• 제목/요약/키워드: safety reinforcement

검색결과 771건 처리시간 0.027초

콘크리트 구조물의 전단 안정성 평가를 위한 전단전달 실험 및 해석 (An Experimental and Analytical Study on Shear Transfer for Safety Evaluation of Concrete Structure)

  • 김광수
    • 한국안전학회지
    • /
    • 제23권3호
    • /
    • pp.42-50
    • /
    • 2008
  • This study, push-off tests for the initially uncracked specimens were conducted to investigate shear transfer mechanism in reinforce concrete elements. Experimental programs for shear transfer were undertaken to investigate the effect of the concrete compressive strength, the presence of steel stirrups as shear reinforcement and the amount of steel stirrups. As the shear plane is loaded, several cracks form in a direction inclined to the shear plane, creating compression struts in the concrete. For this stage, shear is being transferred through a truss-like action produced by the combination of the compressive force in the concrete struts and the tensile force that the steel reinforcement crossing the shear plane develops. In the normal strength concrete specimens with steel stirrups, ultimate failure occurred when the compression struts crushed in concrete. In the high strength concrete specimens, on the other hand, ultimate failure occurred when the steel stirrups developed their yield strength.

교각 하부사면에 대한 안정성 검토 사례연구 (A Case Study Of Stability Examination About Slope Under Pier)

  • 배성우;신창건;서정유
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회
    • /
    • pp.712-721
    • /
    • 2010
  • Our country is composed of about 70% mountain district. Therefore the tunnel and the bridge are used plentifully in the road. The bridge the establishment location of the pier according to ground condition and the route is executed from various condition. this study leads and stability investigation and reinforcement instance there is a goal which presents an example about investigation.

  • PDF

유럽과 국내기준에 규정된 취성파괴 방지를 위한 휨 최소철근량 고찰 (A Study on the Flexural Minimum Reinforcement for Prevention of Brittle Failure Specified in KCI and EN Codes)

  • 박성재;강태성;문도영
    • 콘크리트학회논문집
    • /
    • 제26권2호
    • /
    • pp.211-218
    • /
    • 2014
  • 철근콘크리트 직사각형 휨 부재의 설계에서, 최소철근량은 취성파괴를 방지하기 위하여 필요하다. 콘크리트구조기준은 극한강도 설계개념을 기반으로 국내에서 일반적으로 사용되는 모델코드이다. 그러나 국토해양부에서 2012년 제정한 도로교설계기준은 한계상태설계법을 기반으로 하고 있으며, 유럽의 EN 코드와 유사하다. 따라서, 두 설계기준에서 제시된 최소철근량은 서로 다른 기원과 안전율에 근거한다. 이 연구에서 단철근 직사각형 단면의 실험체에 상기 두 기준을 적용하여 분석한 결과, EN 코드에서 제시된 최소철근량은 KCI 코드에서 제시된 최소철근량의 76%에 불과하며, 이러한 점에서 구조 설계자의 혼란을 야기한다. 이 연구에서는, KCI와 EN 코드에서 제시한 각각의 최소철근량을 보강한 9개의 직사각형 단면의 휨 실험체를 제작하고, 휨 실험을 수행하였다. 결과에서, 모든 실험체에 대하여 실험에서 측정된 공칭강도와 균열강도의 비는 각 설계식으로부터 평가된 공칭강도와 균열강도의 비에 비하여 25% 이상 큰 것으로 나타났다. 국내기준에서 규정하고 있는 최소철근비의 76%가 보강된 EN 보는 보강철근의 파단으로 파괴되었지만 연성적인 파괴거동을 나타내었다. 따라서, 유럽과 국내기준에 의하여 설계된 최소철근비로 보강된 보는 충분한 구조적 안전성과 연성을 보유하고 있는 것으로 확인되었다.

리브 보강 프리캐스트 터널 Liner의 역학적 거동 특성 (Mechanical behaviour of tunnel liner using precast segment reinforced by rib)

  • 이규필;이성원;신휴성;황재홍
    • 한국터널지하공간학회 논문집
    • /
    • 제10권3호
    • /
    • pp.295-302
    • /
    • 2008
  • 콘크리트 현장타설 개착식 터널구조물의 문제점을 해결하기 위하여, 시공성 및 품질관리 등 측면에서 유리한 프리캐스트 세그먼트를 이용한 개착식 터널구조물의 시공이 가장 효과적인 대안이라 할 수 있다. 그러나 프리캐스트 세그먼트를 이용한 개착식 터널구조물의 설계 및 시공은 고성토 또는 광폭터널 조건에서는 시공성 및 구조적 안정성 등과 같은 단점 때문에 그 활용이 제한적이다. 따라서, 본 연구에서는 프리캐스트 세그먼트를 이용한 개착식 터널구조물의 구조적 안정성 및 시공성 향상을 위하여, 리브 보강 프리캐스트 아치를 이용한 개착시 터널구조물을 개발하였으며, 대형 정적하중재하 실험을 통하여 리브보강에 의한 프리캐스트 아치 터널구조물의 역학적 거동 특성을 분석하였다 프리캐스트 세그먼트의 리브 보강 효과로 천단부에 균열이 발생하는 하중은 약 1.7배, 구조물의 극한하중은 약 3.3배 증가하는 등 리브 보강효과를 통하여 프리캐스트 세그먼트를 이용한 개착식 터널구조물의 구조적 안정성을 크게 향상시켰다.

