• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.1 s.9
• /
• pp.55-63
• /
• 2006

Speeding is one of the major causes of traffic accidnets in urban areas. Driver feedback sign(DFS) is a traffic control device that can be used for many traffic environments including work zones, school zones, and roadways. In this paper, the effectiveness of DFS was evaluated through a field study using speed data collected from before and after study periods. In addition traffic safety improvement was also quantitatively estimated using the variance of speed data collected. Staistical test results showed that the speed difference was statistically significant, and the distribution of speed data was also shifted greatly. Therefore, it was concluded that installing the DFS in roadways might lead to unifomity of speed of traffic flow, thus, potential safety improvement might be expected.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.241-246
• /
• 2006

This paper describes two kinds of personal hand-held electronic devices to support marine leisure safety. The one is Radar response-type safety device triggering by the pulse signal from a commercial 9GHz-band Radar to provide quick search and rescue with combined civilian-government-military fleets. The other one is M-RFID (Marine Radio Frequency IDentification) based safety electronic device using 900MHz Tx/Rx with spread spectrum frequency hopping and GPS. Through the field tests at sea using Korea Coast Guard's warship the operating performances are verified. Further plan for practical use of each device was also discussed.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.103-111
• /
• 2021

In modern society, digital lifestyles are spreading to minimize contact with people and to receive contactless information. The spread trend has established an unmanned distribution system in which transactions through contactless technologies such as kiosks and chatbots are activated in face-to-face transactions with sellers and consumers. In order to streamline logistics supply worldwide, digital new deal based joint logistics hubs, unmanned courier storage platforms, and fresh logistics based last mile services have been developed into unmanned logistics systems, focusing on the intelligent logistics system automation process. Unmanned courier storage system installed in urban areas and home to daily logistics where volume is concentrated are provided with fresh logistics services through cold chain and receiving freights in contactless environments. Development is also underway to minimize safety accidents caused by courier services, such as managing various information based on the integrated control system. This paper defines the concept of integrated operation for the development of a platform for contactless unmanned courier storage device developed into next-generation logistics system. In addition, we intend to develop systems engineering-based output for deriving safety requirements and specifications by identifying risk sources that may occur in the operational scenario. Therefore, the goal is to establish a foundation for safety and reliability between interfaces of logistics systems to be installed in apartment and subway station environments that want to provide unmanned logistics services to various consumers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.9
• /
• pp.1272-1278
• /
• 2022

The government enacted and promulgated the 'Severe Accident Punishment Act' in January 2021 and is implementing this law. However, the number of occupational accidents in 2021 increased by 10.7% compared to the same period of the previous year. Therefore, safety measures are urgently needed in the industrial field. In this study, BLE Mesh networking technology is applied for safety management of high-risk industrial sites with poor communication environment. The complex sensor AIoT device collects gas sensing values, voice and motion values in real time, analyzes the information values through artificial intelligence LSTM algorithm and CNN algorithm, and recognizes dangerous situations and transmits them to the server. The server monitors the transmitted risk information in real time so that immediate relief measures are taken. By applying the AIoT device and safety management system proposed in this study to high-risk industrial sites, it will minimize industrial accidents and contribute to the expansion of the social safety net.

• Journal of Environmental Health Sciences
• /
• v.49 no.2
• /
• pp.78-88
• /
• 2023

Background: Exposure to volatile organic compounds (VOCs) can have acute and chronic health effects on human beings in general and in working environments. In particular, VOCs are often emitted in large quantities in industrial settings. In such circumstances, there is a need to improve the indoor air quality at workplaces. Objectives: The purposes of this study were to verify the effectiveness of air cleaning devices in workplaces and provide alternative solutions for improving working environments. Methods: Personal exposure and area level of VOCs for workers were evaluated in a car-part adhesive process before and after installing an air cleaning device with a TiO₂-coated filter. Passive samplers and direct reading instruments were used to collect and analyze the VOCs, and the removal efficiency and improvement of air quality were evaluated. We also calculated the exposure index (EI) to assess the risk level in the workplace. Results: The removal efficiency for VOCs through the installation of the air cleaning device was approximately 26.9~69.0% as determined by the concentration levels before and after installation. The measured substances did not exceed the exposure limits for the work environment and the EI was less than 1. However, carcinogenic substances such as benzene, formaldehyde, carbon tetrachloride, and trichloroethylene were detected. Conclusions: The application of an air cleaning device can be a solution for controlling the indoor air quality in a workplace, particularly in cases where ventilation systems cannot be installed due to process limitations.

