• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3235-3241
• /
• 2022

The Korea Atomic Energy Research Institute (KAERI) is planning the construction of the KIJANG Research Reactor (KJRR) for stable supply of ⁹⁹Mo. The Fission ⁹⁹Mo Production Process (FMPP) of KJRR produces solid waste such as spent uranium cake and alumina cake, and liquid waste in the form of intermediate level liquid waste (ILLW) and low level liquid waste (LLLW). This study thus established the operating range and optimum operating conditions for the cementation of ILLW from FMPP. It also evaluated whether cement waste form samples produced under optimum operational conditions satisfy the waste acceptance criteria (WAC) of a disposal facility in Korea (Korea radioactive waste agency, KORAD). Considering economic feasibility and safety, optimum operational conditions were achieved at a w/c ratio of 0.55, and the corresponding salt content was 5.71 wt%. The cement waste form samples prepared under optimum operational conditions were found to satisfy KORAD's WAC when tested for structural stability and leachability. The results indicate that the proposed cementation conditions for the disposal of ILLW from FMMP can be effectively applied to KJRR's disposal facility.

• Journal of Electrochemical Science and Technology
• /
• 제14권4호
• /
• pp.326-332
• /
• 2023

The high cost of Si-based solar cells remains a substantial challenge to their widespread adoption. To address this issue, it is essential to reduce the production cost of solar-grade Si, which is used as raw material. One approach to achieve this is Si electrodeposition in molten salts containing Si sources, such as SiO₂. In this study, we present the pulse electrodeposition of Si in molten CaCl₂ containing SiO₂ nanoparticles. Theoretically, SiO₂ nanoparticles with a diameter of less than 20 nm in molten CaCl₂ at 850℃ have a comparable diffusion coefficient with that of ions in aqueous solutions at room temperature. However, we observed a slower-than-expected diffusion of the SiO₂ nanoparticles, probably because of their tendency to aggregate in the molten CaCl₂. This led to the formation of a non-uniform Si film with low current efficiency during direct current electrodeposition. We overcome this issue using pulse electrodeposition, which enabled the facile supplementation of SiO₂ nanoparticles to the substrate. This approach produced a uniform and thick electrodeposited Si film. Our results demonstrate an efficient method for Si electrodeposition in molten CaCl₂ containing SiO₂ nanoparticles, which can contribute to a reduction in production cost of solar-grade Si.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2020년도 추계국제학술대회
• /
• pp.79-79
• /
• 2020

Halophyte is a plant that has evolved to grow well in salty places, and is mainly distributed in coastal wetlands, sand dunes, salt fields, and reclaimed lands in tidal flats and river estuaries. Because it grows in the soil where seawater enters and exits, it is very abound in natural minerals and produces certain metabolites to survive sustainably in the surrounding environment. In this study, anti-inflammatory studies were conducted using 15 kinds of halophyte to secure data on halophytes of infinite value as functional materials. The aim of this study was to select a group of halophytes that regulate iNOS expression, which is involved in the secretion of inflammatory cytokines and nitric oxide production in LPS-induced macrophages. Among the 15 species of halophyte, except for Triglochin maritimum, Suaeda japonica, and Carex pumila, NO production was reduced in 12 species of halophytes, and 7 species of halophyte (Suaeda asparagoides, Artemisia fukudo, Spergularia marina, Aster tripolium, Suaeda australis, Atriplex subcordata, Calystegia soldanella) significantly decreased the expression levels of TNF-α and IL-1β.

• Weed & Turfgrass Science
• /
• 제6권2호
• /
• pp.124-129
• /
• 2017

사료용 피 직파재배시 적정 파종량 시험에서 입모수는 파종량이 증가할수록 많았으며, 입모율은 41-42% 정도였다. 경수도 파종량이 증가할수록 많았고, 초장은 파종량이 많을수록 증가하였으나 $50kg\;ha^{-1}$에서는 감소하였다. 파종량이 많았던 $50kg\;ha^{-1}$에서 도복지수가 3이었다. 건물중은 파종량 $40kg\;ha^{-1}$에서 가장 높았고, TDN 생산량은 파종량이 적을수록 높았다. 수량반응 곡선상 $36kg\;ha^{-1}$에서 최대수량 건물수량이 추정되었다. 변화 상태의 회귀식은 $Y=0.0098X^2+0.7030X+2.6267$으로 표시되었다. 출수기는 파종량이 많을수록 늦어지는 경향이었다. 사료용 피 직파 재배시 질소질 비료 $150-250kg\;ha^{-1}$ 시비에서 건초 수량의 차이는 없었으나, 무시용 대비 건초 수량은 200 및 $250kg\;ha^{-1}$ 시비에서 16.6톤 $ha^{-1}$ 및 16.9톤 $ha^{-1}$로 43% 및 45% 정도 높았다. 조단백질 수량(CP)은 건물수량과 비슷한 경향으로 무질소구에서 0.28톤 $ha^{-1}$이었던 것이 질소 $250kg\;ha^{-1}$ 시비구에서 0.54톤 $ha^{-1}$ 이었다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.378-381
• /
• 2000

