Maintenance plays a critical role in the bridge industry, but actual practices show many limitations because of traditional, 2D-based information systems. It is necessary to develop a new generation of maintenance information management systems for more reliable decision making in bridge maintenance. Enhancing current work processes requires a BIM-based 3D digital model that can use information from the whole lifecycle of a project (design, construction, operation, and maintenance) through continuous exchanges and updates from each stakeholder. This study describes the development of a data scheme for maintenance of cable-stayed bridges. We implemented the proposed system for a cable-stayed bridge and discussed its effectiveness.
Foodservice industry serves enormous volumes of food each day, yet they rely on what might be the most poorly educated, most transient, and youngest work force in the whole food industry. These individuals handle every meal or item which is served. It is a situation ripe for problems, problems which are all too real. HACCP system is a preventive approach stages where loss of control could present a food safety risk in a food service operation. But it is very difficult to using HACCP Plan. The objective of this study was to develop a HACCP Plan using Six Sigma Methodology. This new HACCP Model from this study will be left to the each operation to develop for themselves. This means that foodservice industry operations should modify new HACCP Model provided in this study to establish their own HACCP system for use in their own operations.
Korbu, Tamara;Kuzmin, Andrei;Rudak, Eduard;Kravchenko, Maksim
Nuclear Engineering and Technology
/
제53권6호
/
pp.1731-1735
/
2021
The operation of the nuclear reactor requires accurate and fast methods and techniques for analysing its kinetics. These techniques become even more important when the MOX-fuel is used due to the lower value of delayed neutron fraction 𝛽 for 239Pu. Based on a Birth-and-Death process review, the mathematical model of thermal reactor core has been proposed different from existing ones. The analytical method for thermal point-reactor parameters evaluation is described within this work. The proposed method is applied for analysis of the unsteady transient processes taking place in a thermal reactor at its start-up or shutdown power change, as well as during small accidental power variation from the rated value. Theoretical determination of MASURCA reactor core reactivity through the analysis of experimental data on neutron time spectra was made.
Kim, Soojin;Kim, Yangwook;Lim, Sung-Shil;Ryoo, Jae-Hong;Yoon, Jin-Ha
Safety and Health at Work
/
제10권4호
/
pp.470-475
/
2019
Background: There is a lack of statistical analysis investigating the relationship between sleep problems and commute time in Korea. We aimed to analyze the association between representative health symptoms, sleep disturbances, and commute time according to working hours in Korea. Methods: The 4th Korean Working Conditions Survey data were used for analysis, and unpaid family workers and workers who work fewer than three days in a week were excluded. Commute time, working hours, and sleep hours were assessed using self-reported questionnaires. Odds ratios (ORs) with 95% confidence intervals (CIs) for sleep problems were calculated using a multivariate logistic regression model with ≤10 min commute time as the reference group. Results: Among a total of 28,804 workers (men = 14,945, women = 13,859), 2.6% of men and 3.2% of women experienced sleep problems. In both sexes, long commute time (51-60 minutes and >60 minutes) showed an increased OR [men, 2.03 (CI = 1.32-3.13) and 2.05 (CI = 1.33-3.17); women, 1.58 (CI = 1.05-2.39) and 1.63 (CI = 1.06-2.50), respectively]. In stratification analysis of working hours, long commute time (51-60 and > 60 minutes) showed an increased OR in men working >40 hours/week [2.08 (CI = 1.16-3.71) and 1.92 (CI = 1.08-3.41), respectively]. Furthermore, long commute time (41-50, 51-60, and >60 minutes) showed an increased OR in women working >40 hours/week [2.40 (CI = 1.27-4.55), 2.28 (CI = 1.25-4.16), and 2.19 (CI = 1.17-4.16), respectively]. Moreover, commute time >60 minutes showed an increased OR in women working ≤40 hours/week [1.96 (CI = 1.06-3.62)]. Conclusion: This large cross-sectional study highlights that long commute time is related to sleep problems in both sexes. Shorter commute times and decreased working hours are needed to prevent sleep problems in workers.
Purpose: This study aimed to identify the predictors of blood and body fluid exposure (BBFE) in multifaceted individual (sleep disturbance and fatigue), occupational (occupational stress), and organizational (hospital safety climate) factors, as well as infection prevention behavior. We also aimed to test the mediating effect of infection prevention behavior in relation to multifaceted factors and the frequency of BBFE. Methods: This study was based on a secondary data analysis, using data of 246 nurses from the Shift Work Nurses' Health and Turnover study. Based on the characteristics of zero-inflated and over-dispersed count data of frequencies of BBFE, the data were analyzed to calculate zero-inflated negative binomial regression within a generalized linear model and to test the mediating effect using SPSS 25.0, Stata 14.1, and PROCESS macro. Results: We found that the frequency of BBFE increased in subjects with disturbed sleep (IRR = 1.87, p = .049), and the probability of non-BBFE increased in subjects showing higher infection prevention behavior (IRR = 15.05, p = .006) and a hospital safety climate (IRR = 28.46, p = .018). We also found that infection prevention behavior had mediating effects on the occupational stress-BBFE and hospital safety climate-BBFE relationships. Conclusion: Sleep disturbance is an important risk factor related to frequency of BBFE, whereas preventive factors are infection prevention behavior and hospital safety climate. We suggest individual and systemic efforts to improve sleep, occupational stress, and hospital safety climate to prevent BBFE occurrence.
