• Environmental Analysis Health and Toxicology
• /
• 제17권2호
• /
• pp.95-107
• /
• 2002

This study was designed to investigate the characteristics of atmospheric concentrations of toxic volatile organic compounds (VOCs) in Korea. Target compounds included 1,3-butadiene, aromatics such as BTEX, and a number of carbonyl compounds. In this paper, as the first part of the study, the performance of sampling and analytical methods was evaluated for the measurement of selected VOCs and carbonyl compounds in the ambient air. VOCs were determined by the adsorbent tube sampling and automatic thermal desorption coupled with GC/MSD analysis, while carbonyls by the DNPH-silica cartridge sampling with HPLC analysis. The methodology was investigated with a wide range of performance criteria such as repeatability, linearity. lower detection limits, collection efficiency, thermal conditioning, breakthrough volume and calibration methods using internal standards. In addition, the sampling and analytical methods established in this study were applied to real field samples duplicately collected in various ambient environments. Precisions for the duplicate samples appeared to be comparable with the performance criteria recommended by USEPA TO-17. The overall precision of the sampling and analytical methods was estimated to be within 20 ∼ 30% for major aromatic VOCs such as BTEX, whereas the precision for major carbonyl compounds such as formaldehyde and acetaldehyde was within 10 ∼ 20% for field samples. This study demonstrated that the adsorbent sampling and thermal desorption method can be reliably applied for the measurement of BTEX in ppb levels frequently occurred in common indoor and ambient environments.

• 전기학회논문지
• /
• 제57권2호
• /
• pp.294-302
• /
• 2008

In this paper, we present a new image up-sampling method which registers low resolution images to the high resolution grid when Bayesian super-resolution image processing is performed. The proposed up-sampling method interpolates high-resolution pixels using high-frequency data lying in all the low resolution images, instead of up-sampling each low resolution image separately. The interpolation is based on B-spline non-uniform re-sampling, adjusted for the super-resolution image processing. The experimental results demonstrate the effects when different up-sampling methods generally used such as zero-padding or bilinear interpolation are applied to the super-resolution image reconstruction. Then, we show that the proposed hybird up-sampling method generates high-resolution images more accurately than conventional methods with quantitative and qualitative assess measures.

• Communications for Statistical Applications and Methods
• /
• 제14권3호
• /
• pp.667-677
• /
• 2007

In this paper, we propose a method for estimating the mean of a population which has a linear trend, when both n, the sample size, and k, the reciprocal of the sampling fraction, are odd numbers. The proposed method, not having the drawbacks of centered systematic sampling, centered modified sampling and centered balanced sampling, consists of selecting a sample by balanced systematic sampling and estimating the population mean by using interpolation. We compare the efficiency of the proposed method and existing methods under the criterion of the expected mean square error based on the infinite superpopulation model.

• ETRI Journal
• /
• 제23권3호
• /
• pp.129-137
• /
• 2001

A random sampling or systematic sampling method is commonly used to assess the accuracy of classification results. In remote sensing, with these sampling methods, much time and tedious work are required to acquire sufficient ground truth data. So, a more effective sampling method that can represent the characteristics of the population is required. In this study, fractal analysis is adopted as an index for reference sampling. The fractal dimensions of the whole study area and the sub-regions are calculated to select sub-regions that have the most similar dimensionality to that of the whole area. Then the whole area's classification accuracy is compared with those of sub-regions, and it is verified that the accuracies of selected sub-regions are similar to that of whole area. A new kind of reference sampling method using the above procedure is proposed. The results show that it is possible to reduce sampling area and sample size, while keeping the same level of accuracy as the existing methods.

• 응용통계연구
• /
• 제30권5호
• /
• pp.681-690
• /
• 2017

파산감지, 스팸메일 감지, 불량품 감지 등 일상생활에서 불균형적인 이항 분류 문제를 다양하게 접할 수 있다. 반응변수의 클래스의 비율이 상당히 불균형한 경우 이항 분류 모형의 예측 성능이 좋지 않다는 점은 이미 잘 알려진 사실이다. 이러한 문제점을 해결하기 위해 그 동안 오버 샘플링, 언더 샘플링, SMOTE와 같은 여러 샘플링 기법이 개발되어 왔다. 본 연구에서는 분류 모형으로 많이 사용되는 기계학습모형으로 로지스틱 회귀모형, Lasso, 랜덤포레스트, 부스팅, 서포트 벡터 머신을 위의 샘플링 기법들과 결합하여 사용했을 때의 예측 성능을 살펴보았다. 실질적인 예측 성능의 개선 여부를 확인하기 위해 네 개의 실제 자료를 분석하였다. 이와 더불어, 샘플링 방법이 사용될 때 주의해야 할 점에 대해서 강조하였다.

