참고문헌
- Cho, C. W., Lee, M. W., Kim, S. H., Lee, H. J., and Yoo, H. K. (2003), "CNS Shear Tests for Granite-Concrete interface of drilled shaft", KGS Spring Conference 2003, KGS, pp.147-152.
- Collingwood, B. (2000), "The Effects of Construction Practices on the Performance of Rock Socket Bored Piles", Ph. D. Thesis, Department of Civil Engineering, Monash University, Clayton, Vic., Australia.
- Horvath, R. G., Kennet, T. C., and Kozick, P. I. (1983), "Methods of Improving the Performance of Drilled Piers in Weak Rock", Canadian Geotechnical Journal, Vol.20, pp.758-772. https://doi.org/10.1139/t83-081
- KICT (2012), "Super Long Span Bridge R&D Center, 3rd Core, 3rd Subject : High efficiency construction technology development, 1st Step Report", KICTEP, Report No. 2008 Technology Innovation-B01, pp.115-116.
- Kim, S. I., Jeong, S. S., Cho, S. H., and Park, I. J. (1999), "Shear Load Transfer Characteristics of Drilled Shafts in Weathered Rocks", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, pp.999-1010.
- Koden Electronics Co., Ltd. (2009), "DM-602/604 Ultrasonic Drilling Monitor", www.koden-electronics.co.jp
- Kulhawy, F. H. and Phoon, K. K. (1993), "Drilled Shaft Side Resistance in Clay Soil to Rock", Design and Performance of Deep Foundation, GSP No. 38, Ed. by P. P. Nelson, T. D. Smith and E. C. Clukey, ASCE, October, pp.172-183.
- Nam, M. S. (2004), "Improved Design for Drilled Shafts in Rock", Ph D. Thesis, Department of Civil and Environmental Engineering, University of Houston, Texas.
- Park, B. G. (2007), "Resarch on Development and Calibration of BKS-LRPS(Backyoung-KyungSung Laser Roughness Profiling System)", Ph.D. Thesis, Kyungsung University pp.199-203.
- Piletech Co. Ltd. (2004), "A New Improved Design Method for Drilled Shafts in Rock", KICTEP, Report No. 2001-Object A-11, pp.208-210.
- Seidel, J. P. and Collingwood B. (2001), "A New Socket Roughness Factor for Prediction of Rock Socket Shaft Resistance", Canadian Geotechnical Journal, Vol. February pp138-153.
- Seol, H. I., Jeong, S. S., and Woo, S. Y. (2006), "Load Transfer Characteristics of Rock-Socketed Drilled Shafts Considering Hole Roughness", KGS Spring Conference 2006, KGS, pp.494-505.