• 전력전자학회논문지
• /
• 제18권5호
• /
• pp.477-484
• /
• 2013

This paper proposes a novel switching method of active clamp snubber for efficiency improvement of PV module integrated converter(MIC) system. Recently, MIC solar system is researched about the efficiency and safety. PV MIC system is used active clamp method of snubber circuit for the price and reliability of the system. But active clamp snubber circuit has the disadvantage that system efficiency is decreased for switch operating time because of heat loss of resonant between snubber capacitor and leakage inductance. To solve this problem, this paper proposes a novel switching method of the active clamp. The proposed method is a technique to reduce power consumption by reducing the resonance of the snubber switch operation time and through simulations and experiments proved the validity.

• 한국전기전자재료학회논문지
• /
• 제31권4호
• /
• pp.255-260
• /
• 2018

In recent years, increasing electricity use has led to considerable interest in green energy. In order to effectively supply, cut off, and operate an electric power system, many electric power facilities such as gas insulation switch (GIS), cable, and large substation facilities with higher densities are being developed to meet demand. However, because of the increased use of aging electric power facilities, safety problems are emerging. Electromagnetic wave and leakage current detection are mainly used as sensing methods to detect live-line partial discharges. Although electromagnetic sensors are excellent at providing an initial diagnosis and very reliable, it is difficult to precisely determine the fault point, while leakage current sensors require a connection to the ground line and are very vulnerable to line noise. The partial discharge characteristic in particular is accompanied by statistical irregularity, and it has been reported that proper statistical processing of data is very important. Therefore, in this paper, we present the results of analyzing ${\Phi}-q-n$ cluster distributions of partial discharge characteristics by using K-means clustering to develop an expert partial discharge diagnosis system generated in a GIS facility.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.349-352
• /
• 2003

A personal low-frequency stimulator is a portable device to relax muscle pains of a person. The stimulator generates combined low-frequency pulses to be applied to pads attached to painful muscles. This paper reports a development of such device with its characteristic analyses. The major components of our stimulator are MCU, high-voltage generating circuit part, high-voltage switching circuit part, input switch part and display unit. High-voltage generating circuit is designed by using a boost converter circuit and allows user control of the output voltage. High-voltage switching circuit, controlled by MCU, generates output voltage to be applied to pads. Input switch part is composed of power supply, intensity selection, mode selection and memory. Display unit adopts a text LCD module to display modes, Intensity, output frequency and user set-up time. Our designed safety circuit, to protect human body from possible electric shock, slowly increases the output voltage to the selected output intensity. It continuously checks the output pulse shape and disable the output when dangerous pulses are detected. This paper also shows some experimental results.

• 한국기계가공학회지
• /
• 제19권12호
• /
• pp.80-86
• /
• 2020

With the exception of welding activities, it is forbidden to use electricity in shipyards, owing to safety concerns such as the possibility of fire, explosions, and short circuits. In this paper, an automatic chamfering machine using pneumatics is proposed for use in such environments. Customers specify their requirements and the machine derives the corresponding theoretical design conditions. The proposed machine was used to perform 3D modeling, and its suitability and performance were confirmed via cutting experiments of the manufactured device. Two types of sensors may be used in this system: contact and non-contact. In the case of the contact type, an end-stop switch that can recognize the end of the material is installed, and when the machine reaches the end of the material, the end-stop switch is operated to cut off the air pressure. In the non-contact type, four sensors were used: photonic, ultrasonic, metal detection, and encoder. The use of the four sensors was repeated 30 times, and the average error determined. Thus, the optimum sensor was identified.

• 대한안전경영과학회지
• /
• 제10권2호
• /
• pp.205-210
• /
• 2008

The research interprets the principles of sampling error design for quality statistics models such as hypothesis test, interval estimation, control charts and acceptance sampling. Introducing the proper discussions of the design of significance level according to the use of hypothesis test, then it presents two methods to interpret significance by Neyman-Pearson and Fisher. Second point of the study proposes the design of confidence level for interval estimation by Bayesian confidence set, frequentist confidential set and fiducial interval. Third, the content also indicates the design of type I error and type II error considering both productivity and customer claim for control chart. Finally, the study reflects the design of producer's risk with operating charistictics curve, screening and switch rules for the purpose of purchasing and subcontraction.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2010년도 추계학술대회
• /
• pp.343-348
• /
• 2010

Earned Value Management System(EVMS) is a highly efficient tool in the project management, but it cannot easily determine the Actual Cost due to the indistinct criteria and extensive data. This study introduces a EVMS for project management and its actual case based on EVMS and ERP system which some additional modules are installed for performance measurement. It is expected that this new method enables a company to improve transparency by specifying expense items in detail and to switch quarterly settlement to monthly by reducing the time of calculation.

• Journal of information and communication convergence engineering
• /
• 제9권2호
• /
• pp.230-234
• /
• 2011

It is endeavoring for sea safety and fire[1] at sea prevention solidifying control of standard technology and safety supervision aspect in IMO[2] but sea accident and ship fire are happening continuously. Because using Robot in artistic talent of ship in this treatise, studied that correspond to Risk and manage. Attach fire perception sensor for Robot's Risk confrontation, and because using infrared rays sensor, TOUCH SWITCH, sound perception sensor, gas perception sensor, light perception sensor that is threaded in Robot and is achieved, controlled Robot, and establish Low-High value the speed of sound output use and DC MOTOR and COM SEN of when indicate Risk confrontation to Robot and establish Robot's Risk confrontation administration action.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1063-1070
• /
• 2005

Number of subway train units that Seoul Metropolitan Subway Corporation as at September 2005 is 1.944 on 4 routes from 60 units at the time of commencement of operation, having grown exponentially. Along with increase in the number of passengers the role of subway as safer and expedient means of transportation is now being required. Furthermore, the Corporation has been researching on means of improving the safety and reliability of subway entry/exit doors which has become an essential task and directly effect the safety of the passengers. In this Study, has developed sensory control system for the entry/exit door of the subway train using non-contact proximity sensor as a part of review of and measures against various issues of entry/exit door of the subway trains currently under operation. In addition, this sensor system was verified through test production and tests. If this technology becomes commercialized and practically utilized in the future, it would be able to make definite contribution to the safer transportation of passengers.

• 대한안전경영과학회지
• /
• 제13권3호
• /
• pp.145-152
• /
• 2011

Company's survival in a changing business environment is depend on what kind of strategy will be used for facing this business competition society. For this, many companies continued to apply management techniques to improve the activities in this process has been running productivity-oriented activities to switch away from the quality has become a central activity. In other words, quality improvement activities (quality improvement activity) for the continuing businesses is an important strategic element. In this study, single-PPM (Single-PPM) the company's leading quality improvement activities will be used and browse to accommodate factors that affect a successful quality improvement activities, absolute requirement for companies to learn about the conditions to improve the quality of corporate tries to emphasize the importance of the activity.

• 한국산학기술학회논문지
• /
• 제17권10호
• /
• pp.319-330
• /
• 2016

3D 프린팅 기술은 다양한 산업분야에서 개념모델 및 기능성 시제품을 제작하는데 많이 응용되고 있지만, 3D 프린팅 소재 및 제작된 제품 신뢰성 등의 여러 가지 이유로 상용화 제품으로 적용되는 데 한계가 존재한다. 본 논문에서는 3D 프린팅 기술을 이용한 산업적 응용분야 중 하나로 발전소 저탄장에 사용되는 풀 코드 스위치 모듈의 부품들 중 잦은 돌발 상황으로 인해 파손이 자주 발생하는 허브 구동부와 레버 고정부 부품들에 대해 현장에서 작업자들이 단기 대체부품으로 적용이 가능하도록 하는 부품 최적 설계 및 FDM 방식 3D 프린팅 제조공정기술에 대한 연구결과를 제시하였다. 3D 프린팅 기술의 경우 소재 적용에 있어서 한계가 존재하므로, 본 논문에서는 구조 최적화 설계를 통해 구조 안정성을 확보하는 방안에 대해 연구를 수행하였다. 허브 구동부 부품에 대해 내부 구조 형상 및 구조 설계 변수 최적화를 수행하여 좌측구동모드에서는 안전계수가 153.67% 증가한 1.243을 확보할 수 있었으며, 우측구동모드에서는 404.96% 증가한 3.156을 확보할 수 있었다. 레버 고정부 부품의 경우, 반복적인 스위칭 구동에 의한 굽힘 모멘트로 인해 발생하는 파손을 최소화하기 위해 구조 최적화 설계를 수행하여 26% 증가한 구조 안전계수(7.52)를 확보할 수 있었다. 본 연구를 통해 3D 프린팅 기술을 단기 대체부품 제조공정에 적용함에 있어서 소재 최적화를 통한 설계보다는 3D 프린팅 공정의 적층특성을 활용한 구조적 최적화 설계기법 이 더욱 유연한 결과를 도출할 수 있음을 확인할 수 있었다.