• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.3
• /
• pp.419-425
• /
• 2020

There are many accident risks in logging operation of forestry such as struck by felled trees and caught in, under, or between felled trees. These accidents are primarily occurred by not keeping a safe distance between workers. According to the forestry safety instruction, workers are not supposed to go into the safety zone which is a circle with a radius of more 2 times the height of felling tree. However, this rule does not keep because of poor safety consciousness, poor sight and extreme noise of logging operation machines. This problem causes many major accidents every year. To solve this problem, we made forestry safety helmets based on IoT technology. These helmets have functions to make a visual and an acoustic alarm signal when reach the distance between workers within 20 meters. We developed the algorithm to operate the helmet's functions and conducted tests to check the functions. As a result of tests, we assured the normal system operating conditions.

• Journal of the Korean Society of Food Culture
• /
• v.16 no.4
• /
• pp.296-309
• /
• 2001

This study was conducted to investigate the consumers' recognition and information need for food safety, especially focused on pesticide residues, foodborne illness, and food additives. The data were collected from 350 adults living in Taegu and Pusan by the self-administered questionnaire. Frequencies and chi-square tests were conducted by SPSS. The results of the survey were as follows: (1) the consumers' concerns about food safety were high, (2) many respondents worried about eating vegetables, fruits and grains in turn because of pesticide residues, and did not trust the results from food-safety tests, (3) the major factor for foodborne illness was regarded as unfreshed or contaminated food stuffs, (4) many consumers concerned highly about preservatives among food additives, and tried to consume food containing less food additives, and (5) many respondents wanted to get the information about harmfulness of pesticide residues in foods, method to choose fresh food, and safety of food additives.

• Journal of Auto-vehicle Safety Association
• /
• v.9 no.2
• /
• pp.20-25
• /
• 2017

KNCAP is a program to evaluate the automobile safety, providing consumer vehicle safety assessment results. The safety evaluation tests are Frontal Impact, Offset Frontal Crash, Side Crash, Side Pole Crash, Rear Impact. This is the study of the offset frontal impact safety evaluation. Currently, IIHS is performing a small overlap test. NHTSA plans to implement the oblique moving deformable barrier test. Euro-NCAP plans to implement a mobile frontal impact test. Simulation is used to compare occupant behavior and injury. We have investigated whether the introduction of the test at KNCAP is necessary. The dummy model used in the simulation was the 50th percentile male Hybrid III dummy.

• Korean Journal of Veterinary Service
• /
• v.35 no.2
• /
• pp.159-163
• /
• 2012

A 4-year-old female Cocker spaniel weighing 7.74 kg was presented with a seven-month history of lethargy and skin problems. On the basis of clinical history, physical examination, laboratory tests, electrocardiogram, radiography, ultrasonography, and thyroid function tests, the dog was diagnosed as hypothyroidism. The dog was administered levothyroxine and presented a good response to the therapy. However, uncontrolled for about 6 months, the dog was re-admitted to hospital with depression and three seizure episodes. The dog was diagnosed as hypothyroidism with concurrent myxedema coma and gallbladder mucocele. With fluid therapy and administration of levothyroxine, the dog was successfully controlled for 3 months after starting treatment. This report describes the clinical features and successful treatment of a Cocker spaniel dog with concurrent hypothyroidism and myxedema coma.

• Biomolecules & Therapeutics
• /
• v.10 no.4
• /
• pp.246-252
• /
• 2002

In recent years, the safety of sunscreens has been challenged based on the reports of their adverse effect on users; dermatitis, allergic contact dermatitis and photo allergic contact dermatitis. The unscientific idea that higher SPF sunsreen is good for health mealeads many users to tend to prefer higher SPF sunscreen. In the toxicological aspect, the need to investigate the safety of sunscreens is steadily increasing. However, there were few studies on the correlation between sun protection factor (SPF) and the safety of sunscreens. The objective of this study was to assess whether there was a correlation between SPF and the safety of sunscreens. We measured in vitro SPF index using homosalate as a standard and examined the toxicity tests such as primary skin irritation tests, ocular irritation test and skin sensitization test. Homosalate (HS), octyl methoxycinnamate (OMC), octyl salicylate (OS), octocrylene (OC) as UVB organic filter and benzophenone-3 (BP3), butyl methoxy dibenzoil methane (BMDM) as UVA organic filter, and titanium dioxide (TD), zinc oxide (ZO) as inorganic filters were used. The skin irritation indexes in rabbits treated with HS, OMC, OS, BP3, and BMDM were significantly increased as SPF indices were increased. Neither ocular irritation in rabbits nor skin sensitization in guinea pigs were increased. It suggests that there might be a good correlation between SPF and the skin irritation indices of organic UV filters and skin irritation might be one of most sensitive index to assess the safety of sunscreens.

