• Journal of Advanced Marine Engineering and Technology
• /
• 제40권2호
• /
• pp.107-111
• /
• 2016

This paper presents electrochemical corrosion behaviors of cement mortar specimens in the high salinity condition. Chloride ion is known as the most detrimental parameter to cause the corrosion in reinforced concrete. Increasing the concrete cover thickness is one of the corrosion protection methods against chloride ion; so, this study mainly focuses on the effects of mortar cover thickness on corrosion protection. In specimens, rebar, which was a height of 200 mm and a diameter of 10 mm, was installed at the center of the small size form. Later on, mortar was injected into the form, and 10, 20, 30, 40, and 50 mm of the different mortar cover thicknesses were selected. Potential measurements, linear polarization resistance tests, and cyclic potentiodynamic polarization tests were performed for specimens that were exposed to seawater. These results were compared with visual inspection results of rebar. The results show that an increase in the cover thickness contributes to corrosion protection. In addition, the result of electrochemical corrosion tests generally agreed with that of an autopsy visual inspection.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2006년도 총회 및 춘계학술발표회
• /
• pp.293-297
• /
• 2006

Submarine groundwater discharge (SGD) and the interface between seawater and freshwater in an unconfined coastal aquifer was evaluated by numerical modeling. A two-dimensional vertical cross section of the aquifer was constructed. Coupled flow and salinity transport modeling were peformed by using a numerical code FEFLOW In this study, we investigated the changes in groundwater flow and salinity transport in coastal aquifer with hydraulic condition such as the magnitude of recharge flux, hydraulic conductivity. Especially, transient simulation considering tidal effect and seasonal change of recharge rate was simulated to compare the difference between quasi-steady state and transient state. Results show that SGD flux is in proportion to the recharge rate and hydraulic conductivity, and the interface between the seawater and the freshwater shows somewhat retreat toward the seaside as recharge flux increases. Considered tidal effect, SGD flux and flow directions are affected by continuous change of the sea level and the interface shows more dispersed pattern affected by velocity variation. The cases which represent variable daily recharge rate instead of annual average value also shows remarkably different result from the quasi-steady case, implying the importance of transient state simulation.

• 대한조선학회논문집
• /
• 제40권3호
• /
• pp.54-60
• /
• 2003

Fatigue strength of offshore structures or ship structures is significantly decreased due to corrosive environment condition such as sea water and/or coal, crude oil of cargoes, compared to that of on shore structures. In corrosive environment, fatigue strength of structures also depends on characteristics of weld material heat affected zone(HAZ). In this research work, rotary bending fatigue tests of parent material and HAZ of TMCP steel were performed in order to investigate the initiation and propagation of cracks both in air and in NaCl solution. Comparison of fatigue strength In relation with the salinity of NaCl were carried out as well. According to the test results weld material or HAZ of TMCP steel showed higher fatigue strength than that of the parent material. The fatigue strength of TMCP steel decreases drastically in NaCl solution compared to that of in air environment. In particular, more reduced fatigue strength is observed in 1% NaCl solution than in 3% NaCl solution.

• 한국수산과학회지
• /
• 제31권2호
• /
• pp.176-185
• /
• 1998

서식 환경 조사 결과 수온은 1992년에는 웅촌이, 1993 년에는 송도가 높았으며, 염분은 1992년 1월에서 5월을 제외하고는 송도 양식장이 더 높았다. 부유물질과 chlorophyll a 함량 및 저질내 COD는 송도가 높았고, DO, DIP, DIN 및 저질내 총황화물은 웅촌이 높았다. 피조개의 성장과 생리 상태를 분석한 결과, 성장, 연체부지수, 체내 글리코겐 함량과 헤모글로빈 함량 모두 송도의 피조개가 높은 수치를 나타내었다. 또한 송도의 피조개가 생식소 발달도 빨랐다. 본 시험에서 피조개 성장과 생리상태에 영향을 미치는 가장 큰 환경 요인은 먹이생물의 양과 저질의 총황화물량으로 추정되었다.

