• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.2
• /
• pp.113-122
• /
• 2020

Noise affects the accuracy of three-dimensional shape recovery. Its occurrence is unpredictable and depends on several mechanical, environmental, and other factors. When two-dimensional image sequences are obtained for shape from focus (SFF), mechanical vibration occurs in the translational stage, causing an error in the three-dimensional shape recovery. To address this issue, mechanical vibration is modeled using Newton's second law and the principle of the rack and pinion gear. Then, an optimal sampling step size considering the mechanical vibration is suggested through theoretical demonstration. Experiments conducted with real objects verify the effectiveness of the proposed sampling step size. In this paper, in a realistic environment with noise, the potential of obtaining more accurate three-dimensional reconstruction results of the objects is explored by acquiring the optimal sampling step size, which improves the sampling step size relative to those reported in a previous study performed under similar conditions.

• Journal of Nutrition and Health
• /
• v.17 no.3
• /
• pp.236-241
• /
• 1984

In order to make clear the relationship between sample design and sample survey in community, it was conducted research on sample design for National Nutrition Survey in 1983. In this paper it was tried to analize the data based on The Report of a Settled Population, 1981 conducted by National Bureau of Statistics Economic Planning Board. The sample was basically using stratified two-stage sampling with systematic sampling of Ban or Li as administrative unit. The population represents the whole nation excluding Jeju-do because of budget. The selection of sampling unit and sampling procedure was as follows. 1) Stratify the nation-wide area in 20 sections according to administrative districts. 2) Determine the sample size in each section according to equal proportional rate (1 / 8040) and to about 1,000 households in the sample. 3) Select the 25 sampling units by section according to households proportion. 4) Select the 10 households at random from each Ban or Li according to equal probability proportion as the final sampling unit. Using the procedure, it was sampled 1,000 households for National Nutrition Survey in 1983.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.1 s.256
• /
• pp.55-61
• /
• 2007

Recently simulation model becomes an essential tool for analysis and design of a system but it is often expensive and time consuming as it becomes complicate to achieve reliable results. Therefore, high-fidelity simulation model needs to be replaced by an approximate model, the so-called metamodel. Metamodeling techniques include 3 components of sampling, metamodel and validation. Cross-validation approach has been proposed to provide sequnatially new sample point based on cross-validation error but it is very expensive because cross-validation must be evaluated at each stage. To enhance the cross-validation of metamodel, sequential sampling method using candidate points and representative cross-validation is proposed in this paper. The candidate and representative cross-validation approach of sequential sampling is illustrated for two-dimensional domain. To verify the performance of the suggested sampling technique, we compare the accuracy of the metamodels for various mathematical functions with that obtained by conventional sequential sampling strategies such as maximum distance, mean squared error, and maximum entropy sequential samplings. Through this research we team that the proposed approach is computationally inexpensive and provides good prediction performance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.4
• /
• pp.735-741
• /
• 2009

This paper presents an algorithm for the permanent magnet shape optimization of a large scale BLDC(Brushless DC) motor to minimize the cogging torque. A response surface method (RSM) using multiquadric radial basis function is employed to interpolate the objective function in design parameter space. In order to get a reasonable response surface with relatively small number of sampling data points, additional sampling points are added on the basis of design sensitivity analysis computed by using FEM. The algorithm has 2 stages: the first stage is to determine the PM arc angle, and the 2nd stage is to optimize the magnet pole shape. The developed algorithm is applied to a 5MW BLDC motor to get a minimum cogging torque. After 3 iterations with 4 design parameters, the cogging torque is reduced to 13.2% of the initial one.

