• Structural Engineering and Mechanics
• /
• 제34권6호
• /
• pp.779-799
• /
• 2010

In order to consider high-order effects on the actual limit state function, a new response surface method is proposed for structural reliability analysis by the use of high-order approximation concept in this study. Hermite polynomials are used to determine the highest orders of input random variables, and the sampling points for the determination of highest orders are located on Gaussian points of Gauss-Hermite integration. The cross terms between two random variables, only in case that their corresponding percent contributions to the total variation of limit state function are significant, will be added to the response surface function to improve the approximation accuracy. As a result, significant reduction in computational cost is achieved with this strategy. Due to the addition of cross terms, the additional sampling points, laid on two-dimensional Gaussian points off axis on the plane of two significant variables, are required to determine the coefficients of the approximated limit state function. All available sampling points are employed to construct the final response surface function. Then, Monte Carlo Simulation is carried out on the final approximation response surface function to estimate the failure probability. Due to the use of high order polynomial, the proposed method is more accurate than the traditional second-order or linear response surface method. It also provides much more efficient solutions than the available high-order response surface method with less loss in accuracy. The efficiency and the accuracy of the proposed method compared with those of various response surface methods available are illustrated by five numerical examples.

• 대한수학회보
• /
• 제44권2호
• /
• pp.351-358
• /
• 2007

For an entire function f whose Fourier transform has a compact support confined to $[-{\pi},\;{\pi}]$ and restriction to ${\mathbb{R}}$ belongs to $L^2{\mathbb{R}}$, we derive a nonuniform sampling theorem of Lagrange interpolation type with sampling points ${\lambda}_n{\in}{\mathbb{R}},\;n{\in}{\mathbb{Z}}$, under the condition that $$\frac{lim\;sup}{n{\rightarrow}{\infty}}|{\lambda}_n-n|<\frac {1}{4}$.

• 한국물환경학회지
• /
• 제23권2호
• /
• pp.201-205
• /
• 2007

This paper reports the amount of $^{222}Rn$ and $^{238}U$ in 18 sites of ground water and 30 sites of surface water. The instrument used to count $^{222}Rn$ activity was the liquid scintillation counter (LSC) which could resolute ${\alpha}$ and ${\beta}$ radiations. And $^{238}U$ was analyzed by the inductively coupled plasma (ICP). Radon and Uranium were not detected in raw and treated water which were sampled in a water treatment plant. However, radon ($^{222}Rn$) was high concentration in ground water from Jeon-la, Gang-won. So was uranium ($^{238}U$) in case of ground water from Gang-won, Choong-chung. Radon ($^{222}Rn$) activities were detected less than 15 pCi/L at 5 sampling points, 15~300 pCi/L at 7 sampling points, 300~4000 pCi/L at 6 sampling points. However, Radon ($^{222}Rn$) activities of all ground water samples were less than 4,000 pCi/L, which was bellow American Alternative Maximum Contamination Level (AMCL). Uranium ($^{238}U$) concentrations were less than $0.1{\mu}g/L$ at 5 sampling points, from $0.1{\mu}g/L$ to $20{\mu}g/L$ at 13 sampling points. Uranium was not detected in about 30% of the whole samples, but the concentration ranged from relatively low to high concentrations depending on the sampling point. The minimum detectable activity (MDA) of radon was 15 pCi/L. and the detection limit of uranium was $0.1{\mu}g/L$.

• 한국전자파학회논문지
• /
• 제29권10호
• /
• pp.811-816
• /
• 2018

MLFMM 알고리듬을 큰 산란체 문제에 적용하는 경우, transfer 함수의 계산이 최종 결과의 정확도에 큰 영향을 준다. 수치 과정 중 단위원 위에서 계산되는 적분의 정확도는 샘플링 수에 영향을 크게 받는다. 샘플링 수를 늘리면, 메모리와 계산시간도 같이 늘어나, 정확도가 유지되는 최소의 샘플링 수가 중요하다. 이는 산란체의 크기와 관련이 있어, 수치적으로 최적의 샘플링 수에 관한 오버샘플링 비율을 구하고, 대규모 산란체에서 검증한다.

• Journal of Biosystems Engineering
• /
• 제40권2호
• /
• pp.115-123
• /
• 2015

Purpose: A sampling scheme may significantly affect the accuracy of a sensor. This study was conducted to investigate the effects of sampling point locations on optical reflectance measurements of Chinese cabbage and kale plant leaves. Methods: Variability and similarity of multiple measurements for different parts of the leaves were compared. Results: The results indicate that the variability between the average and individual reflectance spectra was smaller for the blade part than for the vein part. Furthermore, the reflectance for the blade part over the upper leaf area was greater and more stable than those for the other parts for both the cabbage and kale leaf samples. Conclusions: The results provide guidelines for optical reflectance measurements of Chinese cabbage and kale plants. The effects of the number of sampling points, the number of leaves, and the relationships between optical reflectance and leaf components remain to be investigated in the future.

