• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.81-85
• /
• 2009

This study was to execute the basic property evaluation of recycled sand which produced by the sand flux device in order to evaluate the performance of differences between small large sand flux device. As a result, this study has found out that the recycled sand after passing the sand flux device had excellent quality characteristics compared with the One before passing the device. In additional experiment On the basic material properties, this study showed a tendency to improve the quality and performance significantly in case of fineness modulus, absolute surface dried density, 0.08mm sieve throughput, volume of clay lumps, and content of organic foreign matter. In conclusion, it was considered as various quality performances of recycled sand were improved through the production stage of prototype.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1358-1366
• /
• 2006

In order to study the effects of shell contents on the liquefaction resistance of the shelly sand, NGI cyclic simple shear tests were performed for the shelly sands with shell contents of 0%, 5%, 10%, 20% and 30% under the effective vertical stress of 50kPa, 100kPa and 150kPa for 40% and 55% of relative density, respectively. Cyclic simple shear test results showed that for the low effective vertical stress, liquefaction resistance increased rapidly with the increase of shell contents in both 40% and 55% relative density. On the other hand, for the high effective vertical stress, the liquefaction resistance increased slightly in 40% relative density whereas the resistance was almost same in 55% relative density. Liquefaction resistance decreased with increasing effective vertical stress for both 40% and 55% relative density. In the same effective vertical stress and shell contents, liquefaction resistance increased with the increase of relative density of sands.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.761-768
• /
• 2008

This paper presents the results of a laboratory study on the thermal conductivity of sand(silica, quartzite, limestone, sandstone, granite and masonry sand)-water mixtures used in ground heat exchanger backfilling materials. Nearly 260 tests were performed in a thermal conductivity measuring system to characterize the relationships between the thermal conductivity of mixtures and the water content. The experimental results show that the thermal conductivity of mixtures increases with increasing dry density and with increasing water content. The most widely used empirical prediction models for thermal conductivity of soils were found inappropriate to estimate the thermal conductivity of unsaturated sand-water mixtures. An improved model using a exponential relationship to compute the thermal conductivity of dry sands and empirical relationship to assess the normalized thermal conductivity of unsaturated sand-water mixtures is presented.

• 한국조경학회지
• /
• 제25권2호
• /
• pp.94-103
• /
• 1997

The purpose of this study is to find out the effects of brick paved under-surface soil physical properties which are changed by fixed trampling. Thus, a sandy loam which is known as a profitable soil for plants is used an experimental soil to study the changes of the soil physical properties. It is related to sand bed's thickness & particle size which are settled by experimental variable factors. According to the variation of sand bed's particle size, bulk density and soil hardness at natural dryed soilcondition result in 0.075~2.00mm>2.00~5.00mm>2.00~8.00mm>5.00~8.00mm, and water content at natural dryed soil condition are observed being insensible change rate from the point that sand thickness is 30~40mm and more sand bed's thickness constructed by the variation of sand bed's thickness.

• 한국지반공학회논문집
• /
• 제24권12호
• /
• pp.53-63
• /
• 2008

본 연구에서는 대형 챔버시험을 통해 결정된 고결모래의 콘선단저항과 고결모래의 횡방향구속 변형계수, 일축압축 강도, 전단강도와의 관계를 검토하였다. 시험결과 모래의 상대밀도나 연직구속압 뿐만 아니라 고결효과가 커질수록 콘선단저항과 횡방향구속 변형계수가 증가하였다. 모래의 횡방향구속 변형계수는 상대밀도나 연직구속압보다 고결의 영향이 더 크게 작용하며, 반면 콘선단저항은 변형계수보다 상대밀도나 연직구속압의 영향이 더 크게 나타났다. 고결결합 미파괴 상태로 간주될 수 있는 일축압축강도, 전단강도, 횡방향구속 변형계수와는 달리 콘선단저항은 고결결합을 파괴하며 측정되기 때문에, 고결모래의 변형계수를 $70{\sim}85%$ 정도 과소평가하였다. 또한 본 연구에서는 회귀분석을 통해 고결모래의 콘선단저항과 전단강도의 관계, 콘선단저항과 일축압축강도의 관계, 그리고 횡방향구속 변형계수와 콘선단저항, 일축압축강도의 관계가 표현되었다.

