• The Journal of Advanced Prosthodontics
• /
• 제12권2호
• /
• pp.75-82
• /
• 2020

PURPOSE. The aim of this study was to investigate the shear bond strength of luting cements used with implant retained restorations on to titanium specimens after different surface treatments. MATERIALS AND METHODS. One hundred twenty disc shaped specimens were used. They were divided into three groups considering the surface treatments (no treatment, sandblasting, and oxygen plasma treatment). Water contact angle of specimens were determined. The specimens were further divided into four subgroups (n=10) according to applied cement types: polycarboxylate cement (Adhesor Carbofine-AC), temporary zinc oxide free cement (Temporary CementZOC), non eugenol provisional cement for implant retained prosthesis (Premier Implant Cement-PI), and non eugenol acrylic-urethane polymer based provisional cement for implant luting (Cem Implant Cement-CI). Shear bond strength values were evaluated. Two-way ANOVA test and Regression analysis were used to statistical analyze the results. RESULTS. Overall shear bond strength values of luting cements defined in sandblasting groups were considerably higher than other surfaces (P<.05). The cements can be ranked as AC > CI > PI > ZOC according to shear bond strength values for all surface treatment groups (P<.05). Water contact angles of surface treatments (control, sandblasting, and plasma treatment group) were 76.17° ± 3.99, 110.45° ± 1.41, and 73.80° ± 4.79, respectively. Regression analysis revealed that correlation between the contact angle of different surfaces and shear bond strength was not strong (P>.05). CONCLUSION. The retentive strength findings of all luting cements were higher in sandblasting and oxygen plasma groups than in control groups. Oxygen plasma treatment can improve the adhesion ability of titanium surfaces without any mechanical damage to titanium structure.

• The Journal of Advanced Prosthodontics
• /
• 제13권4호
• /
• pp.237-245
• /
• 2021

PURPOSE. This study aimed to compare the microshear bond strength (µSBS) of dual-cure resin cement in CAD-CAM zirconia after different cleaning techniques. MATERIALS AND METHODS. Fifty discs of zirconia-based ceramic from Ivoclar Vivadent were embedded in acrylic resin. The discs were divided into five groups according to the cleaning methods used: Group 1: drying with spraying + sandblasting with Al₂O₃; Group 2: washed with water and dried with spraying + sandblasting with Al₂O₃;Group 3: washed with distilled water and dried with spraying + sandblasting with Al₂O₃ + zirconium oxide (Ivoclean); Group 4: washed with distilled water and dried with spraying + sandblasting with Al₂O₃ + potassium hydroxide (Zirclean); and Group 5: washed with distilled water and dried with spraying + sandblasting with Al₂O₃ + 1% NaClO. All of the groups were contaminated with artificial saliva for 1 minute and then cleaned. Statistical analyses were performed using ANOVA and Tukey's tests. RESULTS. There were statistically significant differences among all groups for µSBS (P < .05). The group treated with zirconium oxide (Group 3) showed the highest µSBS (18.75 ± 0.23 MPa). CONCLUSION. When applied to zirconia, the cleaning methods affected the bonding with resin cement differently.

