• Journal of Korean Philosophical Society
• /
• v.123
• /
• pp.347-377
• /
• 2012

We have numerous terms representing mind. We can understand them largely as the relationship of 'Discernible Mind' and 'Indiscernible Mind.' Because, our understanding mind is formed by linguistic discernment. When any discernment arise from our mind, we recognize the mind shown by discernment[Discernible Mind]. At the same time, we can think orignal mind[Indiscernible Mind] outside that discernment. Buddhism, generally, has understood mind in the relation with everything. That is to say, they have understood it from the perspective of dependent co-arising. In the early Buddhism and the abhidharma Buddhism, approaches to mind were mainly made by the discerning method. They explained arising and vanishing of 'Discernible Mind' by the law of dependent arising. Co-arisen 'Discernible Mind' is impermanent and temporary. But they never be denied on 'Discernible Mind' as an vainness. In $Mah{\bar{a}}y{\bar{a}}na$ Buddhism, $N{\bar{a}}garjuna$ understood the essence of dependent arising as the ${\acute{s}}{\bar{u}}nyata$ (emptiness) and the law of dependent arising as simultaneous dependence, not gradual dependences. $N{\bar{a}}garjuna$ criticized on vainness of Discernible Mind through ${\acute{s}}{\bar{u}}nyata$, and made possible to directly perceive Indiscernible Mind, before Discernment. Undiscriminating Mind can not be explained for being stayed beyond the state linguistic discernment(false discrimination), however, had been approached from various other names to potential consciousness or original nature. While ${\acute{s}}{\bar{u}}nata$ thought focused on criticizing vainness of discernment, Hwaeum thought suggested aspect of Indiscernible mind from the aspect of $ekay{\bar{a}}na$ dependant co-arising that everything has been co-arisen, the truth of discrimination. Furthermore, it opened the path to affirm the both indiscernible mind and discernible mind by illuminating that everything is manifestation of original nature itself, i.e. nature-arising. Hwaeum thought focused on perfect understanding by explicating the relation both indiscernible mind and discernible mind from the view point of non-abiding, rather than clarifying 'Discernible Mind' and 'Indiscernible Mind', itself. That is to say, from the aspect of dependant co-arising, Hwaeum thought plays a role that enters the indiscernible world from discernible world, and also, another role, from the aspect of nature-arising that is manifesting discernible world from indiscernible world. These aspects are important for righteous understanding on mind, and also simultaneously, very effective for healing disease of obsession, a kind of metal disease.

• Acta Via Serica
• /
• v.2 no.2
• /
• pp.7-27
• /
• 2017

The present study aims to do a documental study of the Mongol invasion and the fall of Baghdad (the capital of the Abbasid Caliphate) in 1258 CE. It is a case study on a document and two comments on it, which were originally recovered from the burial shroud of a person killed during $H{\ddot{u}}leg{\ddot{u}}^{\prime}s$ conquest of Baghdad. This document was later inserted by someone (possibly by one of its two commentators) in a section of a primary manuscript of Kitab al-Wara'a (written in 1147 CE). Then Osman ibn ${\dot{G}}{\bar{a}}nim$ al-Hiti and Ṭahir ibn '$Abd-All{\bar{a}}h$ ibn Ibrahim ibn Aḥmad, as commentators, wrote their comments about the document. Although these documents are in the form of fragmentary notes, they are rare primary sources that depict the events and the conditions of the siege, the conquest of Baghdad and the collapse of Abbasid Caliphate. This article, while providing images, revised texts, and translations of the documents, aims to introduce them and to explore the civil factors contributing to the fall of Baghdad.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.64-72
• /
• 1976

This experimental work was carried out to investigate the fatigue bending strength on various shapes and sizes of notches of the domestically manufactured steel plate. The notch types tested were a circular hole, U-and V-notches. The S-N diagram for different notch shapes were discussed in relation to plan bending strength and stress concentration factor of notches .The results of the experiments are summarized as follows : (1) The difference between stress concentration factor and notch factor was greater as the radium of notch root became smaller, and these values approached to an identical value as the radium of notch root increased. (2) It was shown that the plane bending fatigue limit of bar without notch for the hotrolled steel having the tensile strength of 33.1kg/$mm^2$was 17.0kg/$mm^2$. (3) U-and V-notch had a greater effect of stress concentration factor on the endurance limit, but O-hole showed the same effect only for $\o\pm2mm$. (4) For the same radius of notch root, U-notch showed a lower value of fatigue limit compared to V-notch and O-hole.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.41-43
• /
• 1997

