• The Journal of Korean Medicine
• /
• v.21 no.3
• /
• pp.88-98
• /
• 2000

Objectives : This study was carried out to evaluate the effect of Boyanghwano-tang Extracts on Reversible Forebrain Ischemia in Mongolian Gerbils. Methods : The water content of cerebral edema and the morphologicalㆍneurocytochemistrical change of neuron in MG were implemented to conduct this study. Results : The change rate of water content by ischemia in the normal group was 78.90% on the third day and 79.12% on the seventh day after an attack of ischemia. The rate in the control group was 80.34% and 81.72%. In the sample group the rate was 79.85% and 80.97%. This is a significant result. According to the result of the optical microscopic examination, the cells seen to be continuous and systematic in the pyramidal cells of hippocampus were changed into discontinuous and unsystematic forms in the control group. But compared with the control group, the cells were less damaged in the sample group. Conclusions : The data shows that the effect of Boyanghwano-tang Extracts on Reversible Forebrain Ischemia in MG is a significant result.

• 전기의세계
• /
• v.28 no.5
• /
• pp.39-43
• /
• 1979

The aging of permittivity of a barium titanate dielectrics doped with La$_{2}$O$_{3}$ under zero and low DC field has been studied. The aging rate was decreased as the amount of La$_{2}$O$_{3}$ addition is increased to 3 mole%. The zero field aging rate of barium titahate doped with La$_{2}$O$_{3}$. 3TiO$_{2}$ was similar to that doped with La$_{2}$O$_{3}$.5V/mil DC field aging rate of La$_{2}$O$_{3}$.3TiO$_{2}$ doped sample, howeve, was lowered to that of La$_{2}$O$_{3}$ doped sample. When the phase transformation is occured from the paraelectric state to the ferroelectric state, 90.deg. domains are mucleated in order that the system becomes thermodynamically more stable. It is concluded that the aging phenomenon is occured as the dielectric constant is decreasing by the nucleation and growth of 90.deg. domains.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1750-1754
• /
• 2013

A variable bit rate speech coder is presented. The coder is based on the observation that a speech signal can be viewed as a combination of piecewise linear signals in a short time period. The encoder detects the sample points where the slope of the signal changes, which are called the inflection points in this paper. The coder transmits the location and value for the detected inflection sample, but only the location information for the noninflection samples. In the decoder, the noninflection samples are estimated with interpolation of the received information. Several factors affecting the performance of the coder have been tested through simulation. Simulation results show that the linear interpolation produces 1 ~ 5 dB improvement over the cubic spline interpolation. And the -law companding does not provide any benefit when it is applied before the inflection detection. With low threshold values in the inflection point detection, the coder shows better MOS and more than 16 dB improvement in SNR compared to the continuously variable slope delta modulation (CVSDM).

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.233-236
• /
• 2004

This paper proposes new method for the enhancement of nonexistent high frequency spectral contents from low sample rate audio signal. For example, Due to the protocol constraint, the audio bandwidth of MP3 is restricted to 16Khz. Although band-restricted MP3 audio provide savings of storage space and network bandwidth, it suffers a major problem of a loss in high frequency fidelity such as localization, ambient information, and bright nature of audio. This paper provides a new mathematical analysis for the adaptive estimation of the high frequency contents based on the nature of the input low sample rate audio. Proposed method can be worked globally to any kind of audio such as speech and music that are restricted by sampling rate and bandwidth.

• Textile Coloration and Finishing
• /
• v.10 no.3
• /
• pp.50-56
• /
• 1998

Nonwoven fabric was treated with chitosan solution to impart antimicrobial activities by pad-dry method. Antimicrobial activity was measured by Shake Flask Method. Two chitosans of different molecular weight(Mw) with similar degree of deacetylation(DDA) were used : ca. 1,800(chitosan oligomer : DDA 84%) and 180,000(DDA 86%). Chitosan oligomer displayed high antimicrobial activity against P. vulgaris at 0.01%, S. aureus and E. coli at 0.05% treatment concentration, shelving above 90% of reduction rate. Chitosan of Mw 180,000 was effective against S. aureus, E. coil and P. vulgaris at 0.05% treatment concentration, showing almost 100% reduction rate. While chitosan of Mw 180,000 shelved reduction rate above 75% against K. pneumoniae and P. aeruginosa at 0.5% treatment concentration, chitosan oligomer was not effective against them. Fabrics become stiffer and less air permeable as treatment concentration increases. Liquid strike-through time of the sample treated with 0.5% chitosan oligomer solution (3.0 sec) was comparable with a hydrophilic finished sample commercially available(2.6 sec).

