• Corrosion Science and Technology
• /
• 제4권4호
• /
• pp.121-129
• /
• 2005

Basic design concept of the future steel structure requires environmental compatibility and maintenance free capability to minimize economic burdens. Recent trends in alloy design for advanced weathering steel include addition of various alloying elements which can enhance formation of stable and protective rust layer even in polluted urban and/or high $Cl^{-}$ environment. The effects of Ca, Ni, W, and Mo addition on the corrosion property of Ca-modified weathering steel were evaluated through a series of electrochemical tests (pH measurement and electrochemical impedance spectroscopy: EIS) and structural analysis on rust layer formed on the steel surface. Ca-containing inclusions of Ca-Al-Mn-O-S compound are formed if the amount of Ca addition is over 25 ppm. Steels with higher Ca content results in higher pH value for condensed water film formed on the steel surface, however, addition of Ni, W, and Mo does not affect pH value of the thin water film. The steels containing a high amount of Ca, Ni, W and Mo showed a dense and compact rust layer with enhanced amount of ${\alpha}-FeOOH$. Addition of Ni, W and Mo in Ca-modified weathering steel shows anion-selectivity and contributes to lower the permeability of $Cl^{-}$ ions. Effect of each alloying element on the formation of protective rust layer will be discussed in detail with respect to corrosion resistance.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.478-481
• /
• 2004

An experimental investigation on the relationship between corrosion of reinforcement and bond strength in pull-out test specimen has been conducted to establish the allowable limit of rust of reinforcement in the construction field. The reinforcing bars used in this study were rusted before embedded in pull-out test specimen. The first component of this experiment is to make reinforcing bar rust electrically based on Faraday's theory to be 2, 4, 6, 8 and $10\%$ of reinforcing bar weight. For estimation of the amount of rust by weight, Clarke's solution and shot blasting were adopted and compared. Parameters also include 24 and 45MPa of concrete compressive strengths and diameter of reinforcing bar (16, 19 and 25mm). Pull-out tests were carried out according to KS F 2441 and ASTM C 234. Results show that up to $2\%$ of rust increases the bond strength regardless of concrete strength and diameter of reinforcing bar. As expected, the bond strength increases as compressive strength of concrete increases and the diameter of bar decreases.

• 한국해양공학회지
• /
• 제19권6호통권67호
• /
• pp.72-77
• /
• 2005

The materials used in a ship screw propeller are commonly made with brass. The seawater corrosion and seawater cavitation of the screw propeller reduces the propulsive performance of the ship. In screw manufacturing, the corrosion rust of the screw propeller is removed through a hand grinding method. The grinding process produces dust of the heavy metals from the brass. The dust creates a poor working environment that is harmful to the health of the workers. An automatic corrosionrust removing apparatus, using a blasting method, was developed for the improvement of screw polishing conditions and its working environment. The performance of this apparatus was investigated by surface roughness, weight loss rate, hardness, electrochemical corrosion resistance, and cavitation erosion, after removing of the corrosion rust under various blasting conditions. Two medias of alumina and emery were used in this experiment. The surface roughness and hardness of the screw were improved by this apparatus. The electrochemical corrosion potential (Ecorr) and current density (Icorr) were measured by the dynamic polarization method, using a potentiostat,under the conditions of surface polishing with grinding, blasting, wire brushing, and fine sand papering. The test results prove that the new corrosion rust-removing apparatus improves the surface performance of a screw propeller.

