• 제목/요약/키워드: satellite payload

검색결과 409건 처리시간 0.027초

정지궤도위성 통신탑재체 접속설계 (COMMUNICATION PAYLOAD INTERFACE DESIGN OF GEO SATELLITE)

  • 최재동;구자춘;박종석;양군호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.193-194
    • /
    • 2008
  • This paper defines the electrical interfaces and limited items to integrate Ka-band communication payload on the satellite system, which includes the detailed interfaces such as bus voltage and data bus according to the related COMS requirements. And the BUS Electrical Interface Simulator introduces to use during the course of validating and accepting between the KA-Band payload and their EGSE. These interface design results are fully validated through the testing with the BEIS and is compliant with the satellite interface control interface requirements.

  • PDF

통신해양기상위성 통신탑재체 데이터 접속 적합성 분석 (Data Bus Compatibility Analysis of COMS Communication Payload)

  • 최재동;조영호;김의찬
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 제40회 하계학술대회
    • /
    • pp.1013_1014
    • /
    • 2009
  • In this paper, the electrical interfaces used in between COMS satellite bus and Ka-band communication payload are analyzed to verify the robustness of data bus. The purpose of the serial data bus of satellite is to allow serial data transfer between one bus controller or source equipment to several user terminals or slave equipments. A serial data bus in COMS satellite is mainly used for Channel Amplifier and Digital Control Unit of Ka-band Payload.

  • PDF

고신뢰성 지상시험지원장비 조기 확보를 위한 시나리오 기반 위성 탑재체 패킷 분석방법 (Scenario Based Operating Satellite Payload Data Analysis Method to Secure Highly Reliable EGSE Early)

  • 이종태;이기준
    • 대한원격탐사학회지
    • /
    • 제33권5_1호
    • /
    • pp.521-535
    • /
    • 2017
  • 탑재체를 포함한 위성은 발사 이후 문제 발생시 조치할 수 있는 방법이 한정적이므로, 지상시험지원장비를 이용하여 그 기능을 충분히 검증하여야 한다. 또한 위성의 개발기간이 단축되고 있는 추세와 지상시험지원장비의 개발 완료시점이 전장품 엔지니어링 모델 개발완료보다 앞서야 한다는 점을 고려하면, 지상시험지원장비의 조기 확보는 위성 전체의 개발일정 준수를 위해서 반드시 필요하다고 할 수 있다. 본 논문에서는 지상시험지원장비의 일부인 탑재체 패킷 분석장치를 기능별 모듈화와 외부 파라메터화를 통해 시나리오 기반으로 동작할 수 있게 고안하여 고신뢰도의 지상시험지원장비 조기 확보방안을 제시하고, 구현한 장비를 실재 위성 개발사업에 적용한 결과를 보여준다.

INTRODUCTION OF COMS SYSTEM

  • Baek, Myung-Jin;Han, Cho-Young
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
    • /
    • pp.56-59
    • /
    • 2006
  • In this paper, Korea's first geostationary Communication, Ocean and Meteorological Satellte(COMS) program is introduced. COMS program is one of the Korea National Space Programs to develop and operate a pure civilian satellite of practical-use for the compound missions of meteorological observation and ocean monitoring, and space test of experimentally developed communication payload on the geostationary orbit. The target launch of COMS is scheduled at the end of 2008. COMS program is international cooperation program between KARI and ASTRIUM SAS and funded by Korean Government. COMS satellite is a hybrid satellite in the geostationary orbit, which accommodates multiple payloads of MI(Meteorological Imager), GOCI(Geostationary Ocean Color Imager), and the Ka band Satellite Communication Payload into a single spacecraft platform. The MI mission is to continuously extract meteorological products with high resolution and multi-spectral imager, to detect special weather such as storm, flood, yellow sand, and to extract data on long-term change of sea surface temperature and cloud. The GOCI mission aims at monitoring of marine environments around Korean peninsula, production of fishery information (Chlorophyll, etc.), and monitoring of long-term/short-term change of marine ecosystem. The goals of the Ka band satellite communication mission are to in-orbit verify the performances of advanced communication technologies and to experiment wide-band multi-media communication service mandatory.

  • PDF

해석해를 이용한 발사시 위성체 열해석

  • 최준민;김희경;현범석
    • 항공우주기술
    • /
    • 제2권2호
    • /
    • pp.83-88
    • /
    • 2003
  • 발사시 fairing jettison-separation의 과정에서 발사체에 탑재된 위성체가 우주환경에 노출이 되어 태양광, 지구복사, Albedo, free molecular heating 등의 여러 가지 열환경의 직접적인 영향을 받게 된다. 이 때, 위성체 중에서 발사체의 진행 방향으로 최외각에 위치한 payload box가 worst hot condition의 조건을 만족하며 가열되게 된다. Payload box를 하나의 질량으로 가정하고 적용되는 여러 가지 열환경을 고려하여 온도지배방정식을 정리하면 해석해가 존재하는 1차원 미분 방정식을 유도할 수 있다. 이 식으로부터 구한 해석해를 worst hot condition을 만족하는 payload box에 적용하여 발사시 가열에 의한 온도 상승 정도를 예측하고, 그 결과로부터 위성체의 열적 안정성을 비교적 간단한 방법으로 검증할 수 있다.

