본 연구의 대상은 도로 폭이 좁은 시가지에서 굴착공사 시 적용되는 장지간 주형의 연결부이다. 일반적으로 적용되고 있는 연결부에서 상부 플랜지의 단차와 피로균열 등의 문제로 연결부의 신뢰도가 저하된다. 연결부의 결함을 보완하고 안전성을 향상시킨 개선형 연결부를 개발하였다. 유한요소 기반의 상용프로그램(ABAQUS)를 이용하여 개선형 연결부의 거동을 평가하였다. 먼저, 개선형 연결부에 적용되는 고장력 볼트 연결 및 강재와 콘크리트의 합성거동을 구현하기 위한 수치해석 방법을 제안하였다. 비교논문의 실험결과와 수치해석 결과의 비교를 통하여 개선형 연결부를 해석하는데 있어 수치해석 방법의 적합성을 검증하였다. 본 연구에서 제안하는 수치해석 방법을 적용하여 개선형 연결부와 일반형 연결부가 적용된 장지간 주형을 해석하였다. 장지간 주형의 탄소성 거동과 연결부의 응력분포를 수치 해석적으로 비교분석하였다. 개선형 연결부의 도입으로 25%의 압축응력이 감소되며 구조적 성능 개선효과 및 안전성을 확인하였다.
In the various fields of Civil Engineering, shear modulus is very important input parameters to design many constructions and to analyze ground behaviors. In general, a shear wave velocity profile is decided by various experiments before constructing a structure and, analysis and design are carried out by using decided shear wave velocity profile of the site. However, if civil structures are started to construct, the shear wave velocity will be increased more than before constructions because of confining pressure increase by the load of structure. The evaluation of the change in shear wave velocity profile is used very importantly when maintaining, managing, reinforcing and regenerating existing structures. In this study, a non-destructively geotechnical investigation method by using the HWAW method is applied to an evaluation of change in properties of the site according to construction. Generally, the space for experiments is narrow when underground of existing or on-going structures is evaluate, so a prompt non-destructive experiment is required. This prompt non-destructive experiment would be performed by various in-situ seismic methods. However, most of in-situ seismic methods need more space for experiments, so it is difficult to be applied. The HWAW method using the Harmonic wavelet transforms, which is based on time-frequency analysis, determines shear wave velocity profile. It consists of a source as well as short receiver spacing that is 1~3m, and is able to determine a shear wave velocity profile from surface to deep depth by one test on a space. As the HWAW method uses only the signal portion of the maximum local signal/noise ratio to determine a profile, it provides reliability shear modulus profile such as under construction or noisy situation by minimizing effects of noise from diverse vibration on a construction site or urban area. To estimate the applicability of the proposed method, field tests were performed in the change of geotechnical properties according to constructing a minimized modeling bent. Through this study, the change of geotechnical properties of the site was effectively evaluated according to construction of a structure.
Objectives: The purpose of this study was to perform an aggregate human risk assessment for benzene in an industrial complex using the CalTOX model and to improve the reliability and predictability of the model by analyzing the uncertainty and sensitivity of the predicted assessment results. Methods: The CalTOXTM 4.0 beta model was used to evaluate a selected region, and @Risk 7.6 software was used to analyze uncertainty and sensitivity. Results: As a result of performing the aggregate risk assessment on the assumption that 6.45E+04 g/d of benzene would be emitted into the atmosphere over two decades, 3% of the daily source term to air remained in the selected region, and 97% (6.26E+04 g/d) moved out of the region. As for exposure by breathing, the predicted LADDinhalation was 2.14E-04 mg/kg-d, and that was assessed as making a 99.99% contribution to the LADDtotal. Regarding human Riskcancer assessment, the predicted human cancer risk was 5.19E-06 (95% CI; 4.07E-06-6.81E-06) (in the 95th percentile corresponding to the highest exposure level, a confidence interval of 90%). As a result of analyzing sensitivity, 'source term to air' was identified as the most influential variable, followed by 'exposure time, active indoors (h/day)', and 'exposure duration (years)'. Conclusions: As for the results of the human cancer risk assessment for the selected region, the predicted human cancer risk was 5.19E-06 (95% CI; 4.07E-06-6.81E-06) (in the 95th percentile, corresponding to the highest exposure level, a confidence interval of 90%). As a result of analyzing sensitivity, 'source term to air' was found to be most influential.
