• 제목/요약/키워드: sMICA

검색결과 107건 처리시간 0.024초

석포(石浦)-덕구간(德邱間)에 분포(分布)하는 소위(所謂) 홍제사화강암(洪濟寺花崗岩)의 지질연대(地質年代)와 생성과정(生成過程)에 대(對)한 硏究(연구) (Geochronology and Petrogenetic processes of the so-called Hongjesa granite in the Seogpo-Deogku Area)

  • 김용준;이대성
    • 자원환경지질
    • /
    • 제16권3호
    • /
    • pp.163-221
    • /
    • 1983
  • Main aspects of this study are to clarify geochronology and petrogenetic processes of the so-called Hongjesa granite, which is a member of various intrusive rocks exposed in the northeastern part of the Ryongnam Massif, one of the Precambrian basements of South Korea. In this study, the Hongjesa grainte is divided into four rock units based on the geologic age, mineralogical and chemical constituents, and texture: the Precambrian Hongjesa granite gneiss (Hongjesa granite Proper) and leucogranite gneiss, the Paleozoic gnessic two mica granite, and the Jurassic muscovite granite. The Hongjesa granite gneiss is identified by its grayish color, slight foliation, and porphyroblastic texture. The leucogranite gneiss is distinct by its light gray color, sand medium to coarse grained texture. The gneissic two mica granite is distinguished from others by its strong foliation, containing gray-colored feldspar phenocrysts with biotite and muscovite in varying amounts. The muscovite granite occurs as a small stock containing feldspar phenocrysts along margin of the stock. These granitic rocks vary widely in composition, reflecting the facts that they partly include highly metamorphosed xenolith and schlierens as relics of magmatic and anatectic processes. In particular, grayish porphyroblasts of microcline perthite is characteristic of the Hongjesa granite gneiss, whereas epidote and garnet occur in both the Hongjesa granite gneiss and leucogranite gneiss. These minerals are considered to be formed by potassic metasomatism and contamination of highly metamorphosed rocks deeply buried under the level of the Hongjesa granite emplacement. The individual synchronous granitic rocks plotted on Harker diagram show mostly similar trends to the Daly's values. The plots of the Hongjesa granite gneiss and gneissic two mica granite concentrate near the end part of the calc-alkalic rock series on the AMF diagrams, whereas those of the leucogranite gneiss and muscovite granite indicate the trend of the Skaergaard pluton. These granitic rocks plotted on a Q-Ab-Or diagram (petrogeny's residua system) fall well outside the trough of the system. This can be attributed to the potassic matasomatism of these rocks. On the ACF diagram, these rocks appear to be dominantly I-type prevailing over S-type. The K-Ar ages, obtained from a total of 7 samples of the leucogranite gneiss, gneissic two mica granite, muscovite granite, porphyritic alkali granite, and rhyolitic rock, in addition to the Rb/Sr ages of the Hongjesa granite gneiss by previous workers, permit the rock units to be arranged in the following chronological order: The middle Proterozoic Hongjesa granite gneiss (1714-1825 m.y.), the upper proterozoic leucogranite gneiss (875-880 m. y.), the middle Paleozoic gneissic two mica granite (384 m. y.) the upper Jurassic muscovite granite (147 m. y.), the Eocene alkali granite (52 m. y.), and the Eocene rhyolitic rock (45 m. y.). From the facts and data mentioned above, it is concluded that the so-called Hongjesa granite is not a single granitic mass but is further subdivided into the four rock units. The Hongjesa granite gneis, leucogranite gneiss, and gneissic two mica granite are postulated to be either magmatic or parautochtonous, intrusive, and the later muscovite granite is to be magmatic in origion.

  • PDF

불소 함유 결정화유리에 관한 연구 (A Study on The Glass-Ceramics Containing Fluorine)

  • 박용완;현부성;김창렬
    • 한국세라믹학회지
    • /
    • 제29권10호
    • /
    • pp.815-821
    • /
    • 1992
  • The batches having excess SiO2 to tetrasilicic mica KMg2.5 (Si4O10)F2 were melted at 1450℃. The fabricated samples were heat-treated for the nucleation and the crystallization. The crystallized samples were investigated on several properties. The tetrasilicic mica composition with excess 10 wt% SiO2 was successful both in glassifying and in crystallizing. The optimum temperatures for the nucleation and the crystallization were 680℃ and 1000-1100℃, respectively. The mica and the cristobalite crystallines were identified after heat-treatment. The properties of the samples processed appropriately were as follows, bulk density 2.64g/㎤, thermal expansion coefficient ∼80×10-7/℃, Vicker's hardness ∼105 Kgf/㎟, bending strength ∼666Kgf/㎟, dielectric constant ∼11.1, tan δ 2.5%, volume resistivity 2.35×107∼1.3×1011{{{{ OMEGA }}cm, surface roughness 6.984㎛.