When an accident occurs, the associated human activity is typically regarded as a "human error," or a temporal deviation. On the other hand, if the accident results in a serious loss or if it evokes a social issue, the person determined to be responsible may be punished with a "violation" of related laws or regulations. However, as Heinrich stated, it is neither appropriate nor reasonable in terms of probability theory and cognitive science to distinguish whether it is a "human error" or a "violation" with a criterion of resultant accident severity. Nonetheless, some in society get on the social climate to strengthen regulations on workers who have caused accidents, especially violations. This response can present a social issue due to the lack of systematic judgment procedure which distinguishes violations from human errors. The purpose of this study was to develop an objective and systematic procedure to assess whether workers' activities which induced industrial accidents should be categorized as violations rather than human errors. Various analysis techniques for the determination of violation procedure were investigated and compared using an analysis approach method. An appropriate technique was not found, however, for judging the culpability of intentional violations. As an alternative, this study developed the process of creating violations, based on cognitive procedure, as well as the criteria to determine and categorize an activity as a violation. In addition, the developed procedure was applied to cases of industrial accidents and nuclear power plant issues to test its practical applicability. The study demonstrated that the proposed model could be used to determine the existence of a violation even in the case of multiple workers who work simultaneously.
Aliabadi, Mostafa Mirzaei;Mohammadfam, Iraj;Soltanian, Ali Reza;Najafi, Kamran
Safety and Health at Work
/
제13권3호
/
pp.326-335
/
2022
Background: One of the important actions for enhancing human reliability in any industry is assessing human error probability (HEP). The HEART technique is a robust tool for calculating HEP in various industries. The traditional HEART has some weaknesses due to expert judgment. For these reasons, a hybrid model is presented in this study to integrate HEART with Best-Worst Method. Materials Method: In this study, the blasting process in an iron ore mine was investigated as a case study. The proposed HEART-BWM was used to increase the sensitivity of APOA calculation. Then the HEP was calculated using conventional HEART formula. A consistency ratio was calculated using BWM. Finally, for verification of the HEART-BWM, HEP calculation was done by traditional HEART and HEART-BWM. Results: In the view of determined HEPs, the results showed that the mean of HEP in the blasting of the iron ore process was 2.57E-01. Checking the full blast of all the holes after the blasting sub-task was the most dangerous task due to the highest HEP value, and it was found 9.646E-01. On the other side, obtaining a permit to receive and transport materials was the most reliable task, and the HEP was 8.54E-04. Conclusion: The results showed a good consistency for the proposed technique. Comparing the two techniques confirmed that the BWM makes the traditional HEART faster and more reliable by performing the basic comparisons.
Objectives: This study aims to develop an Occupational Safety and Health (OSH) guide for the safe cleaning of contaminated machinery, equipment, and parts used in the electronics manufacturing process. Methods: A literature review, field investigations, and discussions were conducted. An initial draft of an OSH guide was developed and reviewed by experts with significant experience in maintenance work in the electronics manufacturing process in order to refine the guide. Results: Workers involved in cleaning processes with chemicals, solvents, and abrasive blasting can face exposure to a wide range of chemicals, abrasives, and noise. Identifying potential risks associated with each cleaning technique was an essential first step toward enhancing safety measures. The OSH guide comprises approximately eleven to twelve sections spanning 20-25 pages. It includes engineering and administrative protocols systematically organized to address the necessary actions before, during, and after cleaning tasks, depending on the technique. It is recommended that airline respirator masks be used in conjunction with an air purification system to ensure adherence to air quality standard "D" for atmosphere level. The use of an oil-free air compressor is advised, preferably a stationary model that does not rely on fuel sources like diesel. Conclusions: This OSH guide is designed to protect workers involved in maintenance activity in the electronics industry and aligns with global standards, such as those from the International Organization for Standardization (ISO) and Semiconductor Equipment and Material International, ensuring a higher level of safety and compliance.
건설 자동화 장비 개발의 성공여부를 판단하고 이를 실용화하기 위해서는 개발 장비의 성능평가 및 분석을 통해 재래식방식과 비교하여 자동화 방식을 도입함으로써 얻을 수 있는 기대효과에 대한 검증이 이루어져야 한다. 본 연구에서는 최근 국내에서 개발된 흄관매설 자동화 장비의 성능분석을 위한 평가모델 및 방법론을 구축하고 수차례의 현장실험(field trials)을 통해 수집된 실험 데이터를 바탕으로 재래식 흄관매설 방식과 자동화 방식의 성능을 종합적으로 비교$\cdot$분석함으로써 재래식 방식에 비해 자동화 방식의 도입을 통해 얻을 수 있는 정성적 $\cdot$정량적 기대효과를 제시하였다. 흄관매설 자동화 장비의 성능분석을 위해 본 연구에서 제시한 성능평가 모델 및 방법론은 향후 건설자동화 관련 기술개발 시 자동화 장비의 성능평가 및 분석 모델을 개발함에 있어 기본적 틀(framework)을 제공할 수 있을 것으로 기대된다.
Rubber parts are widely used in many applications such as dampers, shock absorbers, and seals used in railway and automotive industries. Much research has thus far been conducted on property estimation and life prediction of rubber parts. To predict the service life of rubber parts at room temperature, most prior work adopts the well-known Arrhenius model that needs the accelerated life test in high-temperature conditions. However, they may not reflect the actual conditions of use that rubber parts are usually used under a specific strain condition during long period of time. In this context, we propose a method for the life prediction of rubber parts in actual conditions of use. The proposed method is based on the accelerated life test using stress relaxation during which three relatively high elongation percentages (100%, 200%, and 300%) are applied to the rubber specimens. Rubber specimens were prepared in accordance with KS M 6518 standard and three stress relaxation testers were fabricated for actual experiments. Finally, a inverse power model for life prediction was derived from experimental results. The predicted life was compared with the actual test life for validation.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.