본 논문에서는 S-밴드 군용 레이더에 사용되고 기존의 TWTA를 대체하기 위해 GaN HEMT 기반 증폭모듈을 이용하여 개발한 2kW급 반도체증폭기(SSPA)를 제안하였다. 제안한 SSPA는 8개의 증폭모듈로 이루어진 고출력증폭모듈, 구동증폭모듈, 제어모듈 및 전원공급 장치로 이루어져 있다. 제안한 SSPA는 1) 증폭모듈과 구성부품은 공간적 제약으로 작은 패키지에 통합설계 되었으며, 2) PCB 내장형 하모닉필터를 이용하여 고주파를 제거하였으며, 그리고 3) 입력신호의 듀티 변화에 대응하여 일정한 출력이 유지되도록 하는 자동이득조절기를 설계하였다. 제안된 SSPA는 최대 48 dB의 이득과 3.1~3.5 GHz의 주파수 대역에서 63-63.6 dBm의 출력 전력을 보였다. 자동이득조절 기능은 15-20 dBm의 입력전력 변동에도 대해서, 출력전력이 63dBm 전후로 일정하게 유지하는 것을 확인하였다. 마지막으로 MIL-STD-810의 시험기준을 만족하는 높은 (55 ℃) / 낮은 (-40 ℃) 온도시험 프로파일을 이용한 온도시험을 통해 개발된 시스템의 신뢰성을 검증하였다. 개발된 SSPA는 경량, 고출력, 고이득, 안전기능, 낮은 수리비, 짧은 수리시간 등 측면에서 기존의 TWTA 증폭기보다 우수한 것을 확인하였다.
Purpose: This study was carried out in order to examine the relationship of job satisfaction and social support on the dental technicians and to analyze its influence. Methods: A self-reported questionnaire survey was carried out by having convenience sampling as 220 dental technicians who work in Seoul Metropolis, Gyeonggi-do Province, Daejeon and Chungnam Province. A research tool was used questionnaire that was proved reliability and validity. It was prepared with totally 37 questions such as 12 items for subjects' general characteristics, 18 items for job satisfaction measurement, and 7 items for social support measurement. An analysis of the collected data was computationally processed by using SPSS Win 17.0 program. An analytical technique was made by using statistical techniques such as frequency & percentage, T-test or One-way ANOVA analysis. The following are the analytical results of the collected materials. Results: As a result of analyzing research subjects' job satisfaction level, there was significant difference(P<0.05) in items of religion, hobby life, working environment, and rest time out of daily work. The whole mean in job satisfaction was indicated to be relatively high with 3.13. However, job satisfaction with social recognition, salary, and safety was indicated lowly. As a result of analyzing research subjects' social support level, there was significant difference(P<0.05) in items of age, working environment, and rest time out of daily work. The whole mean in social support was indicated to be relatively high with 3.49. As a result of analyzing correlation between job satisfaction and social support, all variables were indicated to be positive correlation in high significance level, thereby having been indicated that the higher job satisfaction leads to the higher social support. Conclusion: As a result of this study, there is high correlation between social support and job satisfaction. An effort and a support are considered to be necessary for forming positive personal relations among members such as relationship with family member and with fellow employee, for improving the working conditions, and for enhancing dental technicians' pride and social recognition in order to promote dental technician's job satisfaction.