  • PDF

발전기 고정자 권선의 부분방전 특성을 이용한 절연진단 연구 (A Study on Insulation Diagnosis by Partial Discharge Spectroscopy of Generator Stator Winding)

  • 강동식;김용주;김길용
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1993년도 하계학술대회 논문집 B
    • /
    • pp.584-587
    • /
    • 1993
  • Mica, which have a good thermal and electrical characteristics, while will cleave easily at these layers. In order to bond mica materials soldily, mica/epoxy composite insulation materials were developed for generator stator winding. There are lots of problems such as delamination and partial discharge of these insulation materials caused by mechanical, electrical and thermal aging. Several experiments have been conducted in order to find the useful diagnostic parameters from the partial discharge phenomena by applying a new measurement techniques. this paper deals with the partial discharge pulse characteristics, which may be a useful diagnostic concept in predicting insulation condition of generator stator insulation materials. Long term insulation aging test shows that partial discharge phase angle an magnitude are identified as one of the main key techniques for insulation diagnosis on generator stator winding.

  • PDF

카본 발열체의 온도 및 전기적 특성에 관한 연구 (A Study on the Temperature and Electrical Characteristics of Carbon Heater)

  • 김진화;심규진;공태우;정효민;정한식
    • 동력기계공학회지
    • /
    • 제10권1호
    • /
    • pp.71-76
    • /
    • 2006
  • This paper aims to study several type heaters which are mica heater, film heater, quartz heater and rod heater and to get an temteraturel and electrical characteristics. These four type heaters have a merit in many fields than present electric heater with nichrome wire. Carbon and mica plate heater have higher heat efficiency and less electromagnetic waves. Also it has been reported that far infrared ray emission from this heater is good for our health. Additionally heating element is thin and lighter plate. For these reasons, they will be widely used to various application such as room-heating or manufacturing goods. Experimental result confirmed that when 220V current authorized, the temperature, electric current, electric power and the resistance rise to stationary state in early stage. Moreover, the temperatures and electric characteristics show a good stability.

  • PDF

복운모 화강암의 암석화학적 특징 : 청산, 인제-홍천, 영주 및 남원지역의 예 (Petrological Characteristics of Two-Mica Granites : Examples from Cheongsan, Inje-Hongcheon, Yeongju and Namwon areas)

  • 좌용주
    • 암석학회지
    • /
    • 제6권3호
    • /
    • pp.210-225
    • /
    • 1997
  • 청산, 인제-홍천, 영주 및 남원지역에 분포하는 복운모 화강암은 과알루미나질이며, 일반적으로 S-타입 및 티탄철석계열의 화강암류임을 나타내어, 지각물질로부터 유래된 마그마가 환원 환경에서 관입.고결하여 생성된 것이다. 인제-홍천과 남원 지역의 복운모 화강암은 각각 반상 흑운모 화강암과 높은 Ti/Mg 비의 흑운모 화강암으로부터 분화.파생된 잔류 마그마로부터 형성되었다. 청산과 영주지역의 복운모 화강암은 접촉하고 있는 반상 흑운모 화강암과, 화강섬록암과는 각각 성인적인 관련이 없을 것으로 판단된다. 남원과 영주지역 복운모 화강암은 비교적 물에 포화된 마그마로부터 형성되었고, 청산과 인제-홍천지역 복운모 화강암질 마그마는 물에 불포화 되었음이 나타난다. 한편, 물에 포화되었던 남원지역의 흑운모 화강암과 복운모 화강암에 있어 마그마 내의 물의 함량은 5.8wt.%이상으로 추정되고, 영주 목운모 화강암질 마그마의 경우 2.4~5.8wt.%정도의 물을 포함했을 것으로 생각할 수 있다. 인제-홍천과 영주지역의 복운모 화강암의 최소융해액 조성으로 구해지는 압력 (0.5~2kb)과 세립질 내지 극세립질의 암석 조직은 화강암질 마그마가 지각의 얕은 곳에서 관입.배태된 양상을 나타내며, 청산과 남원지역의 복운모 화강암의 경우 최소융해액 조성 압력(2~3 kb)과 세립~중립질 내지 조립질의 암석 조직으로부터 비교적 지하 심부에 관입.배태외었음을 알 수 있다. 화강암질 마그마의 고상선/백운모의 안정선의 교점으로부터 물에 포화된 마그마에서는 최소한 약 1.6kb (약 6km)이상의 압력에서 마그마기원의 1차 백운모가 정출될 수 있으며, 그 이하에서는 고상선 아래에서 교대작용으로 2차적인 백운모가 형성된다. 반면, 물에 불포화된 마그마에서 1차 백운모가 정출되기 위해서는 보다 놓은 압력이 요구된다. 백운모 형성에 대한 이 조건은 각 지역 복운모 화강암에 산출되는 백운모에 1차 백운모와 2차 백운모 양쪽이 나타남을 설명하기에 충분하다. 한편, 실험으로 구해진 백운모의 안정선의 적용에는 주의가 필요하고, 특히 순수한 합성 백운모 단성분을 이용한 실험의 경우 팔면체 배위에 Ti, Fe, Mg의 성분이 첨가됨에 따라 안정선이 높은 온도 영역으로 이동됨을 고려해야 한다.

