• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1675-1680
• /
• 2012

Three new cyanide-bridged $Cr^{III}Mn^{II}$ binuclear complexes, $[Mn(phen)_2Cl][Cr(bpmb)(CN)_2]{\cdot}H_2O$ ($\mathbf{1}$) (phen = 1,10-phenanthroline, $bpdmb^{2-}$ = 1,2-bis(pyridine-2-carboxamido)-4-methyl-benzenate), $[Mn(phen)_2Cl][Cr(bpmb)-(CN)_2]{\cdot}H_2O$ ($\mathbf{2}$) ($bpdmb^{2-}$ = 1,2-bis(pyridine-2-carboxamido)-4,5-dimethyl-benzenate), and $[Mn(phen)_2Cl]-[Cr(bpClb)(CN)_2]{\cdot}CH_3OH{\cdot}H_2O$ ($\mathbf{3}$) ($bpClb^{2-}$ = 1,2-bis(pyridine-2-carboxamido)-4-chloro-benzenate) were obtained based on $Mn(phen)_2Cl_2$ and a series of dicyanidechromate(III) building blocks. Single crystal X-ray diffraction analysis shows the structures of the three complexes are dimeric type with two different metal centers linked by a cyanide group from corresponding dicyanidechromate(III) building block. Magnetic investigations indicate the existence of relatively weak antiferromagnetic coupling between Cr(III) and Mn(II) ions with best-fit constants $J_{CrMn}=-2.78(5)cm^{-1}$ for $\mathbf{1}$, $J_{CrMn}=-3.02(2)cm^{-1}$ for $\mathbf{2}$ and $J_{CrMn}=-2.27(3)cm^{-1}$ for $\mathbf{3}$ based on the spin exchange Hamiltonian = $-2J_{CrMn}\hat{S}_{Cr}\hat{S}_{Mn}$. The magneto-structural correlation of cyanide-bridged $Cr^{III}Mn^{II}$ complexes has been discussed at last.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.1
• /
• pp.18-34
• /
• 2014

It is widely believed that cognitive radio (CR) networks have an opportunistic nature and therefore can only support best-effort traffics without quality-of-service (QoS) guarantees. In this paper, we propose a centralized CR network that adopts interference averaging techniques to support QoS guaranteed traffics under interference outage constraints. In such a CR network, a CR user adaptively adjusts its transmit power to compensate for the channel loss, thereby keeping the receive signal power at the CR base station (BS) at a constant level. The closed-form system capacity of such a CR network is analyzed and derived for a single cell with one CR BS and multiple CR users, taking into account various key factors such as interference outage constraints, channel fading, cell radius, and locations of primary users. The accuracy of the theoretical results is validated by Monte Carlo simulations. Numerical and simulation results show promising capacity potential for deploying QoS-guaranteed CR networks in frequency bands with fixed primary receivers. Our work can provide theoretical guidelines for the strategic planning of centralized CR networks.

• Corrosion Science and Technology
• /
• v.19 no.1
• /
• pp.43-50
• /
• 2020

In this study, the effects of KCl(s) and K₂SO₄(s) on the oxidation characteristics of 2.25Cr-1Mo steel were investigated for 500 h in 10O₂ + 10CO₂ (vol%) gas environmen at 650 ℃. Oxidation kinetics were characterized by weight gain, oxide layer thickness, and fitted models for the experiment data were proposed. The fitted models presented considerable agreement with the experimental data. The oxide layer was analyzed using the scanning electron microscope, optical microscope, and energy dispersive X-ray spectroscopy. The oxidation kinetics of 2.25Cr-1Mo steel with KCl and K₂SO₄ coatings showed significantly different oxidation kinetics. KCl accelerated the oxidation rate very much and had linear oxidation behavior. In contrast, K₂SO₄ had no significant effect, which had parabolic kinetics. The oxide layer was commonly composed of Fe₂O₃, Fe₃O₄, and FeCr₂O₄ spinel. KCl strongly accelerated the oxidation rates of 2.25Cr-1Mo steel in the high-temperature oxidation environment. Conversely, K₂SO₄ had little effect on the oxidation rates.