• Communications for Statistical Applications and Methods
• /
• v.6 no.2
• /
• pp.523-532
• /
• 1999

Generalized linear models have various applications for data arising from many kinds of statistical studies. Although the response variable is generally assumed to be generated from a wide class of probability distributions we focus on count data that are most often analyzed using binomial models for proportions or poisson models for rates. The methods and results presented here also apply to many other categorical data models in general due to the relationship between multinomial and poisson sampling. The novelty of the approach suggested here is that all conditional distribution s can be specified directly so that staraightforward Gibbs sampling is possible. The prior distribution consists of two stages. We rely on a normal nonconjugate prior at the first stage and a vague prior for hyperparameters at the second stage. The methods are demonstrated with an illustrative example using data collected by Rosenkranz and raftery(1994) concerning the number of hospital admissions due to back pain in Washington state.

• International Journal of Reliability and Applications
• /
• v.12 no.1
• /
• pp.61-77
• /
• 2011

One of the most important problems in the estimation of the parameter of the failure model, is the cost of experimental sampling units, which can be reduced by using any prior information available about ${\theta}$, and devising a two-stage pooling shrunken estimation procedure. We have proposed an estimator of the reliability function (R(t)) of the exponential model using two-stage time censored data when a prior value about the unknown parameter (${\theta}$) is available from the past. To compare the performance of the proposed estimator with the classical estimator, computer intensive calculations for bias, mean squared error, relative efficiency, expected sample size and percentage of the overall sample size saved expressions, were done for varying the constants involved in the proposed estimator (${\tilde{R}}$(t)).

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.337-340
• /
• 2004

Upper stage telemetry system of KSLV- I (Korea Space Launch Vehicle I) is composed of MDU (Master Data Unit), RDU (Remote Data Unit), SRU (Shock Recorder Unit) and Transmitter. RDU is the front-end telemetry data acquisition unit which gathers analog/discrete signals from various sensors and other units, and transmits the processed data to MDU via MIL-STD-I553B data bus. In order to acquire useful data from analog signal, signal conditioning circuits, such as anti-aliasing or amplifying, should be implemented. For this purpose, SCM (Signal Conditioning Module) had been developed. This paper describes hardware structure of SCM and analog signal conditioning circuits for various sensors. Also, sampling time scheme for different sampling rates were designed and tested.

• The Korean Journal of Applied Statistics
• /
• v.14 no.2
• /
• pp.429-437
• /
• 2001

단순 이단계 표본 추출의 경우에 최적 선택률은 Hansen과 Hurwitz(1949)에 의하여 구하여졌다. 그러나 통계청에서 실시하는 표본조사등은 층화 이단계 추출을 한다. 따라서 실제적인 필요성에 의하여 층화 2단계 표본 설계를 시도 하였다. 층화 이단계 표본추출시에 주어진 비용아래서 모총계의 추정량의 분산을 최소로 하는 최적의 선택확률(optimum selection probability), 표본추출율과 부차 표본추출율을 Lagrangean 승수법에 의하여 구한다.

• Communications for Statistical Applications and Methods
• /
• v.6 no.3
• /
• pp.755-760
• /
• 1999

In multivariate stratified sampling surveys it is general to use a few stratification variables which are highly correlated with the important variables at design stage. But there might be some secondary study variables which are not so highly correlated with those stratification variables. In that case it is not efficient to use the same type of estimator due to the secondary variables as the one base on the important variables. A post-stratified estimation is proposed to increase the efficiency of the estimator with existence of secondary variables. The proposed method is illustrated with a set of fishery household population survey data.

• Survey Research
• /
• v.10 no.1
• /
• pp.155-168
• /
• 2009

As an efficient sampling design, stratified random sampling is often used when auxiliary information is available at the designing stage. Although one - per - stratum design is an efficient design that can be used when many auxiliary variables are available, it does not provide any unbiased variance estimator. With a two - per - stratum sample in which two elements are selected from each stratum, it is possible to obtain an unbiased variance estimator. However the loss of efficiency could be significant if any important stratification variable is missed. In this study, we investigated a sampling design that uses the all given auxiliary information and also permits an unbiased variance estimator suggested by Park and Fuller(2008). Through a simulation study, we compared several stratified random sampling and systematic sampling design. We also applied the proposed stratified sampling designs to 2007 youth panel data.