  • PDF

소실모형주조용 도형재 특성에 미치는 충전재의 영향 (Effect of Refractories on Coating Material Properties in Evaporative Pattern Casting Process)

  • 최현진;오영근;전기찬;이승춘;이경환
    • 한국주조공학회지
    • /
    • 제17권6호
    • /
    • pp.569-576
    • /
    • 1997
  • Coating materials for Evaporative Pattern Casting (EPC) process have been developed to investigate the effect of refractories on coating material properties. Three types of developed and one foreign coating materials were used. The former designated as A, B, C and the latter named S.K. The refractory of coating material A is spherical shape of zirconia, and the ones of B, C and S.K. is flake shape of mica. Strength, permeability at room and elevated temperature, anti-sand attachability and carbon residuary were evaluated at each coating materials. Permeability measurement device for elevated temperature was also designed. The zirconia type of coating material had excellent permeability, on the other hand the mica type had good strength and anti-sand attachability. It was found that the refractories were not broken during casting, so permeability indicated same trend at both room and elevated temperature. Based on results, coating material contained small size of mica which is designated as B has the best combination for cast iron.

  • PDF

Electrical and Chemical Properties of Mica/Epoxy Composite Materials as Affected by Short-Time Aging

  • Kim, Hee-Dong
    • KIEE International Transactions on Electrophysics and Applications
    • /
    • 제3C권2호
    • /
    • pp.59-65
    • /
    • 2003
  • Electrical properties such as permittivity and tan$\delta$ of unaged (control) and aged (72 h at 18$0^{\circ}C$) mica/epoxy composites of 130 ${\mu}{\textrm}{m}$ thickness were measured and their surface conditions were characterized using scanning electron microscopy (SEM), Fourier transform infrared (FTIR), electron spectroscopy for chemical analysis (ESCA), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Both permittivity and tan6 of control specimens were higher than those of short-time aged specimens. FTIR results show a new peak at 1710 $cm^{-1}$ / for short-time aged specimens, originating from carbonyl group formed by the oxidation reaction during the aging process. ESCA results show that the binding energy at 532.9 eV representing the singlet state of oxygen ( $O_{1s}$) decreases by 13.7%, whereas that at 534.6 eV increases by 13.7%. Glass transition temperatures of control and short-time aged specimens are observed to be 95.4$^{\circ}C$ and 113.4$^{\circ}C$, which increase with the increase of aging time. TGA results indicate that the control specimens contain a smaller amount of volatile components than the short-time aged specimens.s.