  • PDF

엔지니어링 모델 Ka 대역 위성통신 탑재체 구현 및 시험 (Engineering Model Ka-band Satellite Communications Payload Implementation and Test)

  • 박종흥;신동환;정병현;이재현;이성팔
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
    • /
    • pp.389-392
    • /
    • 2000
  • Electronics and Telecommunications Research Institute (ETRI) developed the Ka-band satellite communications payload. This system is able to provide a high data rate communication service with a bandwidth of 200 MHz, a wideband digital flunking services up to 155 Mbps and asymmetrical internet multimedia service. The system employs the common receive/transmit antenna and the 2-for-1 redundant scheme for the LNA-Downconverters. The different types of high power amplification, TWTA for one chain and SSPA for the other chain, are used lot the variety of experimental options. For the reliable test of the payload, EGSE was also developed. The parametric RF tests were carried out in order to measure the performance of Ka-band communication subsystem, in most case the results of RF performance test complied the payload requirement.

  • PDF

도시환경에서 적응전력제어를 이용한 이동국 속도추정 (Mobile Target Speed Estimation in Urban Environments with Adaptive Power Control)

  • 이현철;이종태;유상범;강은수
    • 한국위성정보통신학회논문지
    • /
    • 제11권1호
    • /
    • pp.46-50
    • /
    • 2016
  • The adaptive power control of Code Division Multiple Access (CDMA) systems for communications between User Equipments (UEs) with a link-budget based Signal-to-Interference Ratio (SIR) estimate which has distance information is applied to three inner loop power control algorithms. The speed estimation performances of these algorithms with their consecutive Transmit-Power-Control (TPC) ratios are compared to each other, and it is concluded that the speed can be estimated using the TPC ratio information of Consecutive TPC Ratio Step-size Closed Loop Power Control (CS-CLPC) and Fixed Step-size Power Control (FSPC).

초소형위성 SAR 탑재체 운용모드 설계 및 성능분석 (Operation Mode Design and Performance Analysis for Small Satellite SAR Payload)

  • 박종민;김동식;김완식;김종필
    • 한국인터넷방송통신학회논문지
    • /
    • 제19권5호
    • /
    • pp.169-173
    • /
    • 2019
  • 본 논문에서는 SAR 탑재체의 운용모드 설계방안 및 설계결과 그리고 주요성능에 대한 분석 결과를 제시하였다. SAR 시스템 설계는 요구사항을 만족하는 주요변수의 설계값 도출로 진행된다. 저궤도에서 운용하는 100kg 미만의 초소형위성을 가정하고 고해상의 영상을 위하여 X-대역의 주파수를 선정하였다. 주어진 설계 요구사항을 반영하여 주파수 대역폭, 관측영역 설계, 안테나 설계를 진행하고, 설계결과를 반영하여 목표 영상품질인 NESZ 만족여부를 확인하였다. 또한 설계값을 반영하여 관측영역별로 최적의 PRF를 설계하였다. 또한 소형, 경량화를 위한 안테나 형태를 제안하였다. 또한 설계된 변수를 적용하여 체계성능을 확인하였다.

Ka 대역 통신위성중계기용 저잡음증폭기 모듈 개발 (Development of LNA module for Ka-band Communication Satellite Payload)

  • 장동필;정진철;염인복;박종흥;오승엽
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
    • /
    • pp.189-192
    • /
    • 2004
  • A LNA module, integrated microwave assemblies (IMAs) were developed for use in Ka-band Satellite Communication Satellite Payload that operates in the frequency range of 29,6 ${\~}$ 30.0GHz. The module will be placed directly behind their respective antenna feed horns to minimize the required waveguide and system noise figure impact. Two MMIC LNA Chips were used in the module design. The measured result shows that the module has 32dB gain and 2.4dB NF performance. The module size is 51m ${\times}$ 36m ${\times}$ 22 and the mass is 92g. The Noise Figure performance is the best result of currently available modules for satellite payload operating in the same frequency range. The module will be assembled using space-qualified process and tested for space qualification.

  • PDF

통신방송위성 중계기용 Ku-대역 채널증폭기 시험 모델 설계 (Design of Ku-band Channel Amplifier Engineering Model for Communication and Broadcasting Satellite Payload)

  • 장병준;염인복;이성팔
    • 한국전자파학회논문지
    • /
    • 제13권10호
    • /
    • pp.982-988
    • /
    • 2002
  • 본 논문은 통신방송위성 중계기용 Ku-대역 채널증폭기 시험모델의 설계와 제작과정을 요약하였다. 채널증폭기의 구조는 고정이득제어 모드에서는 전압제어형 감쇄기를 이용한 아날로그 이득 조절 방식을 사용하였으며 자동레벨조절 모드에서는 루프제어방식을 이용한 출력레벨 제한회로를 사용하였다. 설계된 채널증폭기는 전압제어형 PEN-다이오드 감쇄기와 온도보상회로 등의 최신 기술 등을 이용하였다. 측정된 특성은 설계치와 동일하게 28 dB의 이득조절 및 16 dB의 자동이득조절 범위를 갖는 것을 확인하였다. 설계된 시험모델은 인증을 거치면 Ku-대역 통신방송 위성중계기용 채널증폭기로 사용되어질 수 있다.