• 한국환경복원기술학회지
• /
• 제15권6호
• /
• pp.29-41
• /
• 2012

This study was conducted in Ningxia Hui autonomous region, located at southern part of Mu Us sand land in China. To investigate relationships between windbreak effect and installation cost of sand barriers, plastic net is utilized by using four kind of heights (0.2, 0.3, 0.4 and 0.5m) and four kind of porosities (20, 30, 50 and 70%). These heights and porosities are measured for estimating distances for effective windbreak. It is shown that porosity and the distance have a positive relationship at same heights and porosity on ground indicates a constant figure when height reaches a certain level, regardless of the porosity. This implies that there is a difference of level of windbreak with different porosities; however, distance of windbreak effect is same at the same height of sand barrier. As a result of comparison between porosity of sand barrier on the ground and installation cost in each sand barrier with various heights and porosities (16 combinations), 0.4m and 0.5m height sand barriers describe highest economical efficiency. Within two variables, we concluded that height has a higher impact on windbreak effect than porosity.

• The Journal of Asian Finance, Economics and Business
• /
• 제6권4호
• /
• pp.53-63
• /
• 2019

The paper examines the influence of profitability on distance to default (DD) in Vietnam securities market. The investigated sample consists of 211 companies listed on HOSE during 18 years from 2010 to 2017. We apply KMV model to calculate distance to default and use both macroeconomics factors and firm specific factors as independent variables. Using General Least Squared (GLS) method, we find evidence to confirm the positive relationship between profitability and distance to default. This result showed that, although profitability did not directly reflect the cash flow generated, a good profitable enterprise would be an important factor to help facilitate and generate cash flow and at the same time debt was guaranteed when it was due. Besides, the test results revealed that the financial structure and sales on assets have the inverse effect on the distance to default at the significance level of 5%. The results also revealed that a group of macro factors had an influence on the distance to default of businesses, including spread, GDP and trade balance (via exchange rates). Gross domestic income had certain impacts on the distance to default of businesses. This was also a basic indicator measuring the national economic cycle.

• 한국콘텐츠학회논문지
• /
• 제15권8호
• /
• pp.424-433
• /
• 2015

본 연구는 조음거리와 발성유형에 따른 영유아의 자음 음운인식 능력에서의 차이를 규명해 보기 위해 한국어 장애음을 대상으로 반복측정 실험설계를 통해 진행되었다. 집단 내 변인인으로서의 조음거리는, 연음과 경음의 자질을 갖는 1음절 초성의 조음 위치에 의해 구분된 조음점 간 거리로서 음운인식 수행도의 차이에 구조적으로 영향을 미치는지를 확인하고자 하였다. 실험결과, 음운차이 인식 수행력에서 조음거리를 변인으로 한 주효과를 확인하였는데, 그 거리가 멀어질수록 수행력이 점강하였다. 이는 동일위치나 근접거리 조음점 조건의 음운인식 수행도가 조음점 간 거리가 먼 조건에서의 수행도에 비해 민감한 반응을 보임으로써, 당해 조음점에 인접한 말소리들을 인식하는 능력이 우선 발달하는 결과를 시사함은 물론, 조음 유사성이 조기 음운습득에 영향을 끼칠 수 있음을 말해준다 하겠다. 아울러 집단 간 요인에서도 연령효과를 확인할 수 있었는데, 연령이 높을수록 조음거리에 영향을 덜 받는 경향이 있었으며 인접거리 조건에서는 남아대비, 여아의 수행력이 우수함을 알 수 있었다. 발성유형 중 긴장성을 피험자 내 변인으로 설정한 조건의 주효과는 나타나지 않았지만 연령의 주효과 및 성별과의 상호작용을 통해 연령상승에 따른 긴장음의 인식률의 유의한 상승을 관찰하였고, 긴장음 내에서는 여아의 변별력이 더 우수함을 확인할 수 있었다.