초분광센서와의 상호교정을 통한 RedEdge-MX 다분광 카메라의 보정계수 산출 (Calculation of correction coefficients for the RedEdge-MX multispectral camera through intercalibration with a hyperspectral sensor)

  • 백승일;고수윤;김원국
    • 한국측량학회지
    • /
    • 제38권6호
    • /
    • pp.707-716
    • /
    • 2020
  • 원격탐사 분야에서 물체의 특성을 정략적으로 추정할 수 있는 분광센서에 대한 관심이 늘어나고 있으며, 특히, 최근 드론에 탑재하여 운영할 수 있는 경량 다분광 카메라의 활용이 주목받고 있다. 정량적 원격탐사를 위해서는 카메라 또는 센서에서 획득된 복사량의 정확도가 중요하지만, 저가의 다분광 카메라의 경우 복사정확도에 대한 독립적인 검증이 충분히 수행되지 않았다. 본 연구에서는 최근 농작물 모니터링, 식생 분석, 수질 분석 등에 다양하게 활용되고 있는 MicaSense사의 RedEdge-MX 카메라에 대한 복사 정확도 분석을 수행하였다. 미국 NIST 표준에 따라 교정된 초분광 센서인 TriOS RAMSES를 이용하여, RedEdge-MX 센서의 복사휘도 및 복사조도에 대한 상대 보정계수를 산출하였다. 분석결과, RedEdge-MX의 복사휘도는 밴드별로 RAMSES보다 5~16% 가량 낮게 나타났고, 복사조도 역시 1~20% 가량 낮은 것이 확인되었다. 본 연구에서는 RedEdge-MX의 관측값을 RAMSES에 상응하는 값으로 변환시키기 위한 보정계수를 1차 그리고 3차 회귀분석을 통하여 제공한다.

유성(儒城) 서북부(西北部) 우산봉(雨傘峰) 일대(一帶)에 분포(分布)하는 화강암(花崗巖) 복합체(複合體)의 암석학적(岩石學的) 연구(硏究) (Petrology of Granitic Complex Distributed in the Woosanbong area, northwestern part of Yuseong)

  • 김승호;이대성
    • 자원환경지질
    • /
    • 제14권3호
    • /
    • pp.123-142
    • /
    • 1981
  • Granitic complex in the Woosanbong area is composed of schistose granite, two-mica granite, biotite granite, porphyritic granite and pink feldspar granite in order of intrusion. In their boundary aspects, the gradational change between porphyritic granite and pink feldspar granite is observed in field relations. All the granites of the complex are classified to quartz monzonite by the modal compositions following Bateman's classification (1961) with the exception of pink feldspar granite which belongs to granite according to the petrographical classification. The first three granites are characterized by highly development of vein and/or lens-like pegmatites in their bodies, and two others contain green hornblende uniquely. These leucocratic two-mica granite shows an unusual character in ratio of muscovite to biotite 1: 0.7 to 1:13, and contains dominantly microcline. The content of muscovite varies in places in the field. Under the polarizing microscope it is revealed that the muscovite flakes occur as the products altered from biotite partly or completely, and it usually associates with chlorite flakes nearby. These features, therefore, suggests that biotite probably has been altered to muscovite and chlorite by hydration during deuteric processes. At the same stage, sericitization of plagioclase by the hydrolytic decomposition, and transformation of orthoclase to microcline may be taken place. Accordingly, it is obviously permissible to consider the two-mica granite as a kind of 'apo-granite' by deuteric alterations during the consolidation of magma.

  • PDF

Assessment of 23 kV Capacitive Coupler for On-line Partial Discharge Measurements

  • Jeong, J.Y.;Kang, D.S.;Sun, J.H.;Heo, J.C.;Park, C.H.
    • Journal of Electrical Engineering and Technology
    • /
    • 제4권1호
    • /
    • pp.123-130
    • /
    • 2009
  • The partial discharge (PD) measurement is a very effective method to assess the winding insulation condition of high-voltage machines, since most of the insulation failure processes are directly or indirectly caused by PD. On-line PD measurements, which can detect insulation defects of winding in the early stages on rotating machines in operation, have been accepted as the most important technique. The epoxy mica capacitive coupler is currently and extensively used for on-line detection of PD pulses of high-voltage rotating machines. To evaluate the feasibility of developing a capacitive coupler that is easier to manufacture at a lower cost compared to epoxy mica couplers, a 100pF capacitive coupler made of ceramic material is designed, fabricated and tested for on-line PD measurements of 23 kV electrical machines. A series of electrical tests and accelerated aging tests are performed on the ceramic coupler to evaluate the performance requirements, long-term reliability and thermal stability for in field application. The test results show that the newly developed ceramic coupler provides equal and improved performance at a lower cost compared to epoxy mica couplers, and estimated voltage life is anticipated to surpass 100 years.