• Geomechanics and Engineering
• /
• v.24 no.5
• /
• pp.457-470
• /
• 2021

In this study, the pull-out behavior of a tunnel-type anchorage for suspension bridges was investigated using experimental tests and image processing analyses. The study focused on evaluating the initial failure behavior and failure mode of the tunnel-type anchorage. In order to evaluate the failure mode of tunnel-type anchorage, a series of scaled model tests were conducted based on the prototype anchorage of the Ulsan Grand Bridge. In the model tests, the anchorage body and surrounding rocks were fabricated using a gypsum mixture. The pull-out behavior was investigated under plane strain conditions. The results of the model tests demonstrate that the tunnel-type anchorage underwent a wedge-shaped failure. In addition, the failure mode changed according to the differences in the physical properties of the surrounding rock and the anchorage body and the size of the anchor plate. The size of the anchor plate was found to be an important parameter that determines the failure mode. However, the difference in physical properties between the surrounding rock and the anchorage body did not affect its size. In addition, this study analyzed the initial failure behavior of the tunnel-type anchorage through image analysis and confirmed that the failure was sequentially transferred from the inside of the tunnel to the surrounding rock according to the image analysis. The reasonable failure mode for the design of the tunnel-type anchorage should be wedge-type rather than pull-out type.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.6
• /
• pp.1451-1459
• /
• 1995

The objective of this paper is to evaluate the material properties of SA312 TP316 and SA312 TP304 stainless steels and their associated welds manufactured for safety injection system of Yonggwang 3,4 nuclear generating stations. A total of 62 tensile tests and 46 fracture toughness tests were conducted and the effects of various parameters such as pipe size, crack plane orientation, tests were conducted and the effects of various parameters such as pipe size, crack plane orientation, test temperature, welding on material properties were discussed. Test results show that the effect of test temperature on fracture toughness was significant while the effects of pipe size and crack plane orientation on fracture toughness were negligible. Fracture toughness of the weld metal was in general higher than that of the base metal.

• Journal of the Korean Society of Safety
• /
• v.14 no.2
• /
• pp.116-121
• /
• 1999

When plate anchors are embedded in soft clay, they may undergo a deformation under the pressure of sustained load. The critical depth at which the transition from a shallow to a deep anchor takes place depends on the properties of soil. Laboratory model tests were performed for the short-term net ultimate uplift capacity of a circular anchors with respect to various embedment depths and moisture content in saturated kaolinite. The tests have been conducted with the anchor at two different moisture contents. Based on the model test results, empirical relationships between the net load, rate of strain, and time have been developed. In creep tests of kaolinite for load versus ultimate uplift capacity, the displacement of plate anchors rapidly increases during the primary stage but thereafter becomes constant over a period of time.

• Journal of the Korean Society of Safety
• /
• v.14 no.4
• /
• pp.135-141
• /
• 1999

This study is an experimental study to investigate the possibility of the utilization of paper ash as the cover, liner in waste disposal landfill and other construction materials. The sample used in these tests was obtained from Daehan paper mill. A series of tests were peformed to evaluate basic properties, compaction, permeability, compressive strength, consolidation, leaching, and CBR of paper ash. In order to investigate the soil engineering properties of paper ash, the test results were compared with those obtained of fly ash. The results of unconfined compression tests show that paper ash had a larger strength than the fly ash. Also, the maximum dry unit weight of paper ash was approximately 59～76.9% less than that of the fly ash. It was found from the results of leaching test that paper ash is classified as non-detrimental general wastes according to the waste management law.

• Journal of the Korean Society of Safety
• /
• v.14 no.4
• /
• pp.100-107
• /
• 1999

The purpose of the study is to investigate the effect of H$_2$ pressure on partial discharge (PD) activity and aging rate in turbine generator winding insulations. A series of field tests and laboratory tests were peformed to investigate the effect of $H_2$ pressure on PD activity. Field tests were conducted at two unit turbine generators in two conditions, in $H_2$ pressure and in air atmosphere. Obtained results are as follows ; 1) ${\Delta}tan{\delta}$ and maximum partial discharge are reduced with increase of $H_2$ pressure and partial discharge inception voltage. 2) The reduction ratio of ${\Delta}tan{\delta}$ due to $H_2$ pressure is higher than one of PD magnitude. 3) Partial discharge pulses suffer from attenuation and distortion when transmitted along windings, because of the complex L-C network between windings. From the result, partial discharge pulses are subjected to resonance phenomena in a generator winding.