• ETRI Journal
• /
• v.30 no.2
• /
• pp.238-248
• /
• 2008

At the extremes of the complexity-performance plane, there are two exemplary QoS management architectures: Integrated Services (IntServ) and Differentiated Services (DiffServ). IntServ performs ideally but is not scalable. DiffServ is simple enough to be adopted in today' core networks, but without any performance guarantee. Many compromise solutions have been proposed. These schemes, called quasi-stateful IntServ or stateful DiffServ, however, have not attracted much attention due to their inherently compromising natures. Two disruptive flow-based architectures have been recently introduced: the flow-aware network (FAN) and the flow-state-aware network (FSA). FAN's control is implicit without any signaling. FSA's control is even more sophisticated than that of IntServ. In this paper, we survey established QoS architectures, review disruptive architectures, discuss their rationales, and points out their disadvantages. A new QoS management architecture, flow-aggregate-based services (FAbS), is then proposed. The FAbS architecture has two novel building blocks: inter-domain flow aggregation and endpoint implicit admission control.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.5
• /
• pp.19-29
• /
• 2020

The paper examines the impact of information about cash flow from operating activities of firms listed on Vietnam's stock market to the decision making of individual investors. Data were collected from interviews with 160 individual investors about their investment decisions based on information on profit growth and cash flow growth from operating activities. T-test was conducted to research on Vietnam's stock market - a market considered as information that is not really public, transparent and ineffective. The research results show that: (1) investors do not care about cash flow from operating activities when making investment decisions if the company's profits grow positively, (2) information about cash flow from operating activities only affects the decisions of individual investors once profit growth is negative, and (3) conflicting information between profit growth and cash flow growth from business activities significantly affects the confidence and comfort of investors in Vietnam's stock market when they make investment decisions. Then, the study points out the mistake of investors when making investment decisions, and offers recommendations to investors when making investment decisions, not only concerned with profit growth, but also paying special attention to cash flow growth, especially cash flow from the company's business operations.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.36-39
• /
• 2006

To evaluate the effect of groundwater flow on the outlet temperature of a geothermal heat pump, 3 dimensional numerical simulations are performed considering both groundwater flow and pipe flow in the U-tube using TOUGHS, The present study involved the following 4 simulation cases (1) no groundwater flow, (2) slow groundwater flow (hydraulic conductivity: $1.0{\times}10^{-9}m/s)$, (3) fast groundwater flow (hydraulic conductivity, $1.0{\times}10^{-7}m/s$), and (4) groundwater flow varying with the depth (hydraulic conductivity: $1.0{\times}10^{-7}-1.0{\times}10^{-10}m/s$). The effect of groundwater flow on the outlet temperature is significant where hydraulic conductivity of aquifer is $1.0{\times}10^{-7}m/s$. Where hydraulic conductivity of aquifer is $1.0{\times}10^{-10}m/s$, however, that effect is negligible.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.1
• /
• pp.9-18
• /
• 2010

There are two kinds of models in two-phase pressured drop; homogeneous flow model and separated flow model. Many previous researchers have developed correlations for two-phase pressure drop in a microchannel. Most correlations were modified Lockhart and Martinelli's correlation, which was based on the separated flow model. In this study, experiments for adiabatic liquid water and nitrogen gas flow in rectangular microchannels were conducted to investigate two-phase pressure drop in the rectangular microchannels. Two-phase frictional pressure drop in the rectangular microchannels is highly related with flow regime. Homogeneous model with six two-phase viscosity models: $Owen^{(21)}$'s, $MacAdams^{(22)}$'s, Cicchitti et ${al.}^{(23)}$'s, Dukler et ${al.}^{(24)}$'s, Beattie and ${Whalley}^{(25)}$'s, Lin et ${al.}^{(26)}$'s models and six separated flow models: Lockhart and $Martinelli^{(27)}$'s, ${Chisholm}^{(31)}$'s, Zhang et ${al.,}^{(15)}$'s, Lee and ${Lee}^{(5)}$'s, Moriyama and ${Inue}^{(4)}$'s, Qu and $Mudawar^{(8)}$'s models were assessed with our experimental data. The best two-phase viscosity model is Beattie and Whalley's model. The best separated flow model is Qu and Mudawar's correlation. Flow regime dependency in both homogeneous and separated flow models was observed. Therefore, new flow pattern based correlations for both homogeneous and separated flow models were individually proposed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.12
• /
• pp.3287-3296
• /
• 1994

