• Communications for Statistical Applications and Methods
• /
• 제12권1호
• /
• pp.181-189
• /
• 2005

This paper suggest a method of inclusion probability proportional to size sampling that provides a non-negative and stable variance estimator. The sampling procedure is quite simple and flexible since a sampling design is easily obtained using mathematical programming. This scheme appears to be preferable to Nigam, Kumar and Gupta's (1984) method which uses a balanced incomplete block designs. A comparison is made with their method through an example in the literature.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 봄 학술발표회 논문집
• /
• pp.34-42
• /
• 1991

This study is directed for the development of an efficient system-level Importance Sampling Technique for system reliability analysis of bridge structures Many methods have been proposed for structural reliability assessment purposes, such as the First-order Second-Moment Method, the Advanced Second-Moment Method, Computer Simulation, etc. The Importance Sampling Technique can be employed to obtain accurate estimates of the required probability with reasonable computation effort. Based on the observation and the results of application, it nay be concluded that Importance Sampling Method is a very effective tool for the system reliability analysis.

• 대한의용생체공학회:의공학회지
• /
• 제9권1호
• /
• pp.87-92
• /
• 1988

In this paper, a new focusing method, to be called the pipelined sampled delay focusing (PSDF), is implemented. This method improves the lateral resolution in ultrasound imaging system. In PSDF, the analog belay lines are no longer necessary because sampling sum process can replace the conventional delay sum process. Also, the method offers continuous dynamic focusing on the resolution pixel basis, and eliminates the constraint that the maximum delay time is less than the sampling interval. Second order sampling is adopted in order to extend the sampling interval.

• Transactions on Electrical and Electronic Materials
• /
• 제7권4호
• /
• pp.210-214
• /
• 2006

In this paper, two sampling methods which are Latin hypercube sampling (LHS) and simple random sampling were. compared to improve the modeling speed of neural network model. Sampling method was used to generate initial weights and bias set. Electrical characteristic data for $HfO_2$ thin film was used as modeling data. 10 initial parameter sets which are initial weights and bias sets were generated using LHS and simple random sampling, respectively. Modeling was performed with generated initial parameters and measured epoch number. The other network parameters were fixed. The iterative 20 minimum epoch numbers for LHS and simple random sampling were analyzed by nonparametric method because of their nonnormality.

• 산업경영시스템학회지
• /
• 제8권11호
• /
• pp.85-95
• /
• 1985

This thesis is a study on the work sampling method which is one of the important parts in the fields of work measurement today. The primary objective of this study is to examine various methods of selecting observation times in work sampling studies, including simple random systematic, and stratified sampling and a new method called restricted random sampling. The attribute of these sampling methods are explained, particulary statistical efficiency, and the important advantages of stratification are analysed. A case study of work sampling was made in a manufacturing plant to show its practical application and the effectiveness of the stratified random sampling technique.

• 한국수산과학회지
• /
• 제54권1호
• /
• pp.80-89
• /
• 2021

In Korea, marine fish landed at ports are randomly sampled on a periodic basis (e.g., daily or weekly), and body sizes (e.g., lengths and weights) of those sampled fish are measured. The motivation for our study is whether or not such measurements reflect the size distribution, especially the length distribution of fish landed (= a population), because such length measurements are key data for a length-based assessment model. The current sampling method is to sample fish landed at ports by body size group (e.g., very small, small, medium, large, very large), using the sampling weights as the number of boxes by body size group. In this study, we showed that length composition data about fish sampled by the current method did not represent the length frequency distribution of the fish landed, and suggested that an alternative sampling method should be applied of using the sampling weights as the number of fish landed by body size group. We also introduced a method for determining an appropriate sample size.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.577-584
• /
• 2002

We have employed two methods to remove slime at the end of the sampler in clay layers. The first method is a sampling process that harnesses low pressure to clean up the ground around the sampler tip. The second method, in consideration of a disturbed layer, involves a technique of inserting the sampler 50 cm deep into the ground before cleaning up the verge of the sampler by using high pressure. Physical and mechanical properties of these two methods have been compared and analyzed to investigate how different sampling methods affect degree of disturbance. The first method shows little disturbance since the unconfined compression test results in quite greater E$\_$50//q$\_$u/ in the first method than in the second method. On the other hand, the consolidation test results in a slightly greater compression index in the second method than in the first method, when their indexes are compared in the same depth. This suggests that the second method demonstrates less disturbance than the first method does. It is assumed that the second method may reduce disturbance slightly, However, we suspect that choosing any of the two methods would not obtain a considerable difference in sampling.