• 한국지반환경공학회 논문집
• /
• 제8권6호
• /
• pp.69-76
• /
• 2007

해안 연약지반 개량공사에 사용되는 모래는 대부분 다소간의 패각을 함유하게 된다. 본 연구에서는 패각 함유량이 패각질모래의 액상화 저항에 미치는 영향을 연구하기 위하여 중량비에 의해 0%, 5%, 10%, 20%, 30%의 패각을 함유한 모래의 입도를 조성하고 건조퇴적 방법으로 상대밀도가 40%와 55%인 공시체를 성형하여 50kPa, 100kPa, 150kPa의 압밀유효연직응력으로 NGI형 직접단순전단시험기를 이용해서 반복단순전단시험을 수행하였다. 연구 결과, 압밀유효연직응력이 낮을 경우에는 상대밀도가 40%, 55% 모두 패각 함유량이 많아질수록 액상화강도가 크게 증가하는 경향을 보였다. 그러나 압밀유효연직응력이 높을 경우에는 상대 밀도가 40%일 경우 약간 증가하는 경향을 얻었으나 상대밀도가 55%일 경우에는 거의 일정한 값으로 수렴하는 결과를 얻었다. 그리고 상대밀도에 관계없이 압밀유효연직응력이 증가하면 액상화 저항이 감소하는 경향을 보였다. 또한 같은 압밀유효연직응력과 패각함유량에서 상대밀도가 높아질수록 액상화강도가 증가하는 것으로 나타났다.

• 한국관개배수논문집
• /
• 제5권1호
• /
• pp.63-74
• /
• 1998

This study was performed to evaluate the hydraulic conductivity of sand-bentonite mixtures according to 8 kinds of the bentonite content using the reassembled air-entry permeameter. Results obtained are as follows: 1. The maximum dry density and optimum m

• Geomechanics and Engineering
• /
• 제20권3호
• /
• pp.243-254
• /
• 2020

Due to the permanent damage to structures during earthquakes, soil liquefaction is an important issue in geotechnical earthquake engineering that needs to be investigated. Typical examples of soil liquefaction have been observed in many earthquakes, particularly in Alaska, Niigata (1964), San Fernando (1971), Loma Prieta (1989), Kobe (1995) and Izmit (1999) earthquakes. In this study, liquefaction behavior of uniform sands of different grain sizes was investigated by using the energy-based method. For this purpose, a total of 36 deformation-controlled tests were conducted on water-saturated samples in undrained conditions by using the cyclic simple shear test method and considering the relative density, effective stress and mean grain size parameters that affect the cumulative liquefaction energy. The results showed that as the mean grain size decreases, the liquefaction potential of the sand increases. In addition, with increasing effective stress and relative density, the resistance of sand against liquefaction decreases. Multiple regression analysis was performed on the test results and separate correlations were proposed for the samples with mean grain size of 0.11-0.26 mm and for the ones with 0.45-0.85 mm. The recommended relationships were compared to the ones existing in the literature and compatible results were obtained.

• 한국건축시공학회지
• /
• 제17권1호
• /
• pp.111-117
• /
• 2017

Stone powder sludge is a byproduct of the crushed aggregate industry, and most of it is dumped with soil in landfills. The disposal of stone powder sludge presents a major environmental problem. This paper investigates the effects of stone powder sludge on the fluidity, density, strength and micro-structure properties of AAC(autoclaved aerated concrete) samples. Stone powder sludge was obtained from a crushed aggregate factory in order to investigate its applicability as a substitute for quartz sand in AAC. To determine the properties of the AAC samples produced with stone powder sludge, specimens containing different foam ratios were produced. Flow value, density, compressive strength, tensile strength and flexural strength of the samples were tested, and X-ray diffraction (XRD) was performed. The test results indicated that the compressive strength of AAC specimens (F120) with stone powder sludge was higher than that of AAC specimens (Q120) with quartz sand for same foam ratio of 120%. For all XRD diagrams, a higher number of tobermorite peaks was shown for the F120 sample than for the Q120 sample, which may explain the slightly higher strength gain in the F120 sample.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• 제4권1호
• /
• pp.1-8
• /
• 2023

In this study, we aimed to quantify the population size and spatial distribution of three predatory Scarites species in coastal sand dunes. In June and August 2014, 252 pitfall traps were utilized to conduct a trapping web analysis at three distinct sites with varying vegetation dominance values. Scarites sulcatus had the largest estimated population in a 10 m² area with a habitat density of 36.6 in a Vitex rotundifolia community area (site B) in the June survey. In contrast, Scarites aterrimus had the largest population size with a habitat density of 2.9 in a Calystegia soldanella community area (site A) in the August survey. Spatial distribution analysis revealed that S. sulcatus dominated the Vitex rotundifolia community without preference for a particular site, whereas S. aterrimus and Scarites terricola pacificus were primarily observed on the beach. The results indicated that the three Scarites species in the Sohwang coastal sand dune region exhibited differences in their spatial and temporal distributions in the coastal dune ecosystem in order to avoid competition and predation. In conclusion, our findings can be utilized to estimate the population density of the genus Scarites on the Korean Peninsula. The outcomes of this study will contribute to estimating insect population densities on the Korean Peninsula and developing investigative assessment methodologies.