For the numerical computation of three-dimensional compressible flow field within a blade row in a centrifugal compressor, a quasi 3-dimensional solver which combines a reversible B-B flow and an irreversible H-S flow using finite element methods was developed. In a reversible B-B flow, the governing coordinates are modified in order to be applied to any type of turbomachinery, and two kinds of stream functions are introduced in order to make the Kutta condition exactly satisfied. In an irreversible H-S flow, the changes of entropy in the irreversible governing equations are determined not by empirical source but by the theoretical treatment of dissipation forces. The dissipation forces are obtained from the distribution of shear stresses in the flow passage which are given from the wall shear stresses using the exponential functions. A more accurate quasi-3-dimensional solver is established where the effect of body forces is involved in the non-axisymmetric H-S flow. Some numerical results obtained from authors' previous studies for axial flow machines assure that the present method is able to predict well as long as the flow is subsonic and not under strong viscous effect.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.187-192
• /
• 2003

The heat (mass) transfer characteristics in the tip-leakage flow region of a high-turning first-stage turbine rotor blade has been investigated by employing the naphthalene sublimation technique. The heat transfer data in the tip-leakage flow area for the tip clearance-to-span ratio, h/s, of 2.0% are compared with those in endwall three-dimensional flow region without tip clearance (h/s = 0.0 %). The result shows that the thermal load in the tip-leakage flow region for h/s = 2.0% is more severe than that in the endwall flow region for h/s = 0.0%. The thermal loads even at the leading and trailing edges for h/s = 2.0% are found larger than those for h/s = 0.0%. The tip-leakage flow results in heat transfer augmentations near the tip on both pressure and suction sides in comparison with the mid-span results.

• International Journal of Aeronautical and Space Sciences
• /
• v.1 no.1
• /
• pp.36-47
• /
• 2000

Three-dimensional compressible turbulent flow fields within the passage of a diffusing S-duct have been simulated by solving the Navier-Stokes equations with SIMPLE scheme. The average inlet Mach number is 0.6 and the Reynolds number based on the inlet diameter is $1.76{\times}10^6$ The extended $k-{\varepsilon}$ turbulence model is applied to modeling the Reynolds stresses. Computed results of the flow in a circular diffusing S-duct provide an understanding of the flow structure within a typical engine inlet system. These are compared with experimental wall static-pressure, total-pressure fields, and secondary velocity profiles. Additionally, boundary layer thickness, skin friction values, and streamlines in the symmetric plane are presented. The computed results depict the interaction between the low energy flow by the flow separation and the high energy flow by the reversed duct curvature. The computed results obtained using the extended $k-{\varepsilon}$ turbulence model.

• Korean Journal of Childcare and Education
• /
• v.18 no.6
• /
• pp.37-57
• /
• 2022

Objective: The purpose of this study was to investigate whether parent's play participation and children's friendly play initiative affect children's executive function through children's play flow. Methods: The survey was conducted on 376 children between the age of 3 and 5 their parents in Daegu city and Gyeonsang province. Data were collected through the questionnaires and analyzed using descriptive statistics, independent sample t-test, one-way ANOVA, Pearson correlation analysis, and path analysis with SPSS 25.0 and AMOS 23.0 programs. Results: The major results were as follows. First, There were significant differences in parent's play participation, children's friendly play initiative, children's play flow, and executive function according to the children's age and family income. Second, parent's play participation and children's friendly play initiative indirectly affected children's executive function through children's play flow. Conclusion/Implications: This study highlights how children's play affects executive function. Also, the findings of this study will contribute to designing various programs that can promote parent's play participation, children's friendly play initiative, and play flow, which affects the children's executive function.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.595-600
• /
• 2001

Thermal mass flow meter(TMF) and thermal mass flow controller(MFC) were used to measure and to control the mass flow rate of gases. TMF and MFC were designed for specified working pressure and gas. For the case of different working pressure and gases, the flow rate measurement accuracy decreased dramatically. In this study, a TMF and MFC was tested with three different gases and pressure range from 0.2 MPa up to 1.0 MPa. Effect of specific heat causes to increase flow measurement error as much as ratio of specific heat compared with reference gas. Changing of pressure causes to increase flow rate measurement error about -0.2% as the working pressure decreased 0.1 MPa. Response time of MFC was below 3.12 s for the case of increasing of flow rate. But the response time was increased up to 6.92 s for the case of decreasing of flow rate. When the solenoid valve was fully closed, a initial delay time of output of MFC was increased up to 1.36 s.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.685-688
• /
• 1998

Measurement of optical flow is a core problem of matching through the analysis of image sequences. In this paper, horn's and anandan's techniques are analyzed to derive a better technique for matching. Experimental results show that Horn's technique has low accuracy in measuring the velocity of optical flow while anandan's technique has poor performaance for diverging images. Based upon this observation, a new technique for the measurement of optical flow is proposed.