• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.515-522
• /
• 2005

The ship plating is generally subjected to. combined in-plane load and lateral pressure loads, In-plane loads include axial load and edge shear, which are mainly induced by overall hull girder bending and torsion of the vessel. Lateral pressure is due to. water pressure and cargo. These load components are nat always applied simultaneously, but mare than one can normally exist and interact. Hence, far mare rational and safe design of ship structures, it is af crucial importance to. better understand the interaction relationship af the buckling and ultimate strength far ship plating under combined loads. Actual ship plates are subjected to relatively small water pressure except far the impact load due to. slamming and panting etc. The present paper describes an accurate and fast procedure for analyzing the elastic-plastic large deflection behavior up to. the ultimate limit state of ship plates under combined loads. In this paper, the ultimate strength characteristics of plates under axial compressive loads and lateral pressure loads are investigated through ANSYS elastic-plastic large deflection finite element analysis with varying lateral pressure load level.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.269-274
• /
• 2004

The marine electronic system for safe navigation such as ECDIS has been contributing to increase the safety of navigation, decreasing the mariner's load of navigation. The ECDIS should be developed and approved by international standard of IMO for performance standard and IEC for type-approval method and required results. However, these standards have some ambiguities for us not to directly adopt them for real approval system, so we should analyze them for more clear meaning and prepare our own detail standard for type-approval system. The first thing to do for the goal of this research was to analyze the standard in detail and make ambiguity be cleared in our own standards, considering each test item in view of test methodology. For the result of analysis we could develop more evident and detail type-approval standard for each test item with test technology needed. Especially, we developed the colour differentiation test process of ECDIS monitor, which include the colour differentiation formula derived from CIE colour scheme. Several test items require sensor informations of navigation equipment compatible with IEC 61162. We also developed the signal simulator for general messages of IEC 61162 that must be provided. Additionally, the type-approval processes and standards for Back-up arrangement and RCDS mode were developed.

• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.851-856
• /
• 2012

There has been increasing the possibility of occurring the marine accident and become bigger the extent of damage with the growing number and high speed of ships. Also, there were tremendous loss of lives and properties in accidents of Hebei spirit in 2007 and Cheon Ahan war ship in 2010 with the insufficient salvage response and the lack of emergency response systems. When a ship has suffered an incident, the best way of preventing damage or pollution from its progressive deterioration would be to providing a place of refuge and to repair the damage rapidly. Therefore, it was examined the recent collision accident broken out near the Nam-Hae, and then suggested that it was necessary to be improved of the domestic salvage systems. It requires the procedures of providing a place of refuge, and the towing support system which make the damaged ship moved to the safe area, and joining of the ISU.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.61-67
• /
• 2005

The ship plating is generally subjected to combined in-plane load and lateral pressure loads. In-plane loads include axial load and edge shear, which are mainly induced by overall hull ginder bending and torsion of the vessel. Lateral pressure is due to water pressure and cargo. These load components are not always applied simultaneously, but more than one can normally exist and interact. Hence, for more rational and safe design of ship structures, it is of crucial importance to better understand the interaction relationship of the buckling and ultimate strength for ship plating under combined loads. Actual ship plates are subjected to relatively small water pressure except for the impact load due to slamming and panting etc. The present paper describes an accurate and fast procedure for analyzing the elastic-plastic large deflection behavior up to the ultimate limit state of ship plates under combined loads. In this paper, the ultimate strength characteristics of plates under axial compressive loads and lateral pressure loads are inverstigated through ANSYS elastic-plastic large deflection finite element analysis with varying lateral pressure load level.

• Journal of Navigation and Port Research
• /
• v.35 no.10
• /
• pp.823-827
• /
• 2011

The present Common Structural Rules for double hull oil tanker is not included the residual strength, which is one of the functional requirements in design part of Goal-based new ship construction standards (GBS). The GBS will be enforced after July 1, 2016. The requirement related residual strength has the goal to build safe ship even if she has the specified damages due to marine accidents including collision and grounding. In order to assess the residual strength based on risk for structural damages according to GBS, tons of nonlinear FE analysis work taking into account various types of damage will be needed. The Smith's method, a kind of simplified method for the strength analysis is very useful for this purpose. In this paper, the residual strength assessments based on ultimate strength using Smith's method were carried out. The objected ship is VLCC with stranding damage in bottom structures. Also, the results were compared with that of nonlinear FE analysis using three cargo hold model.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.69-70
• /
• 2013

