• 대한토목학회논문집
• /
• 제30권5A호
• /
• pp.433-442
• /
• 2010

콘크리트의 염화물 확산계수의 제어는 염해에 노출된 콘크리트 구조물의 내구수명 확보에 필수적이며, 이를 위해 많은 연구가 진행되어 왔다. 본 연구는 목표 내구수명을 만족하는 목표확산계수를 도출하고 유전자 알고리즘을 통하여, 최적배합을 도출하는데 있다. 이를 위하여, 동일한 골재 및 혼화재를 사용한 30개의 배합과 그에 따른 염화물 확산계수를 분석하였으며, 27개를 대상으로 확산계수 예측식을 도출하였다. 확산계수 예측식의 변수로는 물-결합재비, 단위 혼화재량(슬래그, 플라이 애쉬, 실리카퓸), 단위 시멘트량, 단위 잔골재 및 굵은 골재량을 포함하도록 하였으며 나머지 3개의 배합에 대하여 검증을 수행하였다. 최적 함수식은 27개의 배합에 대하여 평균 18.7%의 오차와 16.0%의 변동계수를 보이고 있었다. 주어진 3개의 확산계수에 대하여, 유전자 알고리즘을 통하여 도출된 배합은 0.3%~12.2%의 오차범위를 가지며 각각의 배합인자를 도출하였다. 최종적으로 서로 다른 내구성 설계변수(목표내구수명, 피복두께, 표면염화물량, 혼화재량)와 노출환경(온도 및 습도)을 가정하여 목표 확산계수를 도출하였으며, 이에 만족하는 최적화된 콘크리트 배합을 제안하였다. 본 연구에서는 유전자 알고리즘을 이용하여, 내구성 콘크리트 배합도출에 대한 적용성을 평가하였으며, 제안된 기법은 다양한 확산계수의 범위를 가지는 광범위한 자료구축을 통하여 개선될 것이다.

• 한국건설순환자원학회논문집
• /
• 제1권1호
• /
• pp.89-97
• /
• 2005

최근 천연골재 자원의 고갈과 환경규제의 강화로 인해 콘크리트용 잔골재의 수급문제가 건설산업분야에서 시급히 해결해야할 문제로 대두되고 있어 폐기콘크리트를 활용한 재생잔골재의 콘크리트용 잔골재로의 활용을 위한 연구가 활발히 진행되고 있다. 한편 화학발전소 및 열병합발전소에서 발생되는 석탄회는 그 발생량이 계속적으로 증가하고 있으며, 석탄회중 플라이애시를 콘크리트용 혼화재료로서 사용할 경우 시공성 및 점성 개선, 장기강도 증가 및 수화열 저감 등 많은 장점으로 인하여 보통 콘크리트에서의 활용이 증가하고 있는 실정이나, 재생콘크리트의 혼화재로 활용하기 위한 연구는 미미한 실정이다. 따라서 본 연구에 서는 재생잔골재 및 플라이애시 대체율에 따른 굳지않은 특성, 경화특성, 내구특성을 실험 실증적으로 검토 분석함으로서 재생잔골재를 콘크리트용 잔골재로 활용할 수 있을 뿐만 아니라 플라이애시를 재생콘크리트의 혼화재로 활용하기 위한 기초자료를 제시하고자 하였다. 연구 결과 재생잔골재를 대체한 경우 굳지않은 성상, 정화성상 및 내구성상이 재생잔골재 100%을 치환했을 때 천연잔골재를 사용한 콘크리트와 유사한 수준으로 나타나 콘크리트용 잔골재로서 재생산골재의 활용이 가능한 것으로 사료되었으며, 플라이애시를 고품질 재생잔골재를 사용한 재생콘크리트용 혼화재로 활용함으로서 시공성, 공학적 특성 및 내구특성 등의 성능이 향상되는 것을 확인할 수 있었다.

• 한국건설순환자원학회논문집
• /
• 제2권2호
• /
• pp.68-75
• /
• 2006

The total production of the smelted copper reaches 450,000 tons per year, and the production of copper-related goods grows year by year owing to the extension of facilities and the development of production techniques. On the other hand, the volume of slag discharges by-produced at the time of copper smelting process is also on trend of increase. The by-produced copper smelting slag amounts to 700,000 tons a year, which is one and half times of the total smelted copper production. Accordingly nobody disagrees that comprehensive researches on how to deal with and how to reuse the accumulated smelting copper slag have to be encouraged. Even though the possible uses of the copper smelting slag have being made on various levels at present as materials for iron powder cement, sand-blasting and fire-proofing rock wool, but a considerable volume of the slag is abandoned as unnecessary by burying or piling up in careless in the open ground.

• 상하수도학회지
• /
• 제10권3호
• /
• pp.83-91
• /
• 1996

The pulverized wastes originated from kitchen garbage grinder cause an additional load in sewage treatment plant and water environment. Therefore, several problems occur in sewer, such as microbial corrosion, odor, psychoda and fly interrupting flow of sewage etc. by their precipitation with earth and sand. This study was conducted on two experiments: hydrogen sulfide gas generation from sediments in sewer and anaerobic batch test. In anaerobic batch test, gas generation was increased when organic compounds were increased in concentration. Sulfide was decreased upon decreasing in sulfate concentration. In $H_2S$ gas generation test along the depth of sediments there were two different sampling sites which are apart from about 50 cm each other in a menhole. The one has the thickness of 55 cm from the surface, the other, of 60 cm. The hydrogen sulfide gas production rates were measured based on ranges from 0 to 10 cm, 10 to 20 cm, 20 to 30 cm for two samples. The results obtained were 1.08, between 0 to 10 cm in depth for the sample thickness of 55 cm and 3.07, 5.36, $5.42{\mu}g/g-VS{\cdot}hr$ in order of depth for the sample thickness of 60 cm, respectively.