• 한국실내디자인학회논문집
• /
• 제15권4호
• /
• pp.123-128
• /
• 2006

The purpose of the research is to estimate the amount of a color image reaction variation by changing areas in order to design the method to reduce an error about the color sample when it is applied in the real situation. The summary of the results acquired in this research is as followed. (1) With fixed observing distance of 1m, we observed that the value and chroma of each color object became higher as sight angle was increased as $2^{\circ},\;10^{\circ},\;and\;30^{\circ}$, even though the variation ratio was different. (2) With fixed sight angle of 10, we observed that the value and chroma of each color object becane higher as observing distance was changed from 1m to 3.3m, even though the variation ratio was different. (3) With same area, we observed that the values and chromas of each color object in the conditions of $1m-30^{\circ}\;and\;3.3m-10^{\circ}$ were almost same. (4) When the area became larger, the subjects tended to feel that colors were bright and clear with the increase of tone. In all the colors, the variation of a color reaction in chroma is higher than those in value. In future, we can observe the limit in applying to colors in the architecture by identifying the tendency of the color change according to the area change qualitatively.

• Geomechanics and Engineering
• /
• 제15권3호
• /
• pp.911-917
• /
• 2018

This paper concerns a numerical investigation on the effect of construction sequence on three-arch (3-Arch) tunnel behavior. A three-arch tunnel section adopted in a railway tunnel construction site was considered in this study. A calibrated 3D finite element model was used to conduct a parametric study on a variety of construction scenarios. The results of analyses were examined in terms of tunnel and ground surface settlements, shotcrete lining stresses, loads and stresses developed in center column in relation to the tunnel construction sequence. In particular, the effect of the side tunnel construction sequence on the structural performance of the center structure was fully examined. The results indicated that the load, thus stress, in the center structure can be smaller when excavating two side tunnels from opposite direction than excavating in the same direction. Also revealed was that no face lagging distance between the two side tunnels impose less ground load to the center structure. Fundamental governing mechanism of three-arch tunnel behavior is also discussed based on the results.

• 화약ㆍ발파
• /
• 제32권1호
• /
• pp.1-9
• /
• 2014

외부장약 발파시 부재와 폭약의 이격거리에 따른 절단 및 파괴양상을 확인하기 위하여 강 부재와 콘크리트 부재에 TNT 카트리지 폭약을 이용하여 실험을 하였다. 실험 결과 강 부재나 콘크리트 부재에 대한 파괴 장전공식은 다소 보수적인 것으로 판단되었다. 콘크리트 부재에 비해 강 부재가 폭약 이격거리에 대한 파괴영향이 큰 것으로 판단된다. 강 부재의 경우 표준폭약 이상으로 장전해도 폭약이 부재에서 2cm 이격된 경우 절단되지 않고 구부러짐만 나타났다. 같은 이격에 대하여 콘크리트 블록 부재의 경우 구조물의 파괴를 유도하는데 문제가 없을 것으로 판단된다.

• 한국멀티미디어학회논문지
• /
• 제4권5호
• /
• pp.430-438
• /
• 2001

본 논문에서는 공동 브라우징을 지원하는 웹 기반의 동기적 원격 학습 시스템의 설계와 구현 내용을 소개한다. 본 논문에서 제안하는 시스템은 학사관리 시스템, 화이트보드 시스템, 화상 회의 시스템, 공동 브라우징 시스템, 그리고 세션 관리자로 구성되어 있다. 본 시스템을 구성하는 시스템 중 공동 브라우징 시스템은 다른 원격학습 시스템에서 찾아보기 어려운 독특한 시스템이다. 우리의 공동 브라우징 시스템은 상용 웹 브라우저에서 실행되며, 교사가 교육에 필요한 웹사이트들을 이동할 때 교사의 웹 브라우저의 내용을 그대로 사용자에게 동기화 되어 보여줌으로써 마치 학습자 자신이 웹 서핑을 하는 것처럼 느끼게 해준다. 세션 관리자는 멀티유저와 멀티그룹을 지원하며 화이트보드, 화상회의, 공동 브라우징 시스템 등의 다양한 원격 학습 컴포넌트들이 같은 세션 정보를 가질 수 있게 하여 하나의 원격학습 시스템으로 통합될 수 있게 한다. 본 시스템은 공동 브라우징 등 여러 가지 동기적인 기능을 지원하여 원격 학습의 효율을 증진시키고, 마치 동일한 강의실에서 학습하고 있는 듯한 효과를 얻을 수 있게 해준다.

