitable algorithms when we have the satellite communication network environment. RED buffer algorithm is proposed by Floyd. It has a better performance than old buffer algorithm. But this algorithm is not well adapted a number of connecting TCP packet and changing network, so this algorithm has a bad performance on satellite communication network that is many of connecting user at same time. This paper propose the TARED(Target Adaptive RED). It has a good performance, adaptation and stability on satellite communication network and has not overflow and underflow of the buffer level.

• Journal of Communications and Networks
• /
• v.2 no.1
• /
• pp.76-84
• /
• 2000

Communication systems, including cell-based mobile communication systems, multiple satellite communication systems of multi-beam satellite systems, require reliable handoff methods between cell-to-cell, satellite-to-satellite of beam-to-team, respectively. Recent measurement of a CDMA cellular system indicates that the system is in handoff at about 35% to 70% of an average call period. Therefore, system reliability during handoff is one of the major system performance parameters and eventually becomes a factor in the overall system capacity. This paper presents novel and improved techniques for handoff in cellular communications, multi-beam and multi-satellite systems that require handoff during a session. this new handoff system combines the soft handoff mechanism currently implemented in the IS-95 CDMA with code and packet diversity combining techniques and an iterative decoding algorithm (Turbo Coding). the Turbo code introduced by Berrou et all. has been demonstrated its remarkable performance achieving the near Shannon channel capacity [1]. Recently. Turbo codes have been adapted as the coding scheme for the data transmission of the third generation international cellular communication standards : UTRA and CDMA 2000. Our proposed encoder and decoder schemes modified from the original Turbo code is suitable for the code and packet diversity combining techniques. this proposed system provides not only an unprecedented coding gain from the Turbo code and it iterative decoding, but also gain induced by the code and packet diversity combining technique which is similar to the hybrid Type II ARQ. We demonstrate performance improvements in AWGN channel and Rayleigh fading channel with perfect channel state information (CSI) through simulations for at low signal to noise ratio and analysis using exact upper bounding techniques for medium to high signal to noise ratio.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.211-218
• /
• 2007

Dual-polarization means to use two orthogonal polarizations, namely two independent channels in communication. This can be used to deal with high datarate caused by large amount of observed data in future LEO satellite. However, when two orthogonal polarizations are not perfectly independent to each other in practical, interference is probably raised in each channel, meaning that noise level in passband increases. XPD (Cross-Polarization Discrimination) is the ratio of the signal level at the output of a receiving antenna that is nominally co-polarized to the transmitting antenna to the output of a receiving antenna of the same gain but nominally orthogonal polarized to the transmitting antenna. In this paper, the influence of XPD on the communication between satellite and ground station was analyzed under the assumption that X-Band dual-polarization was applied to KOMPSAT-2 (KOrea Multi-Purpose SATellite-2). Through analysis, it was shown that more than 3dB of link margin was still achievable despite of worst axial ratio, 2.5dB, at ground station antenna when axial ratio of satellite antenna was about 0.5dB under 99% of environmental availability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.159-166
• /
• 2008

In this paper, we proposed an algorithm to solve the problem that can't maintain hop synchronization using only early-late gate tracking loop due to the drift of geo-stationary satellite in frequency hopping satellite communication system. When the signal is transferred to downlink through DRT(Dehop-Rebop Transponder), the problem with synchronization loss is occurred periodically when using only early-late gate tracking loop, because of energy loss in each side portion of hop due to orbital variation of the satellite. To solve this problem, we have developed Anti-Shrink synchronization tracking algorithm which uses the prediction value of transmission timing and the structure of inner-outer gate instead of early-late gate with the ranging information. Through simulations, we showed that the performance of the Anti-Shrink algorithm is better than that of simple inner-outer energy ratio algorithm and similar to that of conventional early-late tracking loop algorithm with ranging information. No synchronization failure in the proposed algorithm was occurred because of less energy loss and robustness without the ranging information.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2298-2306
• /
• 2014

In this paper, we propose an open loop power control algorithm to control transmission power of the On-The-Move(OTM) Satcom terminal in GEO satellite communication environment. The proposed algorithm identifies the current channel state restricted by an obstacle or an antenna depointing loss based on the received beacon signal strength. On the basis of the determined signal attenuation causes, the OTM Satcom terminal turns off the RF output when an antenna tracking is failed. If the OTM Satcom terminal experiences a channel blockage by an obstacle, the terminal spreads the transmit data to increase data reception probability. To evaluate the performance of the proposed algorithm, we compare an adjacent satellite interference level and an outage probability. The results show the performance of the proposed algorithm is better than that of the conventional algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8A
• /
• pp.1177-1185
• /
• 2000

In this paper, We report on the performance issues faced by TCP based applications on satellite link having long propagation delay and high probability of bit erros and propose ENA(Error Notification Ack) algorithm for TCP Performance Enhancement. TCP Protocol cannot distinguish errored segments(in noisy medium) from losses of genuine network congestion and react as if there is network congestion. Therefore, Slow Start and Congestion avoidance mechanism are initiated. It happen this case in satellite link. Therefore it reduce the transmission rate and drop the performance. So, in this paper We propose ENA algorithm which is distinguished errored segments from losses of network congestion. And We propose the method of algorithm's implementation. And We evaluate the Performance of Tahoe, Reno, Sack TCP with ENA. As results, TCP Performance is better.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.2980-2993
• /
• 2000

In order to achieve the rapid deployment of services. B-ISON network is being combined with terrestrial ATM and satellite network. Cell delay variation (CDV) generated by the difference of transfer mode between TOMA and ATM deteriorates transmission quality of the network system. We proposed the Partial Timestamps algorithm to supplement the problems of existing COV compensation methods. To minimize CDV and to utilize the satellite channels efficiently. only the optimized timestamps of a few cells within a control unit time of TDMA are selected and transmitted to the receiving earth station. The COV compensating efficiency of Partial Timestamps is evaluated by simulation. It is confirmed that CDV compensation capability of the proposed mechanism is superior to the other methods.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.12-19
• /
• 2011

Drawing on its extensive experience with natural disasters, Japan has been dispatching Japan Disaster Relief (JDR) team to disaster-stricken countries to provide specialist assistance in rescue and medical operations. The JDR team has assisted in the wake of disasters including the 2004 Indian Ocean Earthquake and the 2008 Sichuan Earthquake in China. Information about the affected area is essential for a rapid disaster response. However, it can be difficult to gather information on damages in the immediate post-disaster period. To help overcome this problem, we have built on an Earthquake Damage Estimation System. This system makes it possible to produce distributions of the earthquake's seismic intensity and structural damage based on pre-calculated data such as landform and site amplification factors for Peak Ground Velocity, which are estimated from a Digital Elevation Model, as well as population distribution. The estimation result can be shared with the JDR team and with other international organizations through communications satellite or the Internet, enabling more effective rapid relief operations.

• Journal of Satellite, Information and Communications
• /
• v.10 no.4
• /
• pp.46-51
• /
• 2015

In this paper, I design a linear array antenna simulator for anti-jamming GPS systems and perform various performance analysis by simulation. First, I generate simulated transmission signals through the analysis of GPS satellite signal structure, and analyze SNR(Signal to Noise power Ratio) performance of linear array antenna according to number of arrays under noise environments. In addition, I analyze the performance of the anti-jamming beam pattern using MMSE(Minimum Mean Square Error) signal processing method, and also analyze the anti-jamming performance considering antenna calibration problem when there are different delays between arrays.