• 대한안전경영과학회지
• /
• 제13권4호
• /
• pp.9-16
• /
• 2011

Modern systems become more complex and the demand for systems safety goes up sharply. Thus, the proper handling of the safety requirements in the systems design is getting greatly increased attention these days. Hazard analysis has been one of the active areas of research in connection with systems safety. In this paper, we study a subject on how the hazard analysis results can be incorporated in the systems design. To this end we set up a goal on how to systematically generate safety requirements that should reflect hazard analysis results and be implemented in the systems design and development. To do so, we first review the process for systems design and suggest the associated Model. Then the process and results of hazard analysis are analyzed and Modeled particularly with emphasis on the safety data. The resulting data Model incorporating both the hazard analysis and system life cycle is used in the generation of safety requirements. Based on the developed data Model, the generation of the requirements, the construction of requirements DB, and the change management later on is demonstrated through the use of a computer-aided software tool.

• 한국안전학회지
• /
• 제33권3호
• /
• pp.27-32
• /
• 2018

Nowadays, to prevent electrical accidents in Korea, inspectors directly performed checking general electrical facilities as a cycle from every one to three years. It is difficult to presuppose an omen because intact conditions of electrical equipments are not kept at the time of inspection. In this paper, in order to ensure effectiveness of an online basis electric inspection, we developed an electrical safety IoT system using LoRa communication technology to enable monitoring mainly electrical safety components such as overcurrent, overvoltage, resistive leakage current, and power. Then we proposed a method for verifying performances of the prosed electrical safety IoT system. Resistive leakage currents are calculated by using difference of phase between voltages and currents. We verified that average errors are 0.97%, which reference goal is ${\pm}5%$ for a device, through reliability test according to conditions. Results of this research can be used as basic study materials to develop technologies for measuring three phase leakage current and for implementing public electrical safety. platform.

• 정보과학회 논문지
• /
• 제44권9호
• /
• pp.893-907
• /
• 2017

안전 필수 시스템에서 소프트웨어 결함은 심각한 결과를 초래하므로, 개발의 첫 단계인 요구사항 명세부터 안전성을 고려해야한다. 자연어로 작성된 요구사항은 여러 이해관계자들에게서 도출되어 모호함과 부정확성에 의한 결함을 갖고 있어도 검출하기 어렵다. 이러한 문제를 해결하기 위해 표준문안과 GSN 모델을 이용한 요구사항 명세방법을 제안한다. 표준문안은 선 정의된 서식에 맞춰 요구사항을 작성하는 준-정형 언어로, 표준문안에 맞춰 요구사항을 작성하면 표현의 일관성을 갖기 때문에 이해관계자들이 요구사항이 의미하는 바에 대한 모호함을 방지하여 요구사항의 정확한 의미를 정의하는데 도움이 된다. GSN은 시스템이 안전하다는 것을 관련기관에 증명하기 위한 Safety Case 작성에서 적합성을 인정받고 있는 표기법으로 기능목표, Safety Evidence 등을 표현한다. 본 연구에서는 안전 필수 시스템의 요구사항을 명세하기에 적합하도록 설계된 표준문안과 GSN 모델을 이용하여 요구사항 명세단계에서부터 결함을 쉽게 식별하고, Safety Evidence와의 연결을 통해 안전적합성을 증명할 수 있다. 또한 이 과정에서 발견된 요구사항의 결함을 수정하여 안전성 있는 소프트웨어를 개발할 수 있다.

• Safety and Health at Work
• /
• 제7권1호
• /
• pp.6-11
• /
• 2016

Background: A permit to work (PTW) is a formal written system to control certain types of work which are identified as potentially hazardous. However, human error in PTW processes can lead to an accident. Methods: This cross-sectional, descriptive study was conducted to estimate the probability of human errors in PTWprocesses in a chemical plant in Iran. In the first stage, through interviewing the personnel and studying the procedure in the plant, the PTW process was analyzed using the hierarchical task analysis technique. In doing so, PTWwas considered as a goal and detailed tasks to achieve the goal were analyzed. In the next step, the standardized plant analysis risk-human (SPAR-H) reliability analysis method was applied for estimation of human error probability. Results: The mean probability of human error in the PTW system was estimated to be 0.11. The highest probability of human error in the PTW process was related to flammable gas testing (50.7%). Conclusion: The SPAR-H method applied in this study could analyze and quantify the potential human errors and extract the required measures for reducing the error probabilities in PTW system. Some suggestions to reduce the likelihood of errors, especially in the field of modifying the performance shaping factors and dependencies among tasks are provided.