The optimal conditions and properties for the immobilization of marine bacterium Pseudomonas aeruginosa BYK-2 have been determined. For the high productioon of biosurfactant, Na-alginate, PVA, modified PVA were used as a carrier. The optimal emulsifying activity on immobilized Pseudomonas aeruginosa BYK-2 showed 1036Unit (about 2.2g/L biosurfactant) in Basal salt medium(B.S.M.) at $25^{\circ}C$, 100rpm. Ca-alginate was selected the optimal bead among PVA, modified PVA and Ca-alginate. The optimal cell load in alginate bead was 10 gCWW/100g carrier. As the results of incubation of immobilized 5g Ca-alginate bead (conditions; 3% alginate, bead diameter: 2.3mm, 10% cell load) in 50m1 production medium, The emulsifying activity of 1407Unit, about 3.0g/L biosurfactant was obtained from immobilized cell after cultivation of 92hr at $25^{\circ}C$, 100rpm.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.281-286
• /
• 2001

The development of automobile, vessel, rail road, and machine industry leads increase of foundry production used as their components, which cause a by-product, waste foundry sand (WFS). The amount of the WFS produced in Korea is over 900,000 ton a year, but most WFS buries itself and only 5~6% WFS is recycled as a material in construction materials. In this study, WFS is used as a fine aggregate for concrete. Five types of concretes aimed at the specified strength of 240$\pm$10 kgf/$cm^{2}$ , air contents of 4.5$\pm$1% and slump of 12$\pm$1.5cm were mixed with washed coarse seashore sand(WFS) in which salt was removed and then optimum mix proportion of concrete was determined. Moreover, basic properties such as setting time, workability, bleeding and slump loss of the fresh concrete with WFS were tested and compared with those of the concrete mixed without WFS. In .addition, both compressive strength of hardened concrete at each ages and tensile strength of it at the age of 28 days were measured and discussed.

• 한국식품영양과학회지
• /
• 제20권1호
• /
• pp.21-26
• /
• 1991

the Bacillus subtilis LY-353 which secretes the protease isolated from seafoods. The opti-mum culture condition for production of protease from B. subtilis LY-353 was as follows ; tem-perature 35$^{\circ}C$ pH 7.5 salt concentration 1.0% The purification steps involved ammonium sulfate fractionation DEAE-Sephadex A-50 column chromatography and Sephadex G-100 gel filtration A 7.33 fold purification and 6.55 yield of protease was obtained from culture broth, The optimum pH and temperature for the enzyme action were pH7.5 and 55$^{\circ}C$ respecti-bely.

• 대한안전경영과학회지
• /
• 제2권4호
• /
• pp.197-208
• /
• 2000

ABS sensor ring has been manufactured by powder metallurgy (P/M) method using 400 series ferrite stainless steel. The results are following. It is supposedly sufficient to use for control computer due to good experimental results of magnetic characteristics. Compared with sensor ring made by iron, 400 series ferrite stainless steel has shown a good corrosion resistance without an addition surface treatment. Thus the decreasing production process has been obtained. As a result mechanical characteristics of hardness and tensile test, 400 series ferrite stainless steel shown a good endurance when it is combined to constant velocity joint(C/V), and has a good hardness properties endurable to sand and pebble impact. The products before sintering are much more corrodible in the condition of spray test of salt water and ammonia than humidity and nitrogen condition.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1796-1803
• /
• 2015

While considering the current scenario, in this world power demand goes on increases day by day. Frequent power outages occur in high voltage transmission line due to the deprived performance of polluted insulators; this affects overall operation of power system and may indirectly impinge on the growth of production sector. Many researchers are keenly taking efforts to provide highly reliable and stable power to neediest. In this paper, A.C pollution flashover performance of disc type glass insulator and composite long rod insulators investigation under various artificial pollutions by varying Equivalent Salt Density Deposition (ESDD) levels. Here, we use different types of pollution methods like binding method, dipping method and spraying methods with different types of pollutants concentration. Based on dimensional analysis, four different Mathematical models have been developed to predict the A.C pollution Flashover Voltage (FOV) of insulators. Both the experimental and mathematically modeled results are compared; it's observed that mathematical model 3 yields better results.

• 한국유가공학회:학술대회논문집
• /
• 한국유가공기술과학회 2002년도 제54회 춘계심포지움 - 우유와 국민건강
• /
• pp.45-55
• /
• 2002

Recent developments in the application of molecular biology to food grade lactic acid bacteria (LAB) have shown that it could be feasible to engineer metabolic pathways to either enhance specific metabolic fluxes or to divert metabolites for the production of different or new end products. This engineering requires detailed knowledge of enzymes involved in metabolism and regulation within the targeted organism but little works have been done in this area. During biochemical and molecular characterisation of lactic bacterial enzymes, some of probiotic Lactobacillus and Bifidobacterium species were found to be very useful for food, nutraceutical and pharmaceutical industries. The enzymes are usually intracellular and the yields are very low to be useful for industrial applications. Among many enzymes and proteins of lactic bacteria studied, some of our gene cloning achievements have contributed to overproduction of lactic bacterial enzymes such as peptidases, esterases, lactases, bile salt hydrolases and linoleate isomerases for foods and nutraceuticals.