• Journal of Advanced Navigation Technology
• /
• v.13 no.2
• /
• pp.178-186
• /
• 2009

SBAS(Satellite Based Augmentation System) provides GNSS satellite orbit and clock corrections for positioning accuracy improvement of GNSS users. In this paper, the accuracy of SBAS satellite orbit and clock corrections were analyzed by comparing with the IGS(International GNSS Service) precise ephemeris. The GPS antenna phase center offsets and the P1-C1 bias are considered for the analysis. The correction data of the US WAAS and the Japanese MSAS were analyzed. The analysis results showed that the SBAS satellite orbit and clock corrections are highly correlated. The correction data accuracy depends on the SBAS ground network size and orbit trajectories.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.1
• /
• pp.73-79
• /
• 2016

The characteristics of the SBAS satellite orbit and clock corrections are highly affected by the narrow network size in the Korean peninsula, which is expected to have an important role in the future dual frequency SBAS. The correlation between satellite corrections can be analyzed in terms of the spatial decorrelation effect which should be analyzed to keep the service area as wide as possible. In this paper, the characteristics of satellite error corrections for the potential Korean dual frequency SBAS were analyzed, and an optimal filter design approach is proposed to maximize the service area.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.3
• /
• pp.215-228
• /
• 2023

The State Space Representation (SSR) method provides individual corrections for each Global Navigation Satellite System (GNSS) error components. This method can lead to less bandwidth for transmission and allows selective use of each correction. Precise Point Positioning (PPP) - Real-Time Kinematic (RTK) is one of the carrier-based precise positioning techniques using SSR correction. This technique enables high-precision positioning with a fast convergence time by providing atmospheric correction as well as satellite orbit and clock correction. Currently, the positioning service that supports PPP-RTK technology is the Quazi-Zenith Satellite System Centimeter Level Augmentation System (QZSS CLAS) in Japan. A system that provides correction for each GNSS error component, such as QZSS CLAS, requires monitoring of each error component to provide reliable correction and integrity information to the user. In this study, we conducted an analysis of the performance of residual error bounding for each error component. To assess this performance, we utilized the correction and quality indicators provided by QZSS CLAS. Performance analyses included the range domain, dispersive part, non-dispersive part, and satellite orbit/clock part. The residual root mean square (RMS) of CLAS correction for the range domain approximated 0.0369 m, and the residual RMS for both dispersive and non-dispersive components is around 0.0363 m. It has also been confirmed that the residual errors are properly bounded by the integrity parameters. However, the satellite orbit and clock part have a larger residual of about 0.6508 m, and it was confirmed that this residual was not bounded by the integrity parameters. Users who rely solely on satellite orbit and clock correction, particularly maritime users, thus should exercise caution when utilizing QZSS CLAS.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.2
• /
• pp.75-82
• /
• 2021

Fields of high-precision positioning applications are growing fast across the mass market worldwide. Accordingly, the industry is focusing on developing methods of applying State-Space Representation (SSR) corrections on low-cost GNSS receivers. Among SSR correction types, this paper analyzes Safe Position Augmentation for Real Time Navigation (SPARTN) messages being offered by the SAfe and Precise CORrection DAta (SAPCORDA) company and validates positioning algorithms based on them. The first part of this paper introduces the SPARTN format in detail. Then, procedures on how to apply Basic-Precision Atmosphere Correction (BPAC) and High-Precision Atmosphere Correction (HPAC) messages are described. BPAC and HPAC messages are used for correcting satellite clock errors, satellite orbit errors, satellite signal biases and also ionospheric and tropospheric delays. Accuracies of positioning algorithms utilizing SPARTN messages were validated with two types of positioning strategies: Code-PPP using GPS pseudorange measurements and PPP-RTK including carrier phase measurements. In these performance checkups, only single-frequency measurements have been used and integer ambiguities were estimated as float numbers instead of fixed integers. The result shows that, with BPAC and HPAC corrections, the horizontal accuracy is 46% and 63% higher, respectively, compared to that obtained without application of SPARTN corrections. Also, the average horizontal and vertical RMSE values with HPAC are 17 cm and 27 cm, respectively.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.251-261
• /
• 2022

