• Analytical Science and Technology
• /
• v.20 no.5
• /
• pp.419-423
• /
• 2007

Environmental low level tritium analysis was studied using liquid scintillation counter(LSC) and electrolytic enrichment method. To obtain low level blank count, various counting vials were investigated. Among them, teflon coated PE vial had a lower blank count rate (1.86 cpm) and we obtained 2.01 Bq/L detection and tritium separation factor was above 20. LSC counting efficiency obtained $28.70{\pm}0.27%$ using the NIST tritium standard water sample.

• Journal of the Korean Chemical Society
• /
• v.48 no.6
• /
• pp.583-589
• /
• 2004

In a stream of aqueous sample, trace arsenic ions were quantitatively coprecipitated and detected in ICP-AES through hydride generation. In was used as a coprecipitating reagent. The precipitate was collected on a filter and dissolved by HCl. The eluted As was sent into the reaction coil to generate hydrides and analyzed by ICP. With optimal conditions, and with a sample of 0.3 mL, an enrichment of 70 was obtained with the sampling speed of 10/hr. When compared with coprecipitation and hydride generation technique, the sensitivity was increased by 7 and 10 times, respectively. The limit of detection limit$(3{\sigma})$ was 0.020 ${\mu}g\;L^{-1}$ and the precision was 7-10%. Separation of $As^{3+}\;and\;As^{5+}$ were possible using citric acid in hydride generation.

• Korean Journal of Materials Research
• /
• v.31 no.1
• /
• pp.38-42
• /
• 2021

In this study, high temperature wetting analysis and AZ80/Ti interfacial structure observation are performed for the mixture of AZ80 and Ti, and the effect of Al on wetting in Mg alloy is examined. Both molten AZ80 and pure Mg have excellent wettability because the wet angle between molten droplets and the Ti substrate is about 10° from initial contact. Wetting angle decreases with time, and wetting phenomenon continues between droplets and substrate; the change in wetting angle does not show a significant difference when comparing AZ80-Ti and Mg-Ti. As a result of XRD of the lower surface of the AZ80-Ti sample, in addition to the Ti peak of the substrate, the peak of TiAl3, which is a Ti-Al intermetallic compound, is confirmed, and TiAl3 is generated in the Al enrichment region of the Ti substrate surface. EDS analysis is performed on the droplet tip portion of the sample section in which pure Mg droplets are dropped on the Ti substrate. Concentration of oxygen by the natural oxide film is not confirmed on the Ti surface, but oxygen is distributed at the tip of the droplet on the Mg side. Molten AZ80 and Ti-based compound phases are produced by thickening of Al in the vicinity of Ti after wetting is completed, and Al in the Mg alloy does not affect the wetting. The driving force of wetting progression is a thermite reaction that occurs between Mg and TiO2, and then Al in AZ80 thickens on the Ti substrate interface to form an intermetallic compound.

• Analytical Science and Technology
• /
• v.20 no.6
• /
• pp.468-473
• /
• 2007

The chemical composition distribution of the surface samples collected from the loess plateau in China were estimated. Major elements concentration distribution difference between 10 different sampling site were not found except sample 3. This sample had higher contents of Ca, Mg, LOI and lower contents of Si, Fe, P, Na, Ti. And also, minor element contents such as Ba, Cr, Nb, Pb, Rb, Zr, V were lower than other samples. UCC-normalized abundances of the most elements were within $0.5-1.5{\times}UCC$ and Cr showed enrichment aspect. Rare-earth element (REE) analysis results showed light REE enriched pattern compared to heavy REE with negative Eu anomaly in condrite-normalized REE pattern.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.549-552
• /
• 2004

A sensitive, selective and rapid method has been developed for the determination of mercury based on the rapid reaction of mercury(II) with p-sulfobenzylidenethiorhodanine (SBDTR) and the solid phase extraction of the colored chelate with $C_{18}$ disks. In the presence of pH 3.5 sodium acetate-acetic acid buffer solution and Emulsifier-OP medium, SBDTR reacts with mercury(II) to form a red chelate of a molar ratio 1 : 2 (mercury to SBDTR). This chelate was prconcentrated by solid phase extraction with $C_{18}$ disks. An enrichment factor of 50 was achieved. The molar absorptivity of the chelate is $1.28{\times}10^5 L{\cdot}mol^{-1}{\cdot}cm^{-1}$ at 545 nm in measured solution. Beer's law is obeyed in the range of 0.01-3 ${\mu}$g/mL. The relative standard deviation for eleven replicates sample of 0.01 ${\mu}$g/mL is 1.65%. This method was applied to the determination of mercury in tobacco and tobacco additive with good results.