  • PDF

터널 붕락특성과 시공 중 보강공법 선정방법 개발 (Development of Countermeasure Expert System for Tunneling Failure)

  • 김창용;박치현;배규진;홍성완;오명렬
    • 한국암반공학회:학술대회논문집
    • /
    • 한국암반공학회 2000년도 암반공학문제의 수치해석(Numerical Analysis in Rock Engineering Problems)
    • /
    • pp.171-181
    • /
    • 2000
  • 지하공간 개발에 대한 관심이 높아지면서 국내에서도 안전한 터널시공에 대한 연구가 많이 진행되었다. 본 연구에서는 터널 시공 중 발생 가능한 터널의 붕락 사고의 특성을 조사하여 각종 터널의 붕락사고 유형을 파악하고, 이에 대한 구체적인 원인을 분석하였으며, 사례분석을 통해 터널 붕락의 주요 요인과 개략적인 대책도 함게 제시하였다. 또한, 국내·외 터널보강공법의 기준과 적용현황을 분석하여 세부적이고 합리적인 보강공법의 체계확립을 위한 기초를 마련하고자 하였다. 본 연구에서는 터널 막장의 안전성 등급을 결정하고, 적절한 보강공법을 선정을 위해 퍼지 수량화 이론과퍼지추론시스템을 기반으로 터널정보 데이터베이스를 구축하여 전문가시스템의 모형을 개발하였다. 개발한 시스템의 검증을 위하여 다양한 보강공법을 시공하였던 한강하저터널을 비롯한 국내·외 3곳의 터널 현장 자료를 이용하여 적용한 결과 실제 시행한 보강공범과 근접한 추론결과를 보였다. 정보화시공을 통해 터널 막장기록과 계측자료의 이용을 극대화하고 객관적인 기준의 부재로 인해 일부 전문가의 경험에만 의존하고 있는 국내 보강공법 시공기술을 보다 발전시켜 합리적인 보강공법을 제시하는데 도움이 되고자 하였다.

  • PDF

터널 붕락특성과 시공 중 보강공법 선정방법 개발 (Development of Countermeasure Expert System for Tunneling Failure)

  • 김창용;박치현;배규진;홍성완;오명렬
    • 터널과지하공간
    • /
    • 제10권3호
    • /
    • pp.418-429
    • /
    • 2000
  • 지하공간 개발에 대한 관심이 높아지면서 국내에서도 안전한 터널시공에 대한 연구가 많이 진행되었다. 본 연구에서는 터널 시공 중 발생 가능한 터널의 붕락 사고의 특성을 조사하여 각종 터널의 붕락사고 유형을 파악하고, 이에 대한 구체적인 원인을 분석하였으며, 사례분석을 통해 터널 붕락의 주요 요인과 개략적인 대책도 함께 제시하였다. 또한 , 국내ㆍ외 터널보강공법의 기준과 적용현황을 분석하여 세부적이고 합리적인 보강공법의 체계확립을 위한 기초를 마련하고자 하였다. 본 연구에서는 터널 막장의 안전성 등급을 결정하고, 적절한 보강공법을 선정을 위해 퍼지 수량화 이론과 퍼지추론 시스템을 기반으로 터널정보 데이터베이스를 구축하여 전문가시스템의 모형을 개발하였다. 개발한 시스템의 검증을 위하여 다양한 보강공법을 시공하였던 한강하저터널을 비롯한 국내ㆍ외 3 곳의 터널 현장 자료를 이용하여 적용한 결과 실제 시행한 보강공법과 근접한 추론결과를 보였다. 정보화시공을 통해 터널 막장기록과 계측자료의 이용을 극대화하고 객관적인 기준의 부재로 인해 일부 전문가의 경험에만 의존하고 있는 국내 보강공법 시공기술을 보다 발전시켜 합리적인 보강공법을 제시하는데 도움이 되고자 하였다.