IPCC (International Panel on Climate Change) reported that the arctic sea-ice extent has been decreased by 2.7% per decades since satellite observations in 1978. The decreased sea-ice extent has gained an international attention due to its economical benefits from the NSR (Northen Sea Route). The NRS - not a clearly defined single route, but a number of alternative routes across the top of Russiahas a 37 % reduction in sailing distance, comparing to the SSR (Southen Sea Route) passing thourgh the Suez Canal. Sailing days are consequently reduced from 30 days to 20 days. Also, it is estimated that the Northen Sea has 20 to 25% of world's oil resources and occupies 40% of the world's fishery production. As Republic of Korea was admitted as an observer to the Arctic Council on May 15, 2013, there has been increasing needs to explore new route in the Northen Sea. In this situation, Korea Institute of Ocean Science & Technology (KIOST) is preparing a plan for the development of Arctic-circle Ocean Environmental Information System to support the ice navigation and resource exploration in the Arctic. We will introduce a conceptual design of a satellite-based ice navigation supporting system for the northern sea route.

• Journal of Korea Port Economic Association
• /
• v.33 no.1
• /
• pp.1-10
• /
• 2017

The dynamic nature of mechanization and automation to improve productivity and safety within logistics centers, has necessitated various studies to support efficient and safe working conditions for workers. However, accidents in the loading dock occur frequently as workers and forklift trucks operate within the same space. This research introduces cargo batch loading and unloading systems, which enable increasing productivity and safety through the use of mechanization and automation in the loading dock. To assist efficient operation of this new system, four pieces of general-purpose equipment or three pieces of dedicated equipment are deemed to be essential. Moreover, the floor area of the loading dock is designed to accommodate $256.28m^2$ and $207.00m^2$ for the general-purpose and dedicated systems respectively, in addition to the space allocated for equipment and additional space. The design of the loading dock considers the area of the loading dock as well as the cargo batch loading and unloading systems. Economic analysis, such as NPV, IRR, and PBT, were conducted in addition to sensitivity analysis on key variables.

• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.112-119
• /
• 2002

In accordance with the development plans of Jeju for international free city, Jeju new harbor will be constructed cosidering supporting Jeju city as an international tour city, safe arrival and departure at the terminal of 80.000G/T cruise ship. In this study, we used a full-mission ship handling simulator adopting 80.000G/T cruise ship manoeuvered at the planned Juju international cruise terminal. Five masters who have had a long experience of shop maneuvering ware called to carry out the simulations of which No. 1 , Np. 2, and No.4 scenario of simulation were tried twice, completed the total of 10 times and No.3 scenario of simulation once, reached at the total of 5 time. The marine traffic safety was assessed in terms of 1) the closest point of approach(CPA) to breakwater and quay in the vicinty and the probability of crossing fairway limit, 2)subjective evaluation such as the mental burden and the maneuvering disfficulty of shiphanders and 3) the opinions of shiphandlers. From th result of this simulation, we have a conclusion that the 80.000G/T cruise ship can be maneuvered safely at the planned terminal.

• Journal of Navigation and Port Research
• /
• v.37 no.5
• /
• pp.519-526
• /
• 2013

In managing shipping business, the concept of seaworthiness of the vessel has developed in accordance with the development of the shipping industry. However, despite of the development of the vessel's seaworthiness, marine accident has continuously occurred at sea. International Maritime Organization(IMO) has paid attention to the research and investigation of Human Error in shipping operations in addition to physical seaworthiness of the vessel. In 1994, IMO adopted the "International Management Code for the Safe Operation of Ships and for Pollution Prevention(ISM code)" of "SOLAS 1974" Annex, to take countermeasure against this human error. In 1999, Korea adopted the 'ISM Code' and then enacted the Maritime Safety Act (previously Maritime Traffic Safety Act). The Maritime Safety Act regulates necessary qualifications of the Human Resources of shipping companies for establishment and implementation of the safety management system. However, there has been a discrepancy between shipowners and ship management companies in interpreting the legislative texts, finally causing confusion. In this paper, I would like to examine the deficiencies in the regulation on the standard of qualifications of the Designated Person under the Maritime Safety Act and thereby suggest any possible improvements in it.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.145-157
• /
• 2017

Currently, the height of ships that can pass under Busan Harbor Bridge is limited to 60m or shorter, so that large-sized ships of 60m or taller cannot use Busan Harbor international passenger terminal. Accordingly, this study has developed a service which measures continuously the change of bridge height by water level changes and provides such in real-time for safe bridge passage of large-sized ships of 60m or taller. The measurement system comprised of high-precision laser distance measurement device, GPS sensor, optical module, and damping structure is used to measure the bridge height change according to tide level changes, and the measured information is provided in real-time through cloud-based mobile app. Also, in order to secure objective bridge height data for changes to height limits and navigation supports, the observation data was analyzed and forecast model was drawn. As a result, it became an objective evidence to revise the passage height rules of the Busan Port Bridge from 60 meters to 63 meters.