This paper represents the comparison of harmonic loss characteristics of the inverter-driven 3-phase squirrel cage induction motor with slit and U-iron bridge slots of rotor. Two-dimensional time-stepped finite element method is used for electromagenetic field analysis. And spectrums of bar current, phase current, and torque are compared in each case.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.2
• /
• pp.112-121
• /
• 1988

A study on friction welding of carbon steel bar (SM45C) to chrome molybedenum steel bar(SCM4) is examined experimentally through tensile test, hardness test, microstructure test and fatigue test. so, this paper deals with optimizing the welding concitions and analyzing various mechanical properties about friction welds of SM45C to SCM4 steel bars. The results obtained are summarized as follows; 1) For friction welded joints of SM45C to SCM4 steel bars, the total upset(U)increases linearly with an increase of heating time ($t_{1}$) till 6s. 2) The determined optimum welding conditions are heating time ($t_{1}$)2s, upsetting time($t_{2}$), 3s, heating pressure($p_{1}$), 4kgf/$mm^{2}$(39.2MPa), upsetting pressure($p_{2}$, 8kgf/mm$^{2}$(78.4MPa) and rotating speed(N), 2, 000rpm when the total upset(U) is 3.4mm, resulting in a computed relationship between the joint tensile strength .sigma.$_{t}$ (kgf/mm$^{2}$and the total upset U(mm); .sigma.$_{t}$ =$0.21U^{3}$ - $3.38U^{2}$ +17.03U + 66.00 3) As the elongation is increased more and more, the fracture position becomes away from weld interface and the fractures are similar to those of SM45C. Fracture is taken place on SM45C side. 4) The weld interface of two dissimilar materials is mixed strongly, and the heat affected zone is about 2.0mm at SM45C while about 2.7 mm at SCM4 side. Therefore, the welded zone and heat affected zone are very narrow, comparing with those of the joints welded by the other welding methods. 5) The fatigue strengths at N=10$^{6}$ cycles of SM45C, SCM4 and friction welded joints are 23kgf/$mm^{2}$, 33kgf/$mm^{2}$(220.5 MPa), and 22.5kgf/$mm^{2}$(220.5MPa) respectively, and fracture at friction welded joint takes place at the side of SM45C. 6) The hardness of the friction weld interface is 3 times higher than that of base metal. 7) Fatigue strength of friction welded joint is higher than that of base metal. 8) Notch sensitivity factor of friction welded joint is lower than that of base metal.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.4
• /
• pp.283-289
• /
• 2021

Objective: The aim of this study was to analyze the pattern of Kolman technique by five Korean top gymnasts including the three national athletes on horizontal bar. Method: Two digital high-speed camcorders were used with 90 frames/sec and their Kolman motions were filmed in sports science secondary school gymnasium at U city. After the kinematic and kinetic variables were carried out by Kwon3D 3.1 motion package during the whole phase, the optimized release motion was investigated by simulating the body COG path during the aerial phase. Results: Firstly, it was revealed that the average changes of hip, shoulder joint angle were 84 deg, 53 deg respectively during the functional sub-phase and the average swing phaseal time was 1.21 s. Secondly, it was revealed that the average body COG positions and velocities (Y, Z) at release were -0.65 m, 0.48 m, 1.65 m/s, 3.97 m/s respectively and the average release angle, peak height and flight time were 67 deg, 1.29 m, 0.79 s respectively. Thirdly, it was revealed that the directions of somersault of whole and lower body, tilt of lower body were counterclockwise, whereas the directions of tilt of whole body, twist of whole and lower body were clockwise at the ready for re-grasp. Lastly, it was revealed that the body COG paths were different from each other during the aerial phase followed by the different body COG velocities. Conclusion: Korean gymnasts of this study controlled their motions well in terms of the timing of hip·shoulder joint, body position, body angular momentum especially during the functional sub-phase, but their motions were different during the aerial phase. Nonetheless most of them made the adequate body position at the instant of re-grasp. It would be suggested that Korean gymnasts except S3 should increase the vertical velocity.