• Journal of the Korean institute of surface engineering
• /
• v.31 no.6
• /
• pp.334-344
• /
• 1998

Yew coating pmccss t.o form a surface layer ol CrN phasc on mild steel (A81 1020!, AlSI Hi3, 1Cr-0.5Mo steel (ASTM A213 and Nickrl-base superalloy (Inconel 718) was developed. Surlaces of various alloys t,n.ateii by chromizing for the formation ol Cr diffusion layer was subsequently trcaled by plasma nitriding in order t.o form the hard CrS coating layer on the surfaces. This duplex plasma surface tri-atments of chromizing and plasma nitriding have induced a lormation of a duplex-lrcated surfacr hyer of approximat~ls 70-80 $\mu\textrm{m}$thickncss with a iargcly improved microiiardnrss up to approxiniateW 1500Hv(50gf). The main cause for the lage improvment in the surface hardncss is altribilted to [.he fact that CrN and $Fe_xN$ phases are created successfully by ccliromizins and plasma nilriding treatment. High tenipera1,urc wear resislance of the duplex-treated mild steel and HI3 steels at $600^{\circ}C$ was examined. Comparing the duplex-treated specimens with the specimens treated only by chromizing, the rcsults shovmi that, thc wear volume of the duplex-treated mild skcl and 1113 stcel aSt.er a wear test, at $600^{\circ}C$ were reduced hy a Iactor of 8 and 3, respectively. Characteristics of the CrS phase by duplrx treatment were compared with $CrN_x$,/TEX> film by ion plating and the wear behaviors of CrN film lormed by two different nroccsses arc nea.riy identical.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.6
• /
• pp.669-673
• /
• 1993

The CO substitution reactions of the complex, $Cp(S-2,4-Me_2C_5H_5)CrCo$ with $PR_3(PR_3=PMePh_2,\;P(OCH_3)_3,\;PMe_2Ph)$ were investigated spectrophotometrically at various temperatures. From the reaction rates, it was suggested that the CO substitution reaction took place by first-order (dissociative) pathway. Activation parameters in decaline were ${\Delta}H^{\neq}\;=\;22.0\;kcal{\cdot}mol^{-1}$, ${\Delta}S^{\neq}=\;-3.8cal{\cdot}mol^{-1}{\cdot}K^{-1}$. Unusually low value of ${\Delta}S{\neq}$ suggests an ${\eta}^5-S{\to}{\eta}^5-U$ conversion of the pentadienyl ligand. This suggestion was confirmed by the Extended-Huckel molecular orbital (EHMO) calculations, which revealed that the total energy of $Cp(S-2,4-Me_2C_5H_5$)CrCO is about 0.42 kcal/mol more lower than that of $Cp(U-2,4-Me_2C_5H_5)CrCO$ and the energy of $[Cp(U-2,4-Me_2C_5H_5)Cr{\cdots}CO]^{\neq} $ transition state is about 2.43 kcal/mol lower than that of $[Cp(S-2,4-Me_2C_5H_5)Cr{\cdots}CO]^{\neq}$ transition state.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.2
• /
• pp.207-211
• /
• 1993

The CO substitution reactions in the complex, $Cp(S-C_5H_7)CrCO$ with $PR_3(PR_3=PMePh_2,\;P(OCH_3)_3,\;PMe_2Ph)$ were investigated spectrophotometrically at various temperatures. From the reaction rates, it was suggested that the CO substitution reaction takes place by first-order (dissociative) pathway. Activation parameters in decaline are ${\Delta}H^{\neq}\;=\;24.58\;kcal\;{\cdot}\;mol^{-1},\;{\Delta}S^{\neq}\;=\;3.05 cal\;{\cdot}\;mol^{-1}{\cdot}K^{-1}$. Unusually low value of ${\Delta}S^{\neq}$ suggests an ${\eta}^5-S\;{\to}\;{\eta}^5-U$ conversion of the pentadienyl ligand. This was confirmed by the extended-Huckel molecular orbital (EHMO) calculations, which revealed that the total energy Of $Cp(S-C_5H_7)CrCO$ is about 6.84 kcal/mol more stable than that of $Cp(U-C_5H_7)CrCO$ and the energy of $[Cp(U-C_5H_7)CrCO^{\neq}$ transition state is about 4.25 kcal/mol lower than that of $[Cp(S-C_5H_7)Cr]^{\neq}$ transition state.