• 소성∙가공
• /
• 제13권2호
• /
• pp.122-128
• /
• 2004

In order to make a doubly-curved sheet metal effectively, a sheet metal forming process has been developed by adopting the flexibility of the incremental forming process and the principle of bending deformation which causes slight deformation in thickness. The developed process is an unconstrained forming process with no holder. For this study, the experimental equipment is set up with the roll set which consists of two pairs of support rolls and one center roll. In the experiments using aluminum sheets, it is found that the curvature of the formed sheet metal is determined by controlling the distance between supporting rolls in pairs and the forming depth of the center roll and it also depends on the thickness of the sheet metal. In order to check the effect of process parameters on the generation of sheet metal curvatures in this process, the orthogonal array is adopted. From the experimental results, among the process parameters, the distance between supporting rolls in pairs along the direction of one principal radius of curvature as well as the forming depth and the thickness of the material is shown to influence the generation of curvature in the same direction significantly. That is, the other distance between supporting rolls in pairs which are not located in the same direction of one principal radius of curvature, does not have an significant effect on the generation of the curvature in that direction. It mainly affects the generation of curvature in its own direction with the forming depth and the thickness of the material.

• Journal of the Korean Wood Science and Technology
• /
• 제48권4호
• /
• pp.562-568
• /
• 2020

This study investigates the relationship between ultrasonic velocity and density in the direct method, the effect of distance between transducers in the indirect method, and the difference between the direct and indirect methods with transducers placed at a distance of 200 mm in nondestructive ultrasonic testing of spruce lumber. The direct method using 54 kHz ultrasonic transducers was applied to two planes, namely, radial section (LR) and tangential section (LT) of samples. The indirect method measurements were taken using the same transducers. Two velocities were measured at the top and bottom of the LT plane and at the two sides of the LR plane; the two values for each plane were averaged. The relationship between density and ultrasound velocity in the direct method demonstrated a positive correlation between the two variables. The difference between the two planes, LT and LR, was not statistically significant. Moreover, the distance between the transducers in the indirect method affected ultrasound velocity, with the ultrasonic velocity increasing as the distance between the transducers became larger. A transducer distance of 200 mm yielded a close approximation of the direct method results with a ratio of 0.87. Finally, no statistical evidence of a difference between the two planes in the indirect method was found. If the direct method, which requires access to two surfaces, is impractical, the indirect method can be applied.

• 해양환경안전학회지
• /
• 제20권4호
• /
• pp.419-425
• /
• 2014

본 연구는 격자수, 첫 번째 격자까지의 거리($Y_P+$), 난류모델 그리고 이산화 방법에 따른 해의 변화량을 조사하였다. 대상선박은 KVLCC이며, 격자구성과 유동해석은 상용코드인 Gridgen V15와 FLUENT를 사용하였다. 검토는 2가지 파트로 나누어서 수행하였다. 첫 번째 파트는 격자수, 난류모델 그리고 이산화 방법의 조합에 따른 해의 영향성을 평가하였다. 두 번째 파트는 적합한 $Y_P+$ 선정에 초점을 두었다. 격자수와 이산화 방법이 동일한 경우 마찰저항은 난류모델에 따라 약 1 % 내에서 차이를 보였으나, 압력저항은 약 9 %의 큰 차이를 보였다. $Y_P+$와 이산화 방법이 동일한 경우 $Y_P+$를 30과 50으로 설정하였을 때 마찰저항은 난류모델에 따라 약 1 % 내에서 차이를 보였으나, 100에서는 약 3 % 차이를 보였다. 반면, 압력저항은 $Y_P+$값에 무관하게 난류모델에 따라 약 10 % 차이를 보였다. 난류모델과 이산화 방법이 동일한 경우 격자 수 변화 따라 마찰저항, 압력저항 그리고 전 저항 모두 큰 차이를 보이지 않았다. 난류모델과 이산화 방법이 동일한 경우 $Y_P+$의 변화에 따라 마찰저항은 5~8 %의 큰 차이를 보였고, 압력저항은 큰 차이를 보이지 않았다.