• 대한의용생체공학회:의공학회지
• /
• 제27권1호
• /
• pp.6-13
• /
• 2006

Ultrasound visualization is a typical diagnosis method to examine organs, soft tissues and fetus data. It is difficult to visualize ultrasound data because the quality of the data might be degraded by artifact and speckle noise, and gathered with non-linear sampling. Rendering speed is too slow since we can not use additional data structures or procedures in rendering stage. In this paper, we use several visualization methods for fast rendering of ultrasound data. First method, denoted as adaptive ray sampling, is to reduce the number of samples by adjusting sampling interval in empty space. Secondly, we use early ray termination scheme with sufficiently wide sampling interval and low threshold value of opacity during color compositing. Lastly, we use bilinear interpolation instead of trilinear interpolation for sampling in transparent region. We conclude that our method reduces the rendering time without loss of image quality in comparison to the conventional methods.

• Spatial Information Research
• /
• 제8권1호
• /
• pp.171-182
• /
• 2000

분류기법에 의해 원격탐사 영상으로부터 취득된 면속성 수치 지도는 GIS 의사결정자료로 사용되기 이전에 그 정확성에 관한 신뢰도 검증과정을 거쳐야 한다. 분류 정확도를 평가하기 위해서는 오분류행렬(confusion matrix)을 사용하여 전체 정확도, 사용자 정확도, 제작자 정확도 등을 얻게 되는데, 이때 오분류행렬을 구성하기 위해서는 기준자료(reference data)에 대한 표본추출이 이루어져야한다. 기준자료의 표본을 추출하는 기법간의 비교 및 표본 크기를 줄이고자 하는 연구는 많이 이루어져 왔으나, 추출된 표본들간의 거리를 줄임으로서 정확도 평가 비용을 감소시키고자 하는 연구는 미비한 실정이다. 따라서 본 연구에서는 프랙탈 분석을 통하여 기준자료의 표본을 추출하였으며, 이를 바탕으로 기존의 표본추출의 기법과 정확도 차이 및 비용효과 측면을 비교 분석하였다. 연구 결과 , 프랙탈 분석을 통하여 표본을 추출하는 기법은 그 정확도 추정에 있어 기존의 표본추출 기법과 큰 차이를 보이지 않았으며, 추출된 화소들이 가까운 저리에 군집에 있어 비용효과측면에서 유리함을 확인하였다.

• 품질경영학회지
• /
• 제40권3호
• /
• pp.245-258
• /
• 2012

Purpose: Recently, many quality issues are aroused in military forces, such as failures in K-series weapons, combat boots defects and 40mm ammunition explosion accident. To address these problems, the one and only government defense quality assurance agency, DTaQ(Defense Agency for Technology & Quality) tried to improve many quality assurance procedures and introduced new systems such as MRA(Manufacturing Readiness Assessment), TRA(Technology Readiness Assessment), and etc. However, as the amount of war supplies increasing every year, the resource(budget and manpower) for quality assurance is limited. Therefore, DTaQ had difficulty to handle the issue efficiently and effectively, and we propose the method to address this problem. Methods: The most popular quality assurance technique is a sampling method, in this research, we first review the many sampling techniques and compare the strength and weakness of each method. After then, we selected the most appropriate sampling techniques and applied the procedures in combat force support material and ammunition areas. Results: We can reduce the number of samples dramatically, thus the required amount of labor time and money can be saved. Also, the new sampling technique enforces the supplier to produce the product which meets the target value(desirable value). Conclusion: We can reduce the number of samples dramatically, thus the required amount of labor time and money can be saved. Also, the new sampling technique enforces the supplier to produce the product which meets the target value(desirable value). Lastly, since the new sampling method requires many numerical calculations, we developed a simple android OS smart-phone application which can be used easily in field.