• 한국습지학회지
• /
• 제19권4호
• /
• pp.383-392
• /
• 2017

당항만의 입구(진해만)부터 거산소류지 바로 아래까지 22개의 조사정점을 설정하고 여름은 2013년 8월, 9월(초순), 가을은 10월, 11월에 해역의 부영양화를 조사하였다. 여름철 총클로로필(TChl) 농도는 가을보다 평균 약 3.7배 높은 농도를 나타내었다. 여름에 당항만 중심에 가까운 조사정점들이 담수가 유입하는 바깥쪽 조사정점들보다 평균 약 1.8배 높은 농도를 나타내었다. 여름과 가을에 당항만은 모든 조사정점에서 부영양화 지수(eutrophication index, EI)가 1을 초과함으로서 다른 조건이 갖추어지면 항시 적조가 발생할 수 있는 해역으로 나타났다. 여름과 가을에 EI는 만 입구에서 만의 내측(마동호 예정해역)으로 이동함에 따라 증가하는 추세를 나타내었고, 특히 가을은 조사정점 13~22(마동호 예정해역)에서 급격히 증가하여 나머지 조사정점보다 평균 약 2.3배 높은 값을 나타내었다. 여름과 가을에 당항만은 질소가 조류 성장의 제한영양염류(limiting nutrient)로 나타났으나 여름 장마기간 중에는 인이 제한영양염류로 나타났다. 여름과 가을에 당항만의 EI와 COD, DIN, DIP 사이의 다중선형회귀분석은 유의한 양의 상관관계를 나타내었고, DIP가 EI에 가장 큰 영향을 미치는 변수임을 나타내 주었다. 한편 여름에 TChl과 COD, DIN, DIP, DSi 사이의 다중선형회귀분석은 유의한 양의 상관관계를 나타내었고, DIP가 TChl 농도에 가장 큰 영향을 미치는 변수임을 나타내 주었다. 가을은 TChl과 모든 지표들 사이에 유의한 상관관계가 나타나지 않았다.

• Communications for Statistical Applications and Methods
• /
• 제8권1호
• /
• pp.73-85
• /
• 2001

The spatial population existing in a plane ares, such as an animal or aerial population, have certain relationships among regions which are located within a fixed distance from one selected region. We consider with the adaptive searching estimation in spatial sampling for a spatial population. The adaptive searching estimation depends on values of sample points during the survey and on the nature of the surfaces under investigation. In this paper we study the estimation by the adaptive searching in a spatial sampling for the purpose of estimating the area possessing a particular characteristic in a spatial population. From the viewpoint of adaptive searching, we empirically compare systematic sampling with stratified sampling in spatial sampling through the simulation data.

• 한국전자파학회논문지
• /
• 제26권1호
• /
• pp.88-93
• /
• 2015

대규모 물체의 RCS(Radar Cross Section)값을 임의의 각도에서 예측하기 위해, 미리 계산된 샘플링 지점 외 각도에서는 보간법을 사용한다. 대규모 물체의 경우, RCS 데이터베이스를 구성하기 위해 많은 입사각도에서 RCS값을 계산해야 한다. 이는 수치적으로 시간이 많이 걸려, 실질적으로 필요한 모든 입사각에서 RCS값을 미리 계산하기는 어렵다. 그러므로 가능한 적은 샘플을 이용하여 데이터베이스를 구축하고, 이를 보간하여 RCS값을 예측하는 방법이 필요하다. 본 논문에서는 계산된 RCS를 임의의 각도에서 예측하기 위한 보간법으로 Sinc 함수 및 VSH(Vector Spherical Harmonics) 함수를 이용한 방법을 고려하고, 그 정확성을 시뮬레이션을 통하여 검증한다.

• 한국동물위생학회지
• /
• 제25권1호
• /
• pp.31-37
• /
• 2002

Major hazards existed in slaughterhouse are pathogenic microorganisms originated from intestinal microflora of slaughtered animals. This study was intended for the identification of microbial contamination sources during pork slaughtering in small plants. Total aerobic bacteria, Coliform group, Salmonella spp, Listeria monocytogenes, and Campylobacter jejuni/coli were isolated from the surface sample of pork carcasses. Contamination level among different sampling points of ham, belly and neck did not showed statistical differences. Therefore, the mixed sampling from belly and neck of carcass could be effective for microbiological monitoring. Isolation rates of pathogenic microorganisms showed Salmonella spp 20.9%, Listeria monocytogenes 10.5%, and Campylobacter jejuni/coli 8.1% from 296 sampling points. High prevalence rate of Salmonella spp indicated that the contamination of intestinal microflora occurred due to unsanitary processing control, which required HACCP system in small plants. It was recommended that the prerequisite program should be a key factor for a successful HACCP system implementation especially in small size slaughterhouse.

• Journal of Information Processing Systems
• /
• 제19권2호
• /
• pp.164-172
• /
• 2023

Through theoretical proof and algorithm design, this paper numerically demonstrates that the three sampling methods of DDS are equivalent in amplitude-frequency characteristics. Depending on theoretical analysis, the article obtains the conclusion that 2 points are optimal when sampling at 2, 3, and 4 points. Built on the data results, this paper obtains the fractional form of the amplitude and phase of the DDS sampled signal; in addition, this paper also obtains the design parameters of the DDS post-stage filter. It also gives a control method for the calculation error when addressing this issue.