• Bulletin of the Korean Chemical Society
• /
• v.14 no.2
• /
• pp.275-281
• /
• 1993

The new high temperature plasma source for spectrochemical analysis has been developed and characterized. In the development of new high temperature plasma sources for atomic emission spectrocopy, optimization of experimental variables is necessary to achieve the best analytical results. By means of a modified sequential simplex optimization method, six experimental variables were optimized. The line-to-background (L/B) ratio for Ca(II) at 393.37 nm was used as measure of the response function. The optimal experimental conditions were found to be at a current of 27.8 A, a plasma length of 28.8 mm, a sample uptake rate of 1.3 ml/min, a sample carrier gas flow rate of 0.7 ml/min, a plasma gas flow rate of 4.9 l/min, and an observation height of 6.4 mm above the top quartz tube.

• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.120-126
• /
• 2002

The analytical performance of four commercially-available pneumatic nebulizers(Meinhard, Cross-flow, Babington, ESI PFA) was evaluated using inductively coupled plasma-atomic emission spectrometry (ICP-AES) and ICP-mass spectrometry (ICP-MS) instruments. The performance of an inert concentric nebulizer and a modified conespray nebulizer, made in Korea Research Institute of Standards and Science (KRISS), is compared with that of the four commercial nebulizers. Variation of sample introduction efficiency was investigated as carrier argon pressure and sample uptake rate were changed. Variation of sensitivity, signal stability, blank intensity and oxide/hydride ratios were also studied when the nebulizers were connected to the ICP-MS and ICP-AES instruments. It was found that good analytical result such as high sensitivity, low blank, stable signal and so on can be obtained with judicious selection of the nebulizer depending on the type of sample, sample amount, type of analytical instrument and analyte.

• Fire Science and Engineering
• /
• v.13 no.4
• /
• pp.7-12
• /
• 1999

Thermal properties of EVA dust and its risks of coexisting with oxidizer were investigated by a pressure vessel. The decomposition of EVA dust with temperature using DSC and the weight loss with temperature using TGA were also investigated to find the thermal hazard of EVA dust. Using the pressure vessel which can estimate ignition and explosion of EVA dust coexisting with oxidizer by bursting of a rupture disc, many experiments have been conducted by varying the orifice diameter, heating rate, the weight ratio of the sample coexisting with oxidizer, and the species of oxidizer. According to the results of the thermal analysis of EVA dust, a little change of the decomposition initiation temperature with the heating rate could be found and the decomposition temperature zone of EVA dust was 250 to 50$0^{\circ}C$. The risk of EVA dust coexisting with oxidizer was increased as the orifice diameter was decreased. On the other hand, it was increased as the heating rate and the weight ratio of the sample coexisting with oxidizer were increased. In addition, the risk of EVA dust coexisting with oxidizer was affected by the decomposition temperature of the sample and oxidizer, respectively, at slow heating rate, but it was affected by the oxygen weight percent of oxidizer at fast heating rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6072-6081
• /
• 2013

In this study, experiments were performed on air heater samples with three different shapes (chevron, wave and dimple type) to reduce the plumes from cooling towers. The tests were conducted for a range of frontal air velocities of 1~3 m/s and water flow rate 0.19~0.33 kg/s. The results showed that the heat transfer rate increased with increasing air velocity or water flow rate. The air-side pressure drop also increased with increasing air velocity. At the same frontal air velocity, the highest heat transfer rate was obtained for the chevron sample (1.5~1.7 times compared to that of the plate sample), followed by the dimple, wave and plate samples. The heat transfer rate per unit power consumption was also 15% larger than that of the dimple sample. On the other hand, there was no noticeable difference between the other samples.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2391-2400
• /
• 1999

Vector quantizer (VQ) is an efficient data compression technique for low bit rate applications. However, the major disadvantage of VQ is its encoding complexity which increases dramatically as the vector dimension and bit rate increase. Even though one can use a modified VQ to reduce the encoding complexity, it is nearly impossible to implement such a VQ at a high bit rate or for a large vector dimension because of the enormously large memory requirement for the codebook and the very large training sequence (TS) size. To overcome this difficulty, in this paper we propose a novel structurally constrained VQ for the high bit rate and the large vector dimension cases in order to obtain VQ-level performance. Furthermore, this VQ can be extended to the low bit rate applications. The proposed quantization scheme has a form of feed-forward adaptive quantizer with a short adaptation period. Hence, we call this quantization scheme sample-adaptive product quantizer (SAPQ). SAPQ can provide a 2 ~3dB improvement over the Lloyd-Max scalar quantizers.