• 대한치과교정학회지
• /
• 제28권5호
• /
• pp.803-812
• /
• 1998

도재의 표면처리가 세라믹 브라켓의 전단 접착강도에 미치는 영향과 브라켓 탈락 양상을 알아보기 위해 60개의 ceradent 도재 시편을 glazing 후 군당 10개씩 여섯 군으로 다음과 같이 분류하였다: 1군(silane), 2군(etching+silane), 3군(stone+silane), 4군(sandblasting+silane), 5군(stone+etching+silane), 6군(sandblasting+etching+silane) 통상적인 방법으로 세라믹 브라켓을 접착한 후 전단 접착강도를 측정하고 탈락양상을 육안 및 주사전자현미경으로 관찰하여 다음과 같주 결론을 얻었다. 1. 표면처리 후 silane을 도포한 2군부터 6군은 silane만을 도포한 1군에 비해 유의성 있는 전단 접착강도의 증가를 보였다(P<0.05). 2. 한 가지 방법 이상으로 표면처리한 3군부터 6군은 서로 유의한 차이를 보이지 않았다(P>0.05). 3. etching 표면 처리한 2군은 sandblasting 표면 처리한 4군과 복합 표면 처리한 5,6 군에 비해 전단 접착 강도가 낮았다. (p<0.05) 4. sandblasting 표면 처리한 4군은 주사 전자 현미경 소견상 복합 처리한 5,6군보다 감소된 요철 정도를 보였으나 전단접착 강도 측정 결과 유의한 차이를 보이지 않았다. (p>0.05) 이상의 결론을 종합해볼 때 도재에 세라믹 브라켓을 접착하기 위해서는 한가지 이상의 방법에 의한 도재의 표면처리 후 silane을 도포해야 임상적으로 적절한 접착강도를 얻을 수 있으며, 술식의 간편성을 고려할 때 sandblasting 후 silane 처리를 하는 것이 효율적일 것으로 사료된다.

• 대한치과보철학회지
• /
• 제38권3호
• /
• pp.328-335
• /
• 2000

Statement of the problem. Recently an innovative method of fabricating indirect restorations by gold electroforming has been developed. But the bond quality and strength of the gold coping to the porcelain is uncertain. Purpose of study. The purpose of this study is to analyze and evaluate the electroformed gold surface for mechanical bonding between the gold and the ceramic veneering. Methods/material. Electroformed disks were made using electroforming technique. And the surface of the electroformed coping was analyzed after sandblasting, heat-treatment, bonding agent application, opaque porcelain firing with scanning electron microscopy and energy dispersive x-ray analysis. Results. In the analysis with SEM, Sandblasting made the sharp edges and undercuts on the electroformed surface, and after bonding agent application, net-like structure were created on the electroformed surface. In the energy dispersive x-ray analysis it is confirmed that electroformed surface contains some impurities. Conclusion. With the use of sandblasting and bonding agent, electroformed surface seems to be enough to bond with veneering porcelain.

• 대한치과보철학회지
• /
• 제29권2호
• /
• pp.17-22
• /
• 1991

The purpose of this study was to evaluate the tensile bond strengths of treated alloy surfaces for resin bonded retainers. For the experiment metal surfaces of 5 alloys were teated with sandblasting, Silicoating Rocatec, and cemented with Visio-Gem. All specimens divided into two groups. The group I specimens were treated with 24-hour immersion in $37^{\circ}C$ distilled water, and group II specimens were teated with 1500 thermo-cycles from $5^{\circ}C\;to\;55^{\circ}C$. The obtained results were as follows: 1. Bond strength values showed significantly different between sandblasting group and other groups after a 24-hour immersion in $37^{\circ}C$ distilled water(P<0.05). 2. All samples were fractured during thermo-cycles for sandblasting group, and bond strength values for Silicoating and Rocatec groups showed significantly different after 1500 thermo-cycles from $5^{\circ}C\;to\;55^{\circ}C$.

• 대한치과보철학회지
• /
• 제38권5호
• /
• pp.704-723
• /
• 2000

This study was undertaken to evaluate the tensile bond strength of In-Ceram alumina core treat-ed by ion assisted reaction(IAR). Ion assisted reaction is a prospective surface modification technique without damage by a keV low energy ion beam irradiation in reactive gas environments or reactive ion itself. 120 In-Ceram specimens were fabricated according to manufacturer's directions and divided into six groups by surface treatment methods of In-Ceram alumina core. SD group(control group): sandblasting SL group: sandblasting + silane treatment SC group: sandblasting + Siloc treatment IAR I group: sandblasting + Ion assisted reaction with argon ion and oxygen gas IAR II group: sandblasting + Ion assisted reaction with oxygen ion and oxygen gas IAR III group: sandblasting + Ion assisted reaction with oxygen ion only For measuring of tensile bond strength, pairs of specimens within a group were bonded with Panavia 21 resin cement using special device secured that the film thickness was $80{\mu}m$. The results of tensile strength were statistically analyzed with the SPSS release version 8.0 programs. Physical change like surface roughness of In-Ceram alumina core treated by ion assistad reaction was evaluated by Contact Angle Measurement, Scanning Electron Microscopy, Atomic Force Microscopy; chemical surface change was evaluated by X-ray Photoelectron Spectroscopy. The results as follows: 1. In tensile bond strength, there were no statistically significant differences with SC group, IAR groups and SL group except control group(P<0.05). 2. Contact angle measurement showed that wettability of In-Ceram alumina core was enhanced after IAR treatment. 3. SEM and AFM showed that surface roughness of In-Ceram alumina core was not changed after IAR treatment. 4. XPS showed that IAR treatment of In-Ceram alumina core was enabled to create a new functional layer. A keV IAR treatment of In-Ceram alumina core could enhanced tensile bond strength with resin cement. In the future, this ion assisted reaction may be used effectively in various dental materials as well as in In-Ceram to promote the bond strength to natural tooth structure.