• Kyungpook Mathematical Journal
• /
• v.62 no.1
• /
• pp.133-166
• /
• 2022

Let M be a semi-invariant submanifold with almost contact metric structure (𝜙, 𝜉, 𝜂, g) of codimension 3 in a complex space form M_n+1(c) for c ≠ 0. We denote by S and R_𝜉 be the Ricci tensor of M and the structure Jacobi operator in the direction of the structure vector 𝜉, respectively. Suppose that the third fundamental form t satisfies dt(X, Y) = 2𝜃g(𝜙X, Y) for a certain scalar 𝜃 ≠ 2c and any vector fields X and Y on M. In this paper, we prove that if it satisfies R_𝜉𝜙 = 𝜙R_𝜉 and at the same time S𝜉 = g(S𝜉, 𝜉)𝜉, then M is a real hypersurface in M_n(c) (⊂ M_n+1(c)) provided that $\bar{r}-2(n-1)c{\leq}0$, where $\bar{r}$ denotes the scalar curvature of M.

• The Journal of Korean Academy of Prosthodontics
• /
• v.14 no.1
• /
• pp.66-71
• /
• 1976

The purpose of this investigation was to evaluate the mouth preparation and design of removable partial dentures. A total of 187cases for the prefabricated partial denture frameworks in both maxillary and mandibular semi-dentulous situations (66 cases and 203 cases) was selected from this study. The evaluations of mouth preparation and design observed here involved the classification of edentulous spaces, status of abutment splinting with location, design of direct retainer and structure of maxillary major connector according to the incidence of both dental arches, ages, sexes and segment of semidentulousness. The analyzed results were as follows: 1) The order of frequency rate in removable partial denture construction was Class II (50.27%), Class I (36. 90%), Class III (10.69%), and Class IV (2.14 %). 2) The distribution on design of maxillary removable partial denture prosthesis was 33.22% and 64.11% in mandibular removable partial denture prosthesis. 3) The age distribution of removable partial denture prosthesis was prominent after40 years (41.71%). 4) The design pattern of maxillary major connectors was in order of anteroposterior bar, single palatal bar, palatal strap, U-shape connector. 5) The design pattern of direct retainer was in order of Aker's clasp, I-bar clasp, backaction clasp, cuspid universal clasp. 6) The abutment for partial denture clasp splinted between premolar and premolar and its frequency rate revealed 53.44%. 7) It seemed that the location and design of the indirect retainer showed accepatble limit.

• Journal for History of Mathematics
• /
• v.30 no.4
• /
• pp.233-246
• /
• 2017

$Ces{\grave{a}}ro$ summability is a generalized convergence criterion for infinite series. We have investigated the classical results of summability for Fourier series from 1897 to 1957. In this paper, we are concerned with the summability and summation methods for Fourier Series from 1960 to 2010. Many authors have studied the subject during this period. Especially, G.M. Petersen,$K{\hat{o}}si$ Kanno, S.R. Sinha, Fu Cheng Hsiang, Prem Chandra, G. D. Dikshit, B. E. Rhoades and others had studied neoclassical results on the summability of Fourier series from 1960 to 1989. We investigate the results on the summability for Fourier series from 1990 to 2010 in section 3. In conclusion, we present the research minor lineage on summability for Fourier series from 1960 to 2010. $H{\ddot{u}}seyin$ Bor is the earliest researcher on ${\mid}{\bar{N}},p_n{\mid}_k$-summability. Thus we consider his research results and achievements on ${\mid}{\bar{N}},p_n{\mid}_k$-summability and ${\mid}{\bar{N}},p_n,{\gamma}{\mid}_k$-summability.

• Ocean Systems Engineering
• /
• v.3 no.2
• /
• pp.123-136
• /
• 2013

This study is devoted to the optimal design of compressed bars under axial compressive forces and exposed to a corrosive environment. The initial volume of the structure is taken as an optimality parameter. Gutman - Zainullin's exponential stress corrosion model is adopted for analysis. Analytical and numerical results are derived for optimal variation of the cross-sectional area of the bar along its axis.