• The Plant Pathology Journal
• /
• 제18권5호
• /
• pp.271-278
• /
• 2002

The effect of five plant population densities [5 (D$_1$), 10 (D$_2$), 20 (D$_3$), 30 (D$_4$), and 40 (D$_{5}$) plants/m$^2$] of four groundnut cultivars [ICGV 86699, ICG (FDRS) 10, ICGS 11 and TMV 2] and fungicide application (Kavach, chlorothalonil) to manage late leaf spot (LLS) and rust were studied in a field experiment during the 1995 and 1996 rainy seasons. LLS and rust severities were low in fungicide sprayed plots in all the cultivars irrespective of plant densities. Severities of LLS and rust, and percentage defoliation caused by LLS were significantly more in higher plant densities (D$_4$, D$_{5}$) than in lower plant densities (D$_1$, D$_2$, D$_3$) in fungicide sprayed and unsprayed plots in all the cultivars. All the cultivars gave significantly higher haulm and pod yields in fungicide sprayed plots than in unsprayed plots. Haulm and pod yields were significantly higher in higher plant densities than in lower plant densities. A combination of higher plant densities (D$_4$, D$_{5}$) and fungicide protection against LLS and rust gave maximum yield.yield.

• Corrosion Science and Technology
• /
• 제5권1호
• /
• pp.27-32
• /
• 2006

One of the critical issues in the coating specification is the allowable limit of surface contaminant(s) - such as soluble salt(s), grit dust, and rust - after grit blasting. Yet, there is no universally accepted data supporting the relationship between the long-term coating performance and the amount of various surface contaminants allowed after grit blasting. In this study, it was attempted to prepare epoxy coatings applied on grit-blasted steel substrate dosed with controlled amount of surface contaminants - such as soluble salt(s), grit dust, and rust. Then, coating samples were subjected to 4,200 hours of cyclic test(NORSOK M-501), which were then evaluated in terms of resistance to rust creepage, blistering, chalking, rusting, cracking and adhesion strength. Additional investigations on the possible damage at the paint/steel interface were carried out using an Electrochemical Impedance Spectroscopy(EIS) and observations of under-film-corrosion. Test results suggested that the current industrial specifications were well matched with the allowable degree of rust, whereas the allowable amount of soluble salt and grit dust after grit blasting showed a certain deviation from the specifications currently employed for fabrication of marine vessels and offshore facilities.

• 한국균학회지
• /
• 제51권1호
• /
• pp.1-6
• /
• 2023

Tilia mandshurica trees with rust symptoms have consistently been noticed during disease surveys in Korea since 2006. Based on the morphological examination and molecular sequence analysis of the internal transcribed spacer and large subunit of ribosomal DNA, Pucciniastrum tiliae was identified as the causal fungus of rust disease. This is the first report of P. tiliae infection on T. mandshurica in Korea.

• 한국응용과학기술학회지
• /
• 제23권3호
• /
• pp.192-198
• /
• 2006

To provide an aqueous rust inhibitor for metalworking lubricant having low toxicity and excellent rust resistance, we synthesized diester of malonic acid by three consecutive esterifications with over 98% of conversion. This substituted malonic diester could be used as an additive to mineral oil based metalworking lubricant. These metalworking lubricant compositions were showed excellent rust resistance and suitable for various metals and different metalworking processes including hot rolling and cold rolling of aluminum and aluminum alloys.

• 한국식물병리학회지
• /
• 제10권3호
• /
• pp.181-191
• /
• 1994

Occurrence of diseases in economic resource plants in Korea is poorly known. This paper reports short descriptions on symptom, occurrence condition, pathogen, and some phytopathological notes for each 10 fungal plant diseases new to Korea; leaf spot of Rosa multiflora with Seimatosporium discosioides causing leaf spot and defoliation, leaf blight of Equisetum arvense with Titaeospora equiseti causing leaf spot to leaf blight, leaf blight of Setaria viridis with Phyrenochaeta setariae causing leaf spot of Aster tataricus with Septoria astericola causing leaf spot and black spot, powdery mildew of Clematis fusca var. coreana with Erysiphe ranunculi causing powdery mildew and dwarfing, powder mildew of Ligularia stenocephala with Erysiphe galeopsidis causing powdery mildew and dwarfing, powdery mildew of Phlox subulata with Erysiphe cichