• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.4
• /
• pp.421-427
• /
• 2015

This study aims at reviewing first the cases of marine accidents of small fishing vessels and vessels towing and being towed and, the problems concerning such lights and shapes that could be misunderstood for those in concerned Rules, or that could impair their distinctive characteristics or obstruct to keep a proper look-out. And then I wish to make a suggestion of the necessity of amending the National Laws which stipulate the rules for the ship's lights and shapes as follows; Firstly, by amending the "Standard of Construction and Equipment for the Less Than 10 Gross Tonnage of Small Fishing Vessels" small fishing vessel must be equipped with the lights and shapes that are the same as those of "vessel engaged in fishing" prescribed by Rule 26 of the "COLREG 1972" and Rule 84 of the "Maritime Safety Law Act". Secondly, "Standard of Fishing Vessels Equipment" which stipulate the rules concerning the exception of the running lights and radar reflector for the small fishing vessels must be amended to meet the requirement of Rule 20 of the "Maritime Safety Act". Thirdly, the definition of "Length of the tow" which prescribed by Rule 2 of the "Maritime Safety Act" must be amended to meet the Rule 24 of the "COLREG 1972". And also I wish to adhere to the importance of displaying the adequate vessel lights and shapes by every mariner for preventing marine accidents.

• Journal of Food Hygiene and Safety
• /
• v.29 no.4
• /
• pp.312-315
• /
• 2014

The present study demonstrated the development and validation of the method for the quantification of phenol in food using gas chromatography coupled with mass spectrometry (GC-MS). After spiking of internal standard (Phenol-$d_5$) to food, those samples were extracted with organic solvent mixture (acetone : dichloromethane = 1 : 1, v/v) using ultra sonic extractor and cleaned by gel permeation chromatography (GPC) technique. The amount of phenol was determined by GC/MS. To validate the developed method, we evaluated parameters were the selectivity, linearity, accuracy, precision, and recovery. To demonstrate the selectivity of the method, blank samples of rice, corn, and fish(mackerel) were prepared and subjected to GC-MS analysis. To verify the linearity of the method, six different standard concentrations of phenol at 0.01, 0.05, 0.1, 0.5, 1 and 2.5 mg/kg were evaluated. The correlation coefficient ($r^2$) of calibration curve was 0.9999. The recovery rate for phenol standard calculated by internal standard method were 82.2~101.5% for samples fortified with 0.25, 0.50, and 1.0 mg/kg, respectively. Also the repeatability and reproducibility for validation of precision were 0.2~5.5%. According to the result of the validation, this established method was suitable for AOAC guideline. The limit of detection (LOD) for phenol analysis were 0.03~0.1 mg/kg, and the limit of quantification (LOQ) were 0.1~0.3 mg/kg. Therefore, we established the optimal analysis method for determination of phenol in food using GPC and GC/MS.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.608-616
• /
• 2021

Purpose: Safety inspections by existing personnel have been limited in evaluation and data securing due to concerns about the safety of technicians or difficulty in accessing them, and are becoming a bigger problem as the number of maintenance targets increases due to the aging of facilities. As drone technology develops, it is possible to ensure the safety of personnel, secure visual data, and diagnose quickly, and use it is increasing as safety inspection of facilities by drones was introduced recently. In order to further enhance utilization, it is considered necessary to base a consideration standard for facility appearance investigation by drones, and in this paper, research was conducted on dams. Method: To calculate the quality, existing domestic safety inspection and drone-related consideration standards were investigated, and procedures related to safety inspection using drones were compared and analyzed to review work procedures and construction types. In addition, empirical data were collected through drone photography and elevation image production for the actual dam. Result: Work types for safety inspection of facilities using drones were derived, and empirical survey results were collected for two dams according to work types. The existing guidelines were applied for the adjustment ratios for each structural type and standard of the facility, and if a meteorological reference point survey was necessary, the unmanned aerial vehicle survey of the construction work standard was applied. Conclusion: The finer the GSD in appearance investigation using drones, the greater the number of photographs taken, and the concept of adjustment cost was applied as a correction to calculate the consideration standard. In addition, it was found that the problem of maximum GSD indicating limitations should be considered in order to maintain the safe distance.

• Journal of Food Hygiene and Safety
• /
• v.36 no.1
• /
• pp.34-41
• /
• 2021

The purpose of this research is to improve analysis methods of determining the contents of fatty acids in infant formulas and follow-up formulas. A gas chromatography (GC) method was performed on a GC system coupled to flame ionization detector, with a fused silica capillary column (SP2560, 100 m×0.25 mm, 0.20 ㎛). The method was validated using standard reference material (SRM, NIST 1849a). Performance parameters for method validation such as specificity, linearity, limits of detection (LOD) and quantification (LOQ), accuracy and precision were examined. The linearity of standard solution with correlation coefficient was higher than 0.999 in the range of 0.1-5 mg/mL. The LOD and LOQ were 0.01-0.06 mg/mL and 0.03-0.2 mg/mL, respectively. The recovery using standard reference material was confirmed and the precision was found to be between 0.8% and 2.9% relative standard deviation (RSD). Optimized methods were applied in sample analysis to verify the reliability. All the tested products had acceptable contents of fatty acids compared with component specification for nutrition labeling. The result of this research will provide efficient experimental information and strengthen the management of nutrients in infant formula and follow-up formula.