• 한국군사과학기술학회지
• /
• 제18권5호
• /
• pp.612-620
• /
• 2015

Short-range detection of chemical agents deposited on ground surface using a standoff Raman system employing a pulsed laser at 248 nm is described. Mounted in a vehicle such as an NBC reconnaissance vehicle, the system is protected against toxic chemicals. As most chemicals including chemical warfare agents have unique Raman spectra, the spectra can be used for detecting toxic chemicals contaminated on the ground. This article describes the design of the Raman spectroscopic system and its performance on several chemicals contaminated on asphalt, concrete, sand, etc.

• 한국농공학회지
• /
• 제15권3호
• /
• pp.3096-3106
• /
• 1973

As a link in the chain of antidrought measure, our attempt is made to obtain basic informations on the construction of an infiltration gallary which can be supplied with irrigation water by catching of underground water in small river beds, which is economical, permanent and efficient. The experiment was made, concerning the structure of catchment conduits, by constructing a model sand tank $1.5m{\times}5m{\times}1.5m$ in dimension made of reinforced concrete. Various kinds of measuring equipment were attached to the model tank which contains a set of catchment conduits, each of them was made 30cm in diameter and 60cm in length with the ratio of sectional area to total area of influx holes 10:1, 20:1, 30:1. The average size of influx holes was fixed from 0mm to 10mm, 20mm and 30mm in diameter respectively. Obtained results are as follow; (a) In view of the water catchment capacity, manufacturing cost and the antipressure strength of the catchment conduits, it is the best method to decide the total number of influx holes 20 per sq. meter of each tile surface, and the size of influx holes 20mm in diameter, when the conduits have diameter less than 1m. (b) The greatest factor of safety against external load is to arrange the influx holes in a zigzag manner on the tile surface. The most effective formula of arrangement is $S{\geqq}\sqrt{2gd}$ where: s : spacing of opening row. g : spacing of opening line. d : diameter of influs hole.

• 한국농공학회지
• /
• 제14권2호
• /
• pp.2593-2602
• /
• 1972

Plastic pipes Wrapped with synthetic filter are recently used for drainage or Collecting of Underground water. But it's use is possible only for small size of diameter less than 300mm, because large size plastic pipes are not readily availabe. For large diameter infiltration gallery, porous concrete pipes are now used, but it's heavy weight brings difficulties in making, moving and setting of the pipes. With it's conventional method of filter setting, fine sands are brought into the pipes to make trouble to lifting pumps and channels Therefore, initial construction cost and maintenance cost become high. To solve-this problem, new method is developed and tested. Small PVC pipes(diameter 14mm) are assembled at the site of construction to newly devised I beam type circls. The size of circular inpiltration gallery is optionally determined by I beam type circle which support small PVC pipes and is made of PVC amterial. This gallery are wrappd with syntheitc filter to prevent sand instruction. In this test, the diameter of 300, 400, 500mm were used. I beam type circles were made with PVC plated with thickness. t=6, 9, 12mm. Water quantity collected through the PVC circulor gallery are measured and the strengths of the gallery. 1. Allowable setting depth of gallery pipe below graund for the case of t=6mm, D=500mm is 2.72m. 2. Collected water quantity depends on soil texture, depth of water grandient of water surface, filter material angle of setting etc. 3. About 126% of water quantity collected from the one gallery pipe measured in two gallery pipes of two parallel installation.

• 한국지반공학회지:지반
• /
• 제9권3호
• /
• pp.35-48
• /
• 1993

본 논문은 견고한 지층위에 존재하는 불량한 연약점토와 느슨한 실트질 모래지반에 대한 기초 안정화의 보강방안으로서 석재기등 기초의 설계 시공법을 고찰하고, 광명하안현장에서 석재기둥을 설치 전, 후의 지반에 대한 현장시험을 각각 실시하여 이 공법의 개량효과를 규명한 것이다. 실험 연구 분석한 결과, 석재기등 기초 위에서의 허용지지력과 표준관입시험치는 원지반 보다 각각 3.33배 및 3.9배 증가되어 지지력이 크게 강화됨을 확인하였다. 석재기등과 기성콘크리트 말뚝 기초의 경제성을 비교 검토하여보면 석재기등이 약 35%의 공사비 절감 효과가 있는 것으로 나타난다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.597-602
• /
• 2005

The present precast top-base method create many problems of requiring it plant facilities, transportation and installation, due to the heavy weight of and it takes too long time to set it up on site. In order to improve and solve these problems, in-situ Top-Base method is developed. It include processes that install Top-Base mold made of poly-ethylene into ground, then pouring concrete into the mold, and fill the rest gaps with broken stones. Considerable advantages can be obtained by applying in-situ Top-Base method in aspects of the stability, economical and construction efficiency. In this research, model tests for in-situ Top-Base system are carried out in other to the investigate the load delivering mechanism and the effect of bearing capacity.

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.114-121
• /
• 2009

In this study, acceleration responses of caisson structures under various environmental conditions are experimentally examined as a basic study to develop the health assessment technique for harbor structures. To achieve the objective, three approaches are implemented. Firstly, a target caisson structure is selected and its small-scaled caisson is constructed in the laboratory. Secondly, a finite element model of the caisson is generated to identify dynamic responses of the baseline structure. Thirdly, experimental tests are performed on the caisson model to examine dynamic responses under various boundary conditions and impact locations. Four different boundary conditions, 'standing on concrete floor', 'standing on styrofoam block', 'standing on sand-mat' and 'hanging by crane', are considered and correlation coefficients of frequency response functions between four states are analyzed.