  • PDF

식생뿌리의 전단강도 보강에 의한 사면안전율 해석 -잣나무 뿌리를 중심으로- (A Study on the Slope Stability Analysis by Shearing Reinforcement of Vegetation Roots -Focused on the Pinus Koraiensis Roots-)

  • 조주형;이종성
    • 한국조경학회지
    • /
    • 제27권5호
    • /
    • pp.80-93
    • /
    • 2000
  • This study measured the shearing resistance of the roots of the Pinus Koraiensis by the tensile strength gained through their individual tensile test for the Root Reinforcement Model. On the basis of the shearing resistance value calculated through such a process the factor of safety(Fs) was comparatively presented by using the simplified Janbu Method in PCSTABL5M, the slop-analyzing software which had been developed in Purdue University of the U.S.A according to the shape of a slope and the type of soil. The results to have measured a stress and the factor of safety(Fs) by experiment are as follows. 1) The mean root diameter of the Pinus Koraiensis used for this experiment was 2.483mm and the mean tensile stress was calculated as 422.846(kgf/$\textrm{cm}^2$). In the strain ratio of material and the elastic modulus was measured 7.8%, 9,291.92(kgf/$\textrm{cm}^2$). 2) The shearing strength including the resistance of soil and root is expressed as Rt=C+Cr+$\sigma$.tan . ΔCr(kg/$\textrm{cm}^2$) of the shearing resistance calculated by estimating the areal ratio of roots at 10 is 0.253(kgf/$\textrm{cm}^2$). 3) As the result of making an analysis of the natural slope stability by the soil parameter, the factor of safety(Fs) was calculated at 1.795 in CL, and the stability analysis of the root reinforcement slope, Fs was calculated at 1.952. However, since a precise analysis of the controlled factors of the slope analyses are demanded for more accurate dynamic analyses, the future demands a study on this.

  • PDF

Symptom-based reliability analyses and performance assessment of corroded reinforced concrete structures

  • Chen, Hua-Peng;Xiao, Nan
    • Structural Engineering and Mechanics
    • /
    • 제53권6호
    • /
    • pp.1183-1200
    • /
    • 2015
  • Reinforcement corrosion can cause serious safety deterioration to aging concrete structures exposed in aggressive environments. This paper presents an approach for reliability analyses of deteriorating reinforced concrete structures affected by reinforcement corrosion on the basis of the representative symptoms identified during the deterioration process. The concrete cracking growth and rebar bond strength evolution due to reinforcement corrosion are chosen as key symptoms for the performance deterioration of concrete structures. The crack width at concrete cover surface largely depends on the corrosion penetration of rebar due to the expansive rust layer at the bond interface generated by reinforcement corrosion. The bond strength of rebar in the concrete correlates well with concrete crack width and decays steadily with crack width growth. The estimates of cracking development and bond strength deterioration are examined by experimental data available from various sources, and then matched with symptom-based lifetime Weibull model. The symptom reliability and remaining useful life are predicted from the predictive lifetime Weibull model for deteriorating concrete structures. Finally, a numerical example is provided to demonstrate the applicability of the proposed approach for forecasting the performance of concrete structures subject to reinforcement corrosion. The results show that the corrosion rate has significant impact on the reliability associated with serviceability and load bearing capacity of reinforced concrete structures during their service life.

연결보의 배근 상세 효과 평가 (Evaluation of Reinforcement Detail Effect on Coupling Beams)

  • 이현호
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제25권2호
    • /
    • pp.49-57
    • /
    • 2021
  • 본 연구에서는 특수 전단벽 연결보의 배근 상세를 개선하여 구조 성능의 확보는 물론 시공성을 개선한 연구를 진행하였다. 기존 대각선 다발철근과 전단 보강근을 배근한 실험체를 기본으로 이를 굵은 대각철근으로 교체한 실험체, 수평 보강근으로 교체한 실험체를 변수로 선정하였다. 실험결과 기존 대각보강근을 굵은 직경의 철근으로 대체한 실험체가 기본 실험체와 유사한 거동을 보여 복잡합 연결보 보강 상세의 대안으로 적용 가능한 것으로 평가되었다.

철근콘크리트 T형교의 안전진단에 관한 연구 (A Study on the Safety Inspection of the T-Beam Bridges)

  • 채원규
    • 한국안전학회지
    • /
    • 제10권1호
    • /
    • pp.50-55
    • /
    • 1995
  • In this thesis, the safety inspection of the T-beam bridges were studied. The stage of the safety inspection were classified according to the importance of the inspection contents the preliminary inspection, the resume inspection, the detail inspection, and the close inspection. By stages, the Inspection contents, the inspection items, and the inspection methods were systematized. And the method of the repair or the reinforcement for the demaged bridges were also suggested.

  • PDF