• Korea Journal of Hospital Management
• /
• v.13 no.1
• /
• pp.84-102
• /
• 2008

The purpose of this study is to investigate the determinants of the occupational commitment of dental hygienists in Korea. The independent variables contain three groups of work rewards variables which consist of task reward variables (autonomy, job significance, resource adequacy, role conflict, workload, and routinization), social reward variables(supervisory support, co-worker support, and negative affectivity), and organizational reward variables(job security and promotional chances), and eight sociodemographic variables. The sample of this study consisted of 474 dental hygienists who work at general hospitals, university hospitals, dental hospitals and clinics across the nation. Data were collected with self-administered questionnaires and analyzed using hierarchical regression technique. It was found that: (1) job significance have a significant positive effect on the occupational commitment of dental hygienists; (2) role conflict, workload, routinization, and type of work site have significant negative effect on the occupational commitment of dental hygienists; (3) the study model explains 23.7% of the variance in occupational commitment among dental hygienists. The results of the study indicate that managers of dental clinics and hospitals should make efforts to extend the scope and quality of dental hygienists' work through job enlargement and job enrichment.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.11
• /
• pp.1740-1746
• /
• 2006

Enrichment techniques led to the isolation of a Pseudomonas sp. strain P2 from municipal waste-contaminated soil sample, which could utilize different isomers of a commercial mixture of 4-nonylphenol when grown in the presence of phenol. The isolate was identified as Pseudomonas sp., based on the morphological, nutritional, and biochemical characteristics and 16S rDNA sequence analysis. The ${\beta}$-ketoadipate pathway was found to be involved in the degradation of phenol by Pseudomonas sp. strain P2. Gas chromatography-mass spectrometric analysis of the culture media indicated degradation of various major isomers of 4-nonylphenol in the range of 29-50%. However, the selected ion monitoring mode of analysis of biodegraded products of 4-nonylphenol indicated the absence of any aromatic compounds other than those of the isomers of 4-nonylphenol. Moreover, Pseudomonas sp. strain P2 was incapable of utilizing various alkanes individually as sole carbon source, whereas the degradation of 4-nonylphenol was observed only when the test organism was induced with phenol, suggesting that the degradation of 4-nonylphenol was possibly initiated from the phenolic moiety of the molecule, but not from the alkyl side-chain.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1994.02a
• /
• pp.35-35
• /
• 1994

The surface segragation of NiZr, CuZr alloy has been studied wi th X-ray Imotoelectron spectroscopy(XPS), Auger electron spectroscopy(AES) and low energy ion scattering(LEIS). The composition of outmost atomic layer has been determinded by the use of LEIS at several incident energies using Ar+ ion. In the LEIS analysis, the effect of charge exchange has been estimated by a novel measurment of the charge exchange parameters while simul taneous determining the relative concentrations of Ni and Zr and the complementary information obtained will be described. The composition of the clean annealed surface, measured with AES only, will be contrasted wi th the surface concentration of the preferentially sputtered surface. The experimental results has been clearly demonstrated that when the NiZr ruld CuZr alloys are exposed to continuous Ar+ ion bombardment the outermost atomic layer is Zr rich due to preferential sputtering of Ni atoms. where Ni is preferentially sputtered, but the difference in sputtering yields is not sufficient to explain the observed composition. Therefore, it is necessary to consider other processes such as Radiation Induced Segregation(RIS). The surface composition of the heated sample surface predicts that Zr should surface segregate which futher supports the view that part of the Zr enrichment is due to RIS.to RIS.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.2
• /
• pp.256-266
• /
• 2014

The purpose of this study was to determine the optimal mixing conditions of soybean oil and bread crumbs mixture for pork patty. The experiment was designed according to the central composite design of response surface methodology. There were ten experimental points, including two replicates for soybean oil and bread crumbs. The physicochemical and mechanical analyses of each sample, including pH, cooking loss, thickness increase, moisture content, lightness, hardness, adhesiveness, springiness, chewiness, and gumminess showed significant differences (p<0.05). The results of sensory evaluation showed significant differences in tenderness, juiciness, and overall quality (p<0.05). The optimum formulation calculated by numerical and graphical method was 13.61 g of soybean oil and 6.35 g of bread crumbs. The results obtained in this study will be useful to the meat industry, which tends to decrease the saturated fatty acid content with a concomitant enrichment in the unsaturated fatty acids content.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.42.2-42.2
• /
• 2017

We performed low-resolution spectroscopy for the red giant stars in the Galactic globular cluster (GC) NGC 5286, which is known to show intrinsic heavy element variations. We found that these stars are clearly divided into two subpopulations by CN index. These two subpopulations also show significant differences in the HK'and CH indices, where the CN-strong stars are more enhanced in both indices. From the comparison with high-resolution spectroscopic data of Marino et al. (2015), we found that the CN- and HK'-strong stars are also increased in the abundances of s-process elements and Fe. It appears that, therefore, these stars are later generation stars probably affected by supernova enrichment. In addition, NGC 5286 shows the CN-CH positive correlation among the whole sample, which is only discovered in the GCs with heavy element variations such as M22 and NGC 6273. Therefore, these results strengthen our previous suggestion that the CN-CH positive correlation may be associated with the heavy element variations in the GCs.