• 한국대기환경학회지
• /
• 제14권1호
• /
• pp.43-62
• /
• 1998

This study was carried out to investigate the influence of different sampling methods on the measured concentrations of polycyclic aromatic hydrocarbons (PAH) both in the vapor and particulate phases, and to evaluate the effects of ambient temperature and sampling duration on the losses of PAH associated with particle samples due to volatilization. The experimental protocol of this study is consisted of two parts. The first part is related to the comparison of PAH concentrations measured by 4 different sampling systems, each of which involves different sampling principles for comparison purposes, including a medium-volume sampler with XAD-2 adsorbent, a high-volume sampler with polyurethane foam (PUF), two identical low-volume samplers: one with XAD-2 and the other with PUF, respectively. The second part of this study is to quantitatively estimate the losses of particulate PAH samples by volatilization during sampling, using two identical low-volume samplers: one was used for changing the filters every 3 hrs, 6 hrs, 12 hrs, and 24 hrs sampling, while the other was maintained for continuous 48 hours sampling without changing the filter. The concentrations of volatile PAH including 2-3 rings appeared to be significantly affected by the type of adsorbent. Measured levels of these lower-molecular weight PAH by XAD-2 adsorbent were much higher than those by PUF for both high-volume and low-volume sampling. PUF was found to give rise to unknown components that interfered with the PAH analysis, even after extensive clean-up. In addition, the retention efficiency of PUF for lower molecular weight PAH was subject to a large variation, being significantly influenced by sampling conditions such as ambient temperature. However, the effect of sampling methods with different adsorbents on the measured levels of semi-volatile compounds including 4 rings PAH such as fluoranthene, pyrene, BaA and chrysene, was not so much significant as more volatile PAH compounds. It was also clear from this study that volatilization losses of the semi-volatile PAH collected on the filters were inevitably occurred during prolonged sampling, and hence the results obtained from conventional sampling methods may not be expected to yield an accurate distribution of PAH between the vapor and particulate phases.

• 한국수학사학회지
• /
• 제11권1호
• /
• pp.68-77
• /
• 1998

There are two approach methods widely in statistical inferences. First is sampling theory methods and the other is Bayesian methods. In this paper, we will introduce the most basic differences of the two approach methods. Especially, we investigate and introduce the historical origin of Bayesian methods in Statistical inferences which is currently used. Also, we introduce the some characteristics of sampling theory method and Bayesian methods.

• 산업진흥연구
• /
• 제8권1호
• /
• pp.111-117
• /
• 2023

품질관리를 위한 샘플링검사 방식은 산업계에서 많이 제안되어왔다. 하지만 시간을 염두에 둔 품질인 신뢰성에 대한 샘플링검사 방식은 상대적으로 덜 제시되었으며, 일목요연하게 요약한 문헌도 그리 많지 않은 편이다. 이에 여기에서는 신뢰성 시험 중 대상 제품의 신뢰성 평가척도값이 목표로 하는 값을 만족하는지 확인하기 위한 신뢰성 적합시험의 설계에 대하여 설명한다. 이를 위해 먼저 소비자와 생산자가 모두 만족할 수 있는 조건은 무엇인지 OC곡선의 측면에서 살펴보면서 원하는 수준의 생산자위험과 소비지위험을 만족하는 샘플링검사가 무엇인지 알아본다. 이어서 신뢰성 샘플링검사 방식은 계수형과 계량형의 두 가지 방식이 있으므로 이들에 대해 살펴본다. 구체적으로 계수형 신뢰성 샘플링검사 방식은 대상 제품 중 n개의 시험품을 샘플링하여 일정 기간인 T시간 동안 시험하여 고장발생수가 c개 이하이면 합격시키는 형태이고, 계량형 신뢰성 샘플링검사 방식은 n개의 시험품을 미리 정한 기준의 시험시간 동안 시험하여 얻어진 시험 데이터를 이용하여 MTBF와 같은 신뢰성 평가척도값을 계산한 후 이 값이 일정 기준을 만족하면 합격시키는 형태이다. 계수형이든 계량형 신뢰성 샘플링검사이든 검사표를 이용할 수도 있다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.577-584
• /
• 2002

We have employed two methods to remove slime at the end of the sampler in clay layers. The first method is a sampling process that harnesses low pressure to clean up the ground around the sampler tip. The second method, in consideration of a disturbed layer, involves a technique of inserting the sampler 50 cm deep into the ground before cleaning up the verge of the sampler by using high pressure. Physical and mechanical properties of these two methods have been compared and analyzed to investigate how different sampling methods affect degree of disturbance. The first method shows little disturbance since the unconfined compression test results in quite greater E$\_$50//q$\_$u/ in the first method than in the second method. On the other hand, the consolidation test results in a slightly greater compression index in the second method than in the first method, when their indexes are compared in the same depth. This suggests that the second method demonstrates less disturbance than the first method does. It is assumed that the second method may reduce disturbance slightly, However, we suspect that choosing any of the two methods would not obtain a considerable difference in sampling.

• ALGAE
• /
• 제24권2호
• /
• pp.111-120
• /
• 2009

Choosing an appropriate sample unit is a fundamental decision in the design of ecological studies. While numer-ous methods have been developed to estimate organism abundance, they differ in cost, accuracy and precision.Using both field data and computer simulation modeling, we evaluated the costs and benefits associated with twomethods commonly used to sample benthic organisms in temperatc kelp forests. One of these methods, theTargeted Sampling method, relies on different sample units, each "targeted" for a specific species or group ofspecies while the other method relies on coefficients that represent ranges of bottom cover obtained from visual esti-mates within standardized sample units. Both the field data and the computer simulations suggest that both meth-ods yield remarkably similar estimates of organisnm abundance and among-site variability, although the Coefficientmethod slightly underestimates variability armong sample units when abundances are low. In contrast, the twomethods differ considerably in the effort needed to sample these communities; the Targeted Sampling requiresmore time and twice the persormel to complete. We conclude that the Coeffident Sampling metliod may be bettcrfor environmental monitoring programs where changes in mean abundance are of central conccm and resources arelimiting, but that the Targeted sampling methods may be better for ecological studies where quantitative reIation-ships among species and small-scale variability in abundance are of central concern.