• Proceedings of the KIEE Conference
• /
• 2008.04b
• /
• pp.131-133
• /
• 2008

This study presents on the analysis fire hazards of drum type electric washing machine. In order to analyze fire hazards fire experiment is conducted. The fire experiment is conducted to simulate under the normal condition and abnormal condition. The experiment under the abnormal condition is simulated in safety device failure, situation of accumulated dust and tracking phenomenon caused by humidity. The results show that fire hazard is high at the abnormal condition. In this paper, we suggest to use the safety device of low operating temperature in electric washing machine for reducing fire hazard.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1403-1407
• /
• 2007

The bogie of Rolling Stock is the basic rolling component. It operates the train body, guides the body considering various tracks and offers comfort to passengers. We can verify the safety level of bogie about all factors through the first -grade scenario of Preliminary Hazard Analysis, but especially the horizontal acceleration sensor, equipped in each power bogie and trailer bogie, is the device, which makes it possible to test bogie instability and uncomfortable body movements by the method, similar to actual train driving, and in this context the necessity of this device becomes important. This paper would classify the main functions of driving sub system and examine the reliability, availability, maintainability and safety, which are main factors of RAMS. Especially, we would realize the bogie instability sensor with a simulator and offer the content in analyzing the data by the statistical method, which are obtained through the connected test with OBCS.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.192-194
• /
• 2009

Came to make a many development from the domestic railroad operation. The light rail transit enterprise is constructed plentifully. Consequently, the passenger safety importantly this, is recognized. The safety device which is applied in train control technique of the new railroad enterprise is important. Respects the updated technology development and an introduction of train control the safeguards is applied. Consequently, From the present paper researched the type and a technical development present condition of perception technique from platform safety device.

• Journal of Biomedical Engineering Research
• /
• v.41 no.6
• /
• pp.256-263
• /
• 2020

The importance of quality control has been emphasized to maintain safety of patients and satisfaction of medical service with medical devices used in clinic. Accordingly, objective evaluation method and standards consistently has been brought up for demand to replace outdated medical devices in appropriate time and to maintain the quality of medical service. Though many studies made suggestions methods to determine what medical devices to be replaced first, these methods were difficult in practice for its complex evaluation criteria and long time to evaluate. Therefore, in this study, a simple evaluation method is developed to identify and prioritize medical devices that are ought to be replaced. For the development of this simple evaluation method, four major characteristics of technology, safety, finance, and user satisfaction, which are considered in clinics to evaluate medical device replacement, and 14 minor attributes are distinctively selected. Each characteristic is assessed in binary form of "YES" or "NO" to minimize its subjective nature. Using this method to evaluate sampled medical devices belonging to four different characteristics, devices are suggested to be replaced in the current financial year or in the following financial year, or re-evaluated by the end of this financial year. Such results of evaluation can amend the subjective nature of existing evaluation method and give objective standards more promptly.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.47-53
• /
• 2019

Safety accidents at industrial sites can occur anytime, anywhere. Recently, research on the industrial safety management system based on the IoT has been actively conducted. However, most of the studies are studies of actions after safety accidents or simply monitoring. In this paper, the safety equipment was introduced before safety accidents occurred, and the subjects could be managed not only by workers but also by visitors. Also, it implements a system to prevent the accident by detecting the user's motion and situation periodically before a safety accident occurs. The implemented system is a system that attaches the device for safety management to the hard hat and can identify the safety situation by using the Bluetooth beacon device attached to the user's smartphone and the industrial site.