The Centimeter Level Augmentation Service (CLAS) is the Precise Point Positioning (PPP) - Real Time Kinematic (RTK) correction service utilizing the Quasi-Zenith Satellite System (QZSS) L6 (1278.65 MHz) signal to broadcast the Global Navigation Satellite System (GNSS) error corrections. Compact State-Space Representation (CSSR) corrections for mitigating GNSS measurement error sources such as satellite orbit, clock, code and phase biases, tropospheric error, ionospheric error are estimated from the ground segment of QZSS CLAS using the code and carrier-phase measurements collected in the Japan's GNSS Earth Observation Network (GEONET). Since the CLAS service begun on November 1, 2018, users with dedicated receivers can perform cm-level precise positioning using CSSR corrections. In this paper, CLAS-based VRS-RTK performance evaluation was performed using Global Positioning System (GPS) observables collected from the refence station, TSK2, located in Japan. As a result of performing GPS-only RTK positioning using the open-source software CLASLIB and RTKLIB, it took about 15 minutes to resolve the carrier-phase ambiguities, and the RTK fix rate was only about 41%. Also, the Root Mean Squares (RMS) values of position errors (fixed only) are about 4cm horizontally and 7 cm vertically.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.3
• /
• pp.159-168
• /
• 2021

Precise Point Positioning-Real Time Kinematic (PPP-RTK) is an improved PPP method that provides the user receiver with satellite code and phase bias correction information in addition to the satellite orbit and clock, thus enabling single-receiver ambiguity resolution. Single station PPP-RTK concept is special case of PPP-RTK in that corrections are computed, instead of a network, by only one single GNSS receiver. This study is performed to experimentally verify the positioning accuracy performance of single baseline RTK level by a user who utilizes correction for a single station PPP-RTK using dual frequencies. As an experimental result, the horizontal and vertical 95% accuracy was 2.2 cm, 4.4 cm, respectively, which verify the same performance as the single baseline RTK.

• Journal of Advanced Navigation Technology
• /
• v.20 no.5
• /
• pp.425-432
• /
• 2016

When user estimates user's position, GPS positions can be obtained from the navigation message transmitted from the GPS. However, the broadcast ephemeris cannot be used in the applications required high-level accuracies because it can cause errors of several meters. To correct satellite positions and clocks, user can use RTS corrections provided by IGS. In this paper, the accuracy of broadcast and RTS corrections are analyzed by comparing with the IGS final for 3-months. The RTS errors are analyzed for each user's locations and satellite blocks. The correlations between errors and shadow condition, and solar and geomagnetic activities are analyzed. The latency is applied to the RTS corrections, and these are extrapolated by polynomial. Then, the extrapolated RTS are compared with true RTS. The single-day performances of the PPP by broadcast ephemeris and RTS corrected ephemeris are analyzed. As a result, RTS 3D orbit and clock errors are 1/20 and 1/3 less than broadcast ephemeris errors. 3D positioning error of the RTS is 1/5 less than that of broadcast ephemeris.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.269-277
• /
• 2022

In this paper, we overview the system development status of the national maritime precise point positioning-real-time kinematic (PPP-RTK) service in Korea, also known as the Precise POsitioning and INTegrity monitoring (POINT) system. The development of the POINT service began in 2020, and the open service is scheduled to start in 2025. The architecture of the POINT system is composed of three provider-side facilities-a reference station, monitoring station, and central control station-and one user-side receiver platform. Here, we propose the detailed functionality of each component considering unidirectional broadcasting of augmentation data. To meet the centimeter-level user positioning accuracy in maritime coverage, new reference stations were installed. Each reference station operates with a dual receiver and dual antenna to reduce the risk of malfunctioning, which can deteriorate the availability of the POINT service. The initial experimental results of a testbed from corrections generated from the testbed network, including newly installed reference stations, are presented. The results show that the horizontal and vertical accuracies satisfy 2.63 cm and 5.77 cm, respectively. For the purpose of (near) real-time broadcasting of POINT correction data, we designed a correction message format including satellite orbit, satellite clock, satellite signal bias, ionospheric delay, tropospheric delay, and coordinate transformation parameters. The (near) real-time experimental setup utilizing (near) real-time processing of testbed network data and the designed message format are proposed for future testing and verification of the system.

• Journal of Advanced Navigation Technology
• /
• v.23 no.3
• /
• pp.237-244
• /
• 2019

Since SBAS provides users with GNSS orbit, clock, and ionospheric corrections and integrity, the more precise positioning is possible. As the SBAS service area is expanded due to the development of the SBAS and the installation of the additional ground stations, there is a region where two or more SBAS messages can be received. However, the research on multi-constellation SBAS selection method has not carried out. In this study, we compared the result of positioning accuracy after applying the SBAS correction selected by using WAAS priority, EGNOS priority, or error covariance comparison method to LEO satellites in the regions where WAAS and EGNOS signals are transmitted simultaneously. When using WAAS priority method, 3D orbit error is smallest at 2.57 m. The covariance comparison method is outperform at the center of the overlap region far from each WAAS and EGNOS stations. In the eastern region near the EGNOS stations, the 3D orbit errors using EGNOS priority method is 8% smaller than the errors using the WAAS priority method.