The purpose of this study is to make an empirical analysis on the factors affecting the intention for the continuous use of the BSC system, which has been recently spread in the public sector. Because the object of acceptance is the performance management system based on BSC (Balanced Scorecard) implemented in the form of information systems, this study proposes a research model by applying TAM (Technology Acceptance Model). Independent variables are factors affecting the acceptance of BSC system such as training, communication, IS support, CEO support and personal innovativeness, and we examine their effects on the dependent variable, namely, intention on continuous use via mediating variables: perceived usefulness and perceived ease of use. A questionnaire survey was conducted with public institutions(firms) that had introduced and were operating the BSC system; 264 valid questionnaires are adopted. Collected data are analyzed using SPSS 16.0 and AMOS 7.0. Results of reliability test show that all analyzed data are reliable. In validity test, one item regarding communication was excluded; 9 latent variables and 34 observed variables are used in the final analysis. Based on the results of the hypothesis test through path analysis using a structural equation model, 10 out of 16 hypotheses are accepted. Factors affecting perceived usefulness are training and IS(Information System) support. The analysis results indicate that perceived ease of use is mainly affected by IS support, CEO support, and personal innovativeness among the factors related to the acceptance of the BSC system. This suggests that, contrary to the expectation that the BSC system may be used without difficulty, the management's active support is required in order to attain expected improvement in productivity and work efficiency. This was also pointed out in case studies on the construction of the BSC system in public sectors. On the other hand, perceived ease of use is found to affect perceived usefulness. This supports the results of previous researches on TAM. Perceived ease of use and perceived usefulness are found to affect the attitude towards the use of the system. The intention on continuous use is affected more by perceived usefulness than by the attitude towards the use of system. This result supports the results of previous researches on TAM, showing that the BSC system is utilized substantially in worksites. This study is considered meaningful in that it was actually performed on users at public institutions(firms) that had introduced the BSC system and that it empirically tested hypotheses on the acceptance of the BSC system by applying TAM to the research model.
LIDAR는 정밀 측정이 가능한 특성을 기반으로 정확한 정보 획득과 고해상도 3차원 영상 구현에 유리하기 때문에 사용자의 개입 없이 정확한 정보 획득과 판단이 요구되는 자율 주행 시스템에 필수적으로 적용되고 있다. 최근 LIDAR를 접목한 자율 주행 시스템이 인간의 생활권 안에서 활용되면서 시각안전 문제에 대한 해결과 함께 다양한 환경에서 정확한 장애물 인식을 통한 신뢰성 있는 판단이 요구되고 있다. 본 논문에서는 1550 nm 시각안전 광원을 활용한 Single-Shot LIDAR system (SSLs)을 구성하고 다양한 측정 환경, 반사 물질, 물질의 각도에 대한 LIDAR 신호 분석 방법과 결과를 보고한다. 실내, 주간, 야간의 환경에서 25 m 거리에 위치한 5% 알루미늄 반사판과 건물 벽을 활용하여 각 측정 환경에서 반사율이 다른 물질에 대한 신호를 분석하고, 다양한 각도를 갖는 실제 장애물을 고려하여 반사 물질의 각도 변화에 대한 신호 분석도 진행하였다. 이러한 신호 분석은 수신 정보의 신뢰도 판별을 위한 SNR과 거리 정보 정확성의 지표인 타이밍 지터를 활용하여 측정 환경 및 반사 조건과 LIDAR 신호 간의 상관관계 확인이 가능한 장점이 있다.