• The Safety technology
• /
• no.36
• /
• pp.8-11
• /
• 2000

최근(2000. 11월)미국에서는 근골격계 장애(MSDs ; Musculoskeletal disorfers)를 방지하기 위해 직업안전보건청 (OSHA : Occupational Safety and Health Administration)에서는 인간공학 프로그램표준(Ergonomis program standard)을 규정화하기 위해 관보(Federal Register)에 게시하는 등 법제화 추진이 이루어지고 있으며, 또한 이것이 기업체 단체에서는 규정화 무효를 위한 연방법정 소송이 전개되고 있으며 노동단체에서는 우호적 입장을 보이고 있는 등의 내용이 미국 언론 및 해외 통신(NY Times, LA Times, Washington Times, Wall ST Journal, AFP)에 보도되고 있다. 이미 미국의 반도체 기업에서는 반도체 제조설비의 인간공학을 위한 안전 지침을 정하고 있는 등 인간공학 표준화가 이루어지고 있어 그에 대한 동향을 살펴보고, 이러한 인간공학 프로그램 표준에 대해 자세한 내용을 게제할 계획이다. 금번 호에서는 그 동향과 인간공학 프로그램 표준의 필요성과 그 목적 등의 개요를 싣고 계속해서 구체적인 내용을 소개해 나갈 계획이다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.251-256
• /
• 1997

The safety and reliablity of nuclear power plant operations relies heavily on the plant operators ability to respond to various emergency situations. It has become standard industry practice to utilize simulators to improve the safety and reliability of nuclear power plants operations. The simulators built for Younggwang#3("YGN#3"), which is based on the Korean Standard Nuclear Power Plant ("KSNPP")design, has been developed precisely for this purpose. The YGN#3 simulator is the first simulator in Korea to be developed locally and is now operational on site. A particular attention was placed on the development of CPC/COLLS safety system which is unique to the YGN#3. The effort to develop CPC/COLLS simulation model has been successful and plans exist for applying this model to simulator projects in the future.jects in the future.

• Journal of the Korean Society of Safety
• /
• v.31 no.4
• /
• pp.82-89
• /
• 2016

In this paper, various of experiments were performed for checking the usefulness of Pozzolan Inorganic Polymer(PIP) Waterproof Admixture. The results of the experiment enabled to set the optimum mixture ratio of PIP waterproof admixture as 3.5%. Then, the test specimen mixed with PIP waterproof admixture was produced and consider whether meeting the quality standard of waterproofing admixture for concrete (KS F 4926) From the results, all the items such as mechanical properties and durability were meet the quality standard of KS. The PIP waterproof admixture concrete shows the high resistance of absorption, permeability and chloride ion penetration thanks to its internal components such as siliceous powder, zinc stearate and dispersive polymer.

• International Journal of Human Ecology
• /
• v.7 no.1
• /
• pp.77-83
• /
• 2006

The ability to customize garments for fit in the apparel industry is directly tied to the availability of comprehensive and accurate sets of anthropometrical data for each consumer. The data for apparel sizing systems is available from three major standard/ research organizations: ASTM (American Society for Testing and Materials), ISO (International Standard Organization), and NCHS (National Center for Health Statistics). However, these standards ignore various head shapes and are outdated for the development future head products. This creates a data gap an ever changing multi-cultural society such as the United Sates. Although major government and industry safety organizations recognize the importance of safety for head products, few studies were found to support their reasoning. The purpose of this study is to provide accurate head dimension data for developing safety head products by analyzing various head shapes in the United Sates which includes various ethnic backgrounds. This study was carried out on 105 males in the United States. Factor analysis, cluster analysis, Moreover, Duncan analysis were all used for analyzing various head shapes.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1118-1125
• /
• 2010

This paper presents the methods to acquire the Safety Certificate from Independent Safety Assessment based on the IEC standard62279 which is commonly applied to railway system for Automatic Train Control(ATC) system in accordance with Urban Maglev project. This also shows approach methods and relative activities for project life-cycle to accomplish and ensure the system requirements of ATC system, RAMS and S/W quality activities. Furthermore, the key tasks conducted with ISA are noted in detail. These kind of activities for software quality of ATC system to obtain Safety Certificate could be a CASE model to improve the quality of domestic railway system and products, and also contribute to the growth of railway business and toward the achievement of overseas' railway signaling markets.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.13 no.22
• /
• pp.71-78
• /
• 1990

Some problems to assess the safety of automated man-machine system are studied in many ways. The difficulty occurred in this system is the vagueness of human behavior. Fuzzy set theory is used to assess the human behavior in safety analysis. The unsafe behavior listed top 10 in accident statistics would be explained as the factors of human vagueness. Three cases are considered, which consist of man-machine system as man-man, man-machine, machine-machine types. For the design of safe task, using characteristics of work performance, each motion cycle time is required to know the rate of learning. Approach of human behavior to the standard motion means more safe motion. It is important to design the works as to minimize the time performance to the standard motion's, which utilize the control of risk potential with easy. In that process, use of fuzzy set theory is appropriate to analyze the human behavior to identify its vagueness.