• 대한교통학회지
• /
• 제26권4호
• /
• pp.29-40
• /
• 2008

우리나라는 건설교통부에서 규정하는 지침에 의거하여 도로를 설계하는데 안전한 도로의 건설을 위해서는 사고와 연관된 기하구조요인의 정확한 이해와 분석을 통해 도로의 설계자가 도로 설계과정에 반영하도록 하고 있다. 따라서 본 연구의 목적은 고속도로 인터체인지에서 발생하는 교통사고를 실제로 수집이 가능한 도로기하구조 및 교통여건에 관한 자료만을 이용하여 신뢰성있게 분석할 수 있는 모형으로 정립하는데 있다. 본 연구에서는 고속도로상의 총 129개 트럼펫인터체인지와 35개 클로버인터체인지 상에서 연결로 형식별로 발생한 교통사고를 이용하여 다양한 교통사고요인들의 관계를 분석하기 위해 교통사고발생분포를 통계학적 방법을 통하여 분석한 바, 음이항분포가 가장 적합한 것으로 확인되었다. 따라서 트럼펫인터체인지의 연결로 형식별, 그리고 클로버인터체인지의 연결로 형식별로 교통사고를 분석할 수 있는 음이항회귀모형을 개발하였다. 본 모형은 고속도로를 계획 및 설계하는 초기단계에서 인터체인지의 유형과 인터체인지 연결로의 유형을 결정하는데 활용할 목적으로 개발되었으며, 본 모형의 적합성을 판단하는 여러 가지 통계학적 값들과 모형을 통해 예측한 값들, 그리고 실제로 현장에서 관측한 값들의 차이를 분석한 바 본 논문에서 구축한 모형이 이론적 및 실용적 측면에서 적합하게 구축되었음을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.118-120
• /
• 1996

We've been reported recently that increase of installing big power converting equipment which makes harmonics result in damage on transformer for incoming and load. Specially, harmonics that cause overheat and aging is severer in cast-resin transformer a kind of dr type than in oil one. The goal of this paper is to prove the process for aging of transformer that result from harmonics in according to both of theory and actual measurement on site. And we introduce diagnostic methods to estimate aging condition of cast-resin transformer in accordance with simulation.

• 한국안전학회지
• /
• 제21권3호
• /
• pp.94-100
• /
• 2006

The goal of this study is to show the way to increase the safety of deteriorated PSC beam bridges by the to-box reinforcing method. This method is to change the open girder section into the closed box section by connecting bottom flanges of neighboring PSC girders with the precast panels embedding PS tendons at the anchor block. The box section is composed of three concrete members with different casting ages, RC slab, PSC beam, precast panel. This different aging requires a time-dependent analysis considering construction sequences. Reliability index and failure probability are produced by the AFOSM reliability analysis. Transversely five schemes and longitudinally two schemes are considered. The full reinforcing scheme, transversely and longitudinally, shows the highest reliability index, but it requires more cost for retrofit. The partial reinforcing scheme 4, 4-1 are recommended in this study as the economically best scheme.

• 한국안전학회지
• /
• 제33권2호
• /
• pp.39-44
• /
• 2018

Dust explosions are occurring in a variety of industries. A dust explosion caused by a specific energy generates huge amount of energy in the ignition and releases decomposition gas. Damages can be increased since this released decomposition gas can cause second and subsequent explosions. In this study, the goal was to obtain practical information on what could affect the explosion by comparing the characteristics of two kinds of dusts with completely different chemical properties. Three kinds of dusts were measured and evaluated for explosion pressure, dust explosion index, explosion limit and minimum ignition energy. It is possible to grasp the characteristics of each dust and use it as useful accident prevention data in the production of raw material powder.

• Safety and Health at Work
• /
• 제11권2호
• /
• pp.241-243
• /
• 2020

Coronavirus disease 2019 poses an occupational health risk to health-care workers. Several thousand health-care workers have already been infected, mainly in China. Preventing intra-hospital transmission of the communicable disease is therefore a priority. Based on the Systems Engineering Initiative for Patient Safety model, the strategies and measures to protect health-care workers in an acute tertiary hospital are described along the domains of work task, technologies and tools, work environmental factors, and organizational conditions. The principle of zero occupational infection remains an achievable goal that all health-care systems need to strive for in the face of a potential pandemic.

• 대한안전경영과학회지
• /
• 제8권2호
• /
• pp.25-38
• /
• 2006

It was investigated the current state of work-related musculoskeletal disorders (WMSDs), which is one of the major problems in occupational safety and health management. A survey was conducted for safety personnel serve in the enterprises located at two cities in Gyungbuk area, Gumi and Pohang where the major industrial complex reside. The goal of this study was to identify whether the category and scale of the enterprises affect the sort of hazard factors, occurrence rate, and countermeasures against WMSDs. The results from the survey indicated that there were significant differences in the level of recognition and counteracts for WMSDs among the enterprises subject to their categories and scales. On the basis of these results, it was considered a more efficient way of spreading proper ergonomic knowledge and skills to the industries that were coincided with the circumstances of individual enterprise.