By means of microsurgical free-tissue transfer providing a large amount of required tissue, the surgeon can resect tumoral tissue more safely, which allows tumor-free margins and enhances the reliability of the ablative surgery that otherwise could not be performed radically. The morbidity of elective free-tissue transfer seems to be quite low, carrying acceptable risks for most patients. But the elderly patients are at risk for cardiac and respiratory problems, deep vein thrombosis, pulmonary emboli and infection merely as a function of age. This study was undertaken to define further risks of the elderly population with regards to free-tissue transfer. We retrospectively reviewed our experience with 110 microsurgical free-tissue transfers for head and neck reconstruction in patients greater than 60 years of age. Microsurgical procedures in all cases were preformed by the plastic and reconstructive department at Yonsei medical center. The investigated parameters were patient demographics, past medical history, American Society of Anesthesiologists(ASA) status, site and cause of defect, the free tissue transferred and postoperative complication including free-flap success or failure. There were 46 patients in the age group from 60 to 64 years, 34 patients from 65 to 70 years, and 30 patients 70 years or older. There happened 3 flap losses, resulting in a flap viability rate of 97%. Patients with a higher ASA designation experienced more medical complication(p=0.05, 0.01, 0.03 in each age group I, II, III) but not surgical complication p=0.17, 0.11, 0.54 in each age group I, II, III). And the relationship between postoperative complication and age groups was not significant. These observations suggest that major determinant for postoperative medical complication be the patient's American Society of Anesthesiologists score, and chronologic age alone should not be an exclusion criterion when selecting patients for free-tissue transfer
콘크리트 충전강관 기둥은 강관의 구속효과에 의해 콘크리트의 압축내력 상승과, 콘크리트에 의한 강관의 국부좌굴 보강효과에 의해 부재내력이 상승하고 뛰어난 변형성능을 발휘한다. 하지만, 기둥단면이 커질 경우 합성효과를 발휘하기 위하여 스터드 볼트나 후 시공 앵커 볼트를 사용해야 하는 시공상의 문제점이 발생된다. 이를 극복함과 동시에 합성효과를 증대시키기 위한 방안으로 내부에 리브가 설치된 용접조립 기둥이 소개되었다. 내부 리브는 콘크리트와 맞물려 있어 리브의 변형은 콘크리트의 균열을 촉진시키는 역할을 동반하게 된다. 이러한 잠재적인 문제에 대한 해결책은 강관 리브의 변형에 저항할 수 있도록 콘크리트 인성을 증가시킬 수 있는 방안이 필요하다. 언급된 두 가지의 문제점이 효과적으로 해결될 경우 용접조립 각형강관 기둥은 내화성능 확보가 가능하다고 판단된다. 본 연구에서는 해결방안으로 내부 콘크리트를 강섬유와 혼입하여 기둥 자체의 연성과 인성을 증대시키는 것에 중점을 맞추고 있다. 내화성능 평가를 위한 시험체는 총 8개 로 하중비에 따른 재하가열 실험을 실시하고 화재 전후 거동과 열 변형 능력을 주요변수별로 분석하였다. 실험결과와 선행연구 비교를 통해 열 전달과 열응력 해석 모델의 신뢰성을 확보하였으며, 강섬유 혼입율에 따른 변수해석을 수행하였다.
개방형 기화기는 해수를 이용하여 열교환을 수행함으로써 액체상태의 액화천연가스를 천연가스로 기화시키는 역할을 한다 86년부터 가동된 U-tyre 기화기는 천연가스생산과 관련된 중요설비 중 하나로서, 기화기 튜브는 항상 해수내에서 운전되고 있으며 기화기 튜브와 파이프사이의 용접부에서 해수로 인한 부식이 진행되고 있다. 본 연구에서는 용접부에서의 국부적인 부식원인을 찾기 위해 이종금속부식의 가능성을 평가해 보았으며 또한 비파괴적인 방법을 이용하여 부식피트의 깊이를 측정하고 유한요소를 통한 안전성 평가에 목적을 두었다. 이종금속부식가능성에 대하여 용접부 각 부위별로 시료를 채취하여 3.5$\%$(wt.) NaCl 용액내에서 모재와 용접부위의 부식전위를 측정하였으며, 비파괴 검사를 통한 잔류두께측정은 tangential radio-graphy 시험이 가장 신뢰성 있는 기법임이 확인되었다. 미세한 부식피트가 발생된 경우에는 표면형상 복제기법을 적용하였다. 비파괴적인 방법을 이용하여 산출된 부식피트의 깊이와 형상을 근거로 2차원 유한요소 해석을 수행함으로써 내압으로 인한 기화기 튜브의 안전성을 평가할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.