• Journal of the Korean Magnetics Society
• /
• v.8 no.3
• /
• pp.111-117
• /
• 1998

Recent discovery of colossal magnetoresistance (CMR) phenomena in perovskite manganese oxides has evoked great interest for its physical peculiarity and the possible industrial application. Besides manganese oxides, CMR phenomena is also observed in $Tl_2Mn_2O_7$ with pyrochlore structure and in Cr-based chalcogenide with spinel structure. In this paper, we have studied electronic structures of Cr-based chalcogenide spindles $Fe_{1-x}Cu_xCr_2S_4$ at x=0.0, 0.5, 1.0 using the linearized muffin-tin orbital (LMTO) band method within the local density approximation (LDA). The characteristic resistivity for x=0.0, 0.5 could be explained qualitatively in terms of the half-metalic electronic structure and the Jahn-Teller effect. Especially, the half-metallic nature appearing in the metallic temperature regime is well descibed by the proposed conduction model for x=0.0, 0.5, 1.0. We have suggested, based on the conduction model, that the CMR phenomena observed in these compounds are closely correlated with the obtained half-metallic electronic structure.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2002.04a
• /
• pp.40.1-43
• /
• 2002

The purpose of this study was to evaluate a new sampling and analytical method for the determination of hexavalent chromium, Cr(VI) in mist from field plating operation. The Procedures of this new method (Shin & Paik's Method) are as the following: Airborne hexavalent chromium is collected on polyvinyl chloride (PVC) filter according to the National Institute for Occupational Safety and Health (NIOSH) Method 7600, and the filter sample is placed in a screw-capped vial and soaked with 2％ NaOH/3％ Na₂CO₃ solution immediately after sampling. The Cr(VI) sample is analyzed by ion chromatography/visible spectrophotometry (IC/VS) according to the U.S. Environmental Protection Agency (EPA) Method 218.6. The airborne Cr(VI) concentrations measured by this method were compared with those determined by three reference methods: One (NIOSH/EPA Method) consisted of sampling airborne Cr(VI) on PVC filters and storing the sample filters in screw-capped vials according to the NIOSH method, and analyzing Cr(VI) in samples using IC/VS according to the EPA method. The second method (Impinger Method/NaHCO₃) consisted of absorbing airborne Cr(VI) into 0.02 MN/sub a/Hco₃ solution in midget impinger, and analyzing the Cr(VI) in samples using IC/VS. The third method was the OSHA Method Id-215. Using these four different methods, four replicates of air samples were collected at an electroplating process and analyzed simultaneously. Two-way ANOVA and Paired t-test were used to test difference among values determined by the methods. There was no significant difference and a strong correlation (r/sup 2/=0.99) between Cr(VI) concentrations measured by the shin & Paik's Method and an impinger method (p＞0.05). However, Cr(VI) concentrations determined by Shin & Paik's Method were Significantly different form those by the NIOSH/EPA Method (p＜0.05) or the OSHA method (p＜0.05). The Cr(VI) concentrations of Shin & Paik's Method were Significantly higher than those of the NIOSH/EPA Method or the OSHA method. We concluded that the Shin & Paik's Method could prevent Cr(VI) losses caused by reduction and give more reliable results of airborne Cr(VI) concentrations in work environments.

• Journal of the Korean Magnetic Resonance Society
• /
• v.8 no.1
• /
• pp.28-36
• /
• 2004

Authors investigated whether there is a lateral effect of $^1$H MRS observable metabolite ratios between the symptomatic and the nonsymptomatic side in the early stage of Parkinson's disease with unilateral symptom. Localized in vivo $^1$H MR spectroscopy (MRS) was used to measure the metabolite levels in the symptomatic and the nonsymptomatic sides of the lentiform nucleus in Parkinson"s disease with unilateral symptom (N=25). The metabolite ratios of NAA/Cr and Cho/Cr in the symptomatic side were compared with those in the nonsymptomatic side. Significant metabolic lateral effect of NAA/(Cho+Cr) ratio was established between the symptomatic and the nonsymptomatic side of lentiform nucleus in Parkinson's disease with unilateral symptom (p<0.05). The ratio of NAA/(Cho+Cr) homolateral to the sympatomatic side of the patient is also lower than that of the control (P<0.05). On the basis of NAA/Cr ratios of lentiform nucleus between the symptomatic and the nonsymptomatic side, the present $^1$H MRS study shows a significant neuronal laterality in Parkinson's disease with unilateral symptom. In vivo $^1$H MRS may provide a diagnostic marker for neuronal dysfunction in Parkinson's disease with unilateral symptom.

• Bulletin of the Korean Mathematical Society
• /
• v.42 no.4
• /
• pp.777-787
• /
• 2005

In this paper we study (n + 1)-dimensional compact contact CR-submanifolds of (n - 1) contact CR-dimension immersed in an odd-dimensional unit sphere $S^{2m+1}$. Especially we provide necessary conditions in order for such a sub manifold to be the generalized Clifford surface $$S^{2n_1+1}(((2n_1+1)/(n+1))^{\frac{1}{2}})\;{\times}\;S^{2n_2+1}(((2n_2+1)/(n+1)^{\frac{1}{2}})$$ for some portion (n1, n2) of (n - 1)/2 in terms with sectional curvature.