• 대한치과교정학회지
• /
• 제28권5호
• /
• pp.681-688
• /
• 1998

본 연구는 브라켓 간접부착술식시 레진 베이스의 표면처리에 따른 전단결합강도와 파절양상을 비교함으로써 레진 베이스 표면처리의 효과를 평가해 보기 위하여 시행되었다. 소의 하악 중절치를 포매하여 만든 90개 시편의 석고 모형에 광중합형 레진 접착제를 이용하여 금속 브라켓을 위치시킨 후 대조군은 표면처리하지 않은 반면 실험군은 레진 베이스를 Plastic Conditioner와 sandblasting으로 각각 표면 처리하여 시편에 옮겨 부착한 다음 만능물성 시험기를 이용하여 전단결합강도를 측정하고,파절양상을 관찰하여 다음과 같은 결과를 얻었다. 1. 레진 베이스를 표면처리하지 않은 경우에 비하여 Plastic Conditioner와 sandblasting으로 각각 처리한 경우 평균 전단결합강도가 높게 나타났으며 통계적으로 유의한 차이를 보였다. 2. Plastic Conditioner로 처리한 군과 sandblasting으로 처리한 군 간의 전단결합강도는 통계적 유의차를 보이지 않았다. 3. 각 군의 파절양상을 접착제 잔류지수를 통하여 비교 관찰한 결과 세 군 간에 통계적 유의차를 보이지 않았다. 4. 전단결합강도와 접착제 잔류지수 간의 상관검정 결과 전단결합강도가 높은 경우 레진 베이스와 브라켓 경계부에서의 파절이 빈번한 경향을 보였으나 그 통계적 유의성은 보이지 않았다. 이상의 실험결과는 브라켓 간접부착술식에서 결합강도 증가를 위하여 레진 베이스의 표면처리가 필요함을 시사하였다.

• 대한치과교정학회지
• /
• 제36권5호
• /
• pp.331-338
• /
• 2006

본 연구는 폴리카보네이트 브라켓 부착 시 표면처리가 결합강도를 증진시키는지 알아보고자 시행되었다. 소의 하악 중절치를 포매하여 만든 100개의 시편에 광중합형 레진 접착제를 이용하여 폴리카보네이트 브라켓(Alice, 광명 데이콤, 대한민국)을 부착하였다. 대조군의 경우, 표면처리 없이 부착한 반면, 실험군의 경우 샌드블라스팅 처리한 경우, plastic conditioner 처리하여 부착한 경우, 그리고 샌드블라스팅과 함께 plastic conditioner 처리한 경우로 구분하여 접착하였다. 만능시험기를 이용하여 전단결합강도를 측정하고 파절양상을 비교 분석한 결과, plastic conditioner나 샌드블라스팅으로 표면처리를 시행한 경우 표면처리를 시행하지 않은 경우에 비해 높은 결합강도를 보였다 (p < 0.001). 샌드블라스팅과 plastic conditioner를 모두 처리한 경우는 샌드블라스팅만이나 Plastic conditioner만 처리한 경우보다 높은 결합강도를 보였으며, 특히 샌드블라스팅만 처리한 경우에 비해서는 통계적 유의차를 보였다 (p < 0.05). 이상의 연구결과는 폴리카보네이트 브라켓 부착 시 결합강도 증진을 위해서 베이스의 표면처리가 필요하며 샌드블라스팅 후 plastic conditioner 도포가 가장 효과적임을 보여주었다.

• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.426-437
• /
• 2005

Statement of problem : Although zirconium oxide ceramics are more and more commonly used in restorative dentistry, for many clinical applications only limited data can be found in the literature. However it is quite clear that hydrofluoric acid etching is impossible with zirconia ceramics. Therefore, other bonding techniques are required in order to lute these materials adhesively. Purpose : The purpose or this study was to evaluate the effects of surface treatments on shear bond strengths between two resin cements and a zirconia ceramic. Materials and methods : Experimental industrially manufactured yttrium-oxide-partially-stabilized zirconia ceramic discs (Adens, Korea) were used for this study. The ceramic specimens divided into five experimental groups and a control group (as received). Five surface treatments were studied 1) sandblasting with 110$\mu$m $Al_2O_3$ at 3 bars pressure 13 seconds at a distance of 10 mm, 2) flame-treated with the Silano-Pen for 5 $s/cm^3$, 3) grinding with a diamond bur. 4) sandblasting + Silano-Pen treatment, 5) diamond bur preparation + Silano-Pen treatment. Acrylic plastic tube (5 mm in height and 3 mm in diameter) were filled with composite to fabricate composite cylinders The composite cylinders were bonded to the ceramic specimens with either Superbond C&B or Panavia F resin luting agents. All cemented specimens were tested under shear loading until fracture on universal testing machine at a crosshead speed 1mm/min; the maximum load at fracture was recorded. Sheat bond strength data were analyzed with oneway analysis of variance and Tukey HSD tests (P<.05). Treated ceramic surfaces and fracture surfaces after shear testing were examined morphologically using scanning electron microscope. Results: Ceramic surface treatment with Silano-Pen after sandblasting improved the bond strength of Superbond C&B resin cement. Supevbond C& B resin cement at Silano-Pen aiker sandblasting($27.4{\pm}3.8MPa$) showed statistically higher shear bond strength than the others. Conclusion: Within the limitation of this study, Superbond C& &B resin cement are suitable for cementation of zirconia ceramics and flame-treated with the Silano-Pen after sandblasting is required to enhance the bond strength.

• Restorative Dentistry and Endodontics
• /
• 제35권3호
• /
• pp.173-179
• /
• 2010

본 연구의 목적은 실란, 과산화수소, 불산, 샌드블라스팅을 이용한 섬유포스트의 표면 처리가 복합레진 코어와의 결합강도에 미치는 영향을 평가하기 위한 것이다. 32개의 FRC Postec Plus를 표면 처리를 하지 않은 대조군과 표면 처리 방법에 따라 7개의 실험군(S군, HP군, HP-S군, HF군, HF-S군, SB군, SB-S군)으로 분류하였다. S군은 실란을 적용하였고, HP군은 28%의 과산화수소로 부식하였으며, HP-S군은 과산화수소 처리 후 실란을 적용하였다. HF군은 4% 불화수소산 젤로 부식하였고, HF-S군은 불화수소산 젤 처리 후 실란으로 처리하였다. SB군은 산화 알루미늄으로 샌드블라스팅 하였고, SB-S군은 샌드블라스팅 후 실란을 적용하였다. 표면 처리한 포스트는 Tetric Flow를 사용하여 광중합 시키면서 주위에 원통형의 코어를 축조하였다. 형성된 포스트-코어 복합체를 막대 형태로 절단하여 미세인장결합강도를 측정하였다. One-way ANOVA와 LSD test로 결합강도 값을 분석한 결과, 샌드블라스팅은 섬유포스트와 복합레진 코어와의 결합력을 증가시켰으며 샌드블라스팅 후 실란으로 처리한 경우 다른 처리 방법들보다 유의하게 증가된 결합력을 나타냈다(p < 0.05).