• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.62-68
• /
• 2009

Life Cycle Cost(LCC) is adopted to decide the target of safety level in designing suspension bridges. The LCC are evaluated considering two types of uncertainty; aleatory and epistemic. The nine alternative designs of suspension bridge are simulated to decide the safety level which can minimize the LCC. The LCC is calculated through the probability of failure and safety index including the uncertainty. This method results in the useful tool deciding the optimum safety level with minimal LCC as the main design factor.

• Journal of the Korean Society of Safety
• /
• v.26 no.1
• /
• pp.43-48
• /
• 2011

Estimation of accident costs would set a sound criterion on which invest judgement for work improvement would be decided. Unfortunately, however, the professional agency and most companies in Korea still adopt the conventional cost estimation method based on Heinrich's theory would not be applicable any more since it was developed about a century ago. This research was carried out to confirm the validity of conventional accident cost estimation method. With 110 accident cases occurred in an autoglass manufacturing plant for last 7 years, post-accident treatment procedure was simplified as a model with several phases, and practical costs were analyzed case by case. The results showed that, as expected, the company should the largest portion of loss due to accidents, and that mean indirect cost were 10.10(${\pm}20.70$) times as much as direct cost estimated by conventional method. Therefore, finally, accident types and items influenced much on accidents costs were analyzed and discussed.

• Journal of the Korean Institute of Gas
• /
• v.8 no.3 s.24
• /
• pp.37-42
• /
• 2004

This study established a catastrophic scenario and a likely scenario by qualitative and quantitative risk assessments to consider climate condition with season, and assessed efficiency of safety management cost with scenarios by cost-benefit analysis. As results, the catastrophic scenario was the maintenance error for unsteady state operation, and the likely scenario was the gas release accident at node $\sharp$4 of HAZOP Also, benefit/cost ratios for total safety management cost and effective items of safety management could be assessed at each scenario.

• Journal of KIBIM
• /
• v.11 no.3
• /
• pp.34-44
• /
• 2021

This study quantitatively analyzes the work performance of the structural safety diagnosis team that diagnoses pipe racks. To this end, a method for evaluating the performance of the structural safety diagnosis team using the queuing model was proposed. For verification, the case of applying the existing method and the method of introducing a 3D laser scanner for one site was used. The period, number of people, and initial investment cost of each project were collected through interviews with case project experts. As a result of analyzing the performance of the structural safety diagnosis team using the queuing model, it was possible to confirm the probability of delay in the work of each project and the amount of delayed work. Through this, the cost (standby cost) when the project was delayed was analyzed. Finally, economic analysis was conducted in consideration of the waiting cost, labor cost, and initial investment cost. The results of this study can be used to decide whether to introduce 3D laser scanners.

• Journal of the Korean Society of Safety
• /
• v.25 no.4
• /
• pp.84-89
• /
• 2010

In Korea, the method of assessing uninsured costs is not adopted in a direct way, but in an indirect way on the basis of the insured cost. From this method, the cost of accidents can be approximately calculated, but accurate calculation of uninsured costs is not easy. Therefore, a better method of assessing uninsured costs caused by industrial accidents is necessary. In this study, the system program and database for assessing uninsured costs from industrial accidents were developed on the basis of the results of previous studies. This program and database could quantitatively assess uninsured costs more accurately and quickly than other studies. This system would contribute to the efficient analysis of industrial accident costs.

• Journal of the Korean Society of Safety
• /
• v.27 no.6
• /
• pp.1-6
• /
• 2012

This study focuses on the benefit-cost analysis of certification of more than eight hundred devices and equipments used primarily in farm work. Specifically, EPA-suggested averting behavior approach was used for the analysis. Cost-benefit analysis indicates that there will be a net cost of 30 billion won for the first year since the introduction of the certification system. It is expected, however, that net benefit of 568 billion won after 11 years and the accumulated net benefit will reach to 3,867 billion won. These results validate the introduction of safety certification systems for devices and equipments used in farm work sites.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.04a
• /
• pp.269-275
• /
• 2012

This study contain below two contents. First, this study analyse an effect of consciousness of the quality cost for quality cost activity. Second, this study analyse an effect of quality cost activity for productivity improvement. The empirical result of this study is meaning that quality cost consciousness effects productivity improvement by quality cost activity. Therefore, this paper emphasize consciousness of quality cost for productivity improvement.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.5
• /
• pp.9-18
• /
• 2005

This study delivers the actual condition of investment for industrial accident prevention based on survey of 526 construction sites. The various research techniques were used such as technical statistic analysis for construction industry, construction and civil engineering works, cost comparison of industrial accident prevention and accident loss. A formula was deduced to calculate accident loss and accident frequency by accident prevention cost through regression analysis.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.5
• /
• pp.19-30
• /
• 2005

This study delivers the actual condition of investment for industrial accident prevention based on survey of 526 construction sites. The various research techniques were used such as technical statistic analysis for construction industry, construction and civil engineering works, cost comparison of industrial accident prevention and accident loss. A formula was deduced to calculate accident loss and accident frequency by accident prevention cost through regression analysis.

• Journal of the Korean Institute of Gas
• /
• v.7 no.3 s.20
• /
• pp.1-6
• /
• 2003

This study has suggested a decision method which determine optimum investment level for safety management by process risk assessment at gas governor station. Hazard and operability study(HAZOP), fault tree analysis(FTA) and consequence analysis(CA) were carried out and potential accident cost and benefit for safety management were estimated. As a result, we could be found the trend of safety cost and benefit by the nonlinear regression method and could be determined the optimum investment level for safety management from analysis of safety management cost and potential accident cost.