• Defense and Technology
• /
• no.2 s.192
• /
• pp.48-55
• /
• 1995

최근 러시아는 무기의 해외판매에 주력하고 있으며, 이의 일환으로 '93년에 무기전시회와 에어쇼를 통해 여러 종류의 무기를 공개전시하였으나 기술적 내용과 특징은 잘 알려져 있지 않다. 이 글에 소개된 내용은 S-300V, S-300 PMU, TOR 등 대공유도무기용 위상배열레이다를 중심으로 하여 우리 군과 방산종사자들의 관심이 많은 대공방어체계용 레이다 관련 자료를 모으고 기술적인 해석을 하였다.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.471-474
• /
• 2004

Not all CCD pixels generate uniform value for the uniform radiance due to the different process of manufacture and each pixel characteristics. And the image data compression is essential in the real time image transmission because of the high line rate and the limited RF bandwidth. This pixel's nonuniformity and the loss compression make CCD pixel correction necessary in on-orbit condition. In the MSC system, the NUC unit, which is a part of MSC PMU, is charge of the correction for CCD each pixel. The correction is performed with the gain and the offset table for the each pixel and the each TDI mode. These correction tables are generated and programmed in the PMU Flash memory through the various image data tests at the ground test. Besides, they can be uploaded from ground station after onorbit calibration. This paper describes the principle of the table generation and the test way of the non-uniformity after NUC

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1262-1266
• /
• 1999

More precise operation and control is required to ensure the stability and security of modern large power systems that is a complicated and widely dispersed structure. To ensure the precise operation and control of modern power system, most of all, precise monitoring and measurement of the various state values of power system is required. This paper discusses phasor measurement unit using synchronization signals from the GPS satellite system- Synchronized Phasor Measurement Unit. Considering the power system operation state, the transmitting data format over modems is defined. To provide all available information, PMU process the measurements to generate three phase symmetrical component. This paper proposes the transmitted data format and implements the PMU model using EMTP/Models. The validity of proposed model is confirmed through several contingency on the simple power system.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.6
• /
• pp.9-16
• /
• 2017

In this paper, we proposed a novel user-level scheduling scheme that monitors applications characteristics on-line using PMU and allocates applications into cpu cores. We utilize PMU (Performance Monitoring Unit) to analyze which shared resource has the strongest relation with the influence. Using the proposed scheduling method, it is possible to reduce the contention of shared resources. The key idea of this scheme is separating high-influential applications into different processors. The evaluation results have shown that the proposed scheduling scheme can enhance the performance up to 12% for a 8 core system and up to 25% for a 28 core system, respectively.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.89_90
• /
• 2009

근래 주파수 편이를 모니터링 함으로서 광역정전 예방을 도모하려는 GPS 기반 FNET에 대한 연구가 시도되고 있다. 본 연구에서는 PMUs와 FNET에 대하여 살펴본 후, FNET에 적용 가능한 주파수 추정 알고리즘을 비교하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1660-1671
• /
• 2013

In this paper two types of power management circuits for solar energy harvesting self-powered systems are proposed. First, if the output voltage of a solar cell is enough to drive load, a power management unit(PMU) directly supplies load with solar energy. Second, if a solar cell outputs very low voltage less than 0.5V as in miniature solar cells or monolithic integrated solar cells such that it cannot directly power the load, a voltage booster is employed to step up the solar cell's output voltage, and then PMU delivers the boosted voltage to the load. The proposed power management systems are designed and fabricated in a $0.18{\mu}m$ CMOS process, and their performances are compared and analyzed through measurements.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.229-234
• /
• 2002

Under the hostile influence of the extreme space environmental conditions due to the deep space and direct solar flux, the thermal control in space applications is especially of major importance. There are tight temperature range restrictions for electro-optical elements while on the other hand there are low power consumption requirements due to the limited energy sources on the spacecraft. So, we usually have strong requirement of thermal and power control module in space applications. In this paper, the design concept of a thermal and power control module in the MSC(Multi-Spectral Camera) system which will be a payload on KOMPSATII is described in terms of H/W & S/W. This thermal and power control module, called THTM(Thermal and Telemetry Module) in MSC, resides inside the PMU(Payload Management Unit) which is responsible for the proper management of the MSC payload for controlling and monitoring the temperature insides the EOS(Electro-Optic System) and gathering all the analog telemetry from all the MSC sub-units, etc. Particularly, the designed heater controller has the special mode of "duty cycle" in addition to normal closed loop control mode as usual. THTM controls heaters in open loop according to on/off set time designed through analysis in duty cycle mode in case of all thermistor failure whereas it controls heaters by comparing the thermistor value to temperature based on closed loop in normal mode. And a designed THTM provides a checking and protection method against the failure in thermal control command using the test pulse in command itself.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1081-1083
• /
• 2003

The CC's main objective is to manage and control the various operation of the MSC camera. The CC has capability to control the various camera operation modes such as INIT mode, WAIT mode, STANDBY mode, READY IMAGING, DEFAULT READY IMAGING, IBIT and IMAGING mode as well as to manage the interface of the PMU. This paper also shows not only the design concepts in the both of the hardware and the operational software, but also the implementation results for the various CC functions.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2023-2024
• /
• 2008

근래 초기고장(seed fault)에 대한 적절치 못한 대책들이 광역정전으로 파급되어 그 피해정도가 매우 심각하다. 전력의 안정적 공급에 대한 중요성이 새롭게 부각되고 그 예방책에 대한 다각적인 연구가 요구되고 있다. 이에 위성망을 이용한 위기 관리시스템에 대한 필요성이 제기되었다. 본 논문에서는 광역보호를 위해 sPMU(satellite Phasor Measurement Unit), 전력계통 상태감시장치(Power System Dynamic Monitor:PSDM)에 중요한 요소로서 전력계통에서 가장 중요한 지표중의 하나인 주파수에 대한 여러 가지 측정방법을 다룬다. 향후 정상상태와 과도상태에서도 측정시간 단축과 측정오차를 줄일 수 있는 최적의 주파수 계측기법을 개발하기 위함이다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.7
• /
• pp.119-125
• /
• 2012

This paper suggest the on-line coordination control between on-load tap changers and Switched Shunts for ensuring the voltage stability using local data obtained from one substation. Inappropriate control of on-load tap changers that are able to maintain voltage profile might cause unintended result that is harmful to system stability, especially voltage stability. This paper utilizes Z-index that could inform the whole system condition from only one substation data. Simulation is performed using the HYPERSIM that is a digital simulator and matlab simulink to confirm the proposed algorithm.