• Environmental Engineering Research
• /
• 제21권2호
• /
• pp.196-202
• /
• 2016

Membrane bioreactor (MBR) technology has previously been used by water industry to treat high salinity wastewater. In this study, an anoxic-oxic biofilm-membrane bioreactor (AOB-MBR) system has been developed to treat mustard tuber wastewater of 10% salinity (calculated as NaCl). To figure out the effects of operating conditions of the AOB-MBR on membrane fouling rate ($K_V$), response surface methodology was used to evaluate the interaction effect of the three key operational parameters, namely time interval for pump (t), aeration intensity ($U_{Gr}$) and transmembrane pressure (TMP). The optimal condition for lowest membrane fouling rate ($K_V$) was obtained: time interval was 4.0 min, aeration intensity was $14.6 m^3/(m^2{\cdot}h)$ and transmembrane pressure was 19.0 kPa. And under this condition, the treatment efficiency with different influent loads, i.e. 1.0, 1.9 and $3.3kgCODm^{-3}d^{-1}$ was researched. When the reactor influent load was less than $1.9kgCODm^{-3}d^{-1}$, the effluent could meet the third discharge standard of "Integrated Wastewater Discharge Standard". This study suggests that the model fitted by response surface methodology can predict accurately membrane fouling rate within the specified design space. And it is feasible to apply the AOB-MBR in the pickled mustard tuber factory, achieving satisfying effluent quality.

• 한국환경농학회지
• /
• 제20권5호
• /
• pp.317-324
• /
• 2001

Short-term effect of phosphogypsum on soil properties including acidification, salinity and metal availability were investigated under laboratory and field conditions. Phosphogypsum and mixtures of phosphogypsum and compost were added to soil and incubated in a laboratory condition with 15% moisture content. Phosphogypsum treatments were 2.5 and 5.0 g/kg soil and in the treatments of phosphogypsum and compost mixture 10 g of compost was added additionally. After the 30 days of incubation, an additional phosphogypsum and/or compost were added to the remaining soils at the same rates of the first treatments. pH, electrical conductivity, and available hazardous elements were measured periodically during the incubation. Field experiment was conducted in a plastic film house of mellon with four treatments of phosphogypsum and compost mixtures - 25+125, 50+125, 50+250 and 100+250 kg/165 $m^2$. pH, electrical conductivity, and hazardous elements in soil and total hazardous elements in leaf were measured. In the laboratory experiment, after 30 days of the first phosphogypsum application, soil pHs were lowered by 0.7-0.8 units. After the second treatment of phosphogypsum 0.2 units of additional acidification occurred. However, acidification was not observed in the soils treated with mixtures of phosphogypsum and compost. In the laboratory experiment, phosphogypsum treatments increased electrical conductivity very significantly. In field experiment, pH and electrical conductivity of soils treated with phosphogypsum were nearly the same as those of soil not treated with phosphogypsum. Since soil condition in the field study was an open system, the free acids and salts derived from phosphogypsum could be diffused down with water leaching through the soil profile and then any significant acidification or salt accumulation in the topsoil could not be observed. In both laboratory and field experiments, levels of available hazardous elements in soils treated with phosphogypsum were quite low and not different from the levels found in the control soil. Results obtained from this study suggest that application of phosphogypsum at appropriate rates on agricultural land appears of no concern in terms of acidity, salinity and hazardous element content of soil.

• 한국토양비료학회지
• /
• 제48권3호
• /
• pp.170-179
• /
• 2015

This study was carried out to investigate the sustainable agriculture of no-tillage technique to minimize tillage problems under rain interception green house condition including recycling of the ridge and the furrow for following cultivation in Korea. Chemical properties in soils were investigated at 3-years after cultivation at conventional tillage [CT; 2-years no-tillage (2009-2010) and 1-year (2011) tillage] and no-tillage [NT; 2009-2011] field. Soil pH maintained between 5.8 and 6.0 irrespectively tillage and no-tillage. Salinity (EC), contents of total nitrogen (TN), cation exchange capacity (CEC), and exchangeable cations (K, Ca and Mg) in soil were remarkably higher in CT than in NT treatment. Salinity (EC), contents of OM, TN, CEC, and exchangeable cations in top soil and subsoil indicated higher deviation in CT than NT treatment. Organic matters and inorganic matters in soil were positive (+) correlation. Suppression of pepper growth and increase of yield were observed in no-tillage soil compared with tillage soil. These results indicated that no-tillage technique in crop culture could play an important role with respect to chemical properties in silt loam soil.

• 한국수산과학회지
• /
• 제27권2호
• /
• pp.200-214
• /
• 1994

진해만의 저서동물 군집생태 연구의 일환으로 저서환경의 특성을 구명하기 위하여, 1987년 6월부터 1990년 5월까지 12개 정점에서 표층 및 저층수의 수온, 염분, 용존산소와 퇴적물의 입도조성 및 유기물량을 조사하였다. 진해만의 저서환경은 내만으로 들어 갈수록 퇴적물 입도의 세립화, 높은 유기물함량, 여름철 성층의 발달로 인한 저층 빈산소 수괴의 형성 등이 특징적으로 나타났다. 저층의 빈산소수괴는 5월부터 내만에서 형성되기 시작하여, 여름철로 접어들면서 점차 외해역으로 확산되어 9월에 최고에 달하였으며, 진해만 전 해역의 절반이상이 빈산소 영향을 받고 있는 것으로 나타났다. 이러한 저층의 빈산소 환경은 가을철로 접어들면서 성층의 점진적 소멸과 함께 회복된다. 저층수의 수온, 염분 및 용존 산소량과 퇴적물의 입도 및 유기물 함량의 5개 환경요인에 대하여 주성분 분석을 실시한 결과 4개 해역으로 나눌 수 있었으며, 이러한 공간 분포는 전반적으로 퇴적물의 유기물함량과 가장 높은 상관관계를 가지는 것으로 나타났다.

• 동아시아식생활학회지
• /
• 제14권6호
• /
• pp.608-617
• /
• 2004

This study is conducted to find out the appropriate preparing method and fermenting condition through analysis of physicochemical, microbiological, sensory evaluation of Myungtae sikhae, Korean fermented fishery food which was prepared in simplified and conventional methods. During the fermentation of sikhae at 4℃, pH was decreased gradually, but acidity was increased and salinity was steady state. In this aspect, no significant difference was revealed between sikhae prepared in simplified and conventional methods. Under fermentation at 20℃ and kept at 4℃, pH was decreased to 4.6～4.9 for 15～20 days fermentation with steady state of salinity. However, acidity was changed in conversely. The content of reducing sugar with rapidly decreasing in the beginning of fermentation was continually decreased. The propagation of microorganism in th sikhae depends on the fermentation temperature rather than the preparing methods. Generally low propagation of microorganism began to increase gradually in the sikhae fermented at 4℃ comparing to that fermented at 20℃. In the sikhae fermented at 20℃ and kept at 4℃, the total count including lactic acid bacteria, was rapidly increased after 5 days' fermentation of sikhae is dominated by Lactobacillus sp. and the unique flavor and organic acid were contributed by this flora with Leuconostoc. sp. By the sensory evaluation, the best flavor was revealed in the sikhae, prepared in simplified method fermented for 30 days at 4℃. Until 20 days, sikhae fermented at 20℃ revealed higher score than fermented at 4℃. General preference for the sikhae fermented at 4℃ for 15 days prepared by simplified method and those fermented at 20℃ for 10 days. The sikhae, fermented at 4℃, showed less difference between preparing methods and preferable acceptability after being 25 days. The best acceptability of sikhae fermented at 20℃ showed after 15～25 days. In the final conclusion, the appropriate preparing method of sikhae is to use frozen Alaska pollack with simplified method and fermented at 20℃ for 5 days and then kept at 4℃.

• 한국지반공학회논문집
• /
• 제28권12호
• /
• pp.87-98
• /
• 2012

현장타설말뚝의 시공현장에서 소켓 벽면의 거칠기를 측정할 수 있는 거칠기 측정장치의 소나센서부를 개발하였으며 검증시험을 실시하였다. 모형 검증시험에서는 현장 굴착공내수 조건을 모사하여 염도, 온도, 혼탁도를 변화시켰다. 시험 결과를 통해 센서의 정밀도는 1mm임을 확인할 수 있었고 소나센서의 파형 특성상 경사면과 곡면의 측정값이 일부 분산되는 경우가 있었지만 시험에 사용된 모형의 형상은 비교적 정확하게 확인할 수 있었다. 또한 소나센서의 측정값은 염도, 온도, 혼탁도의 변화에 의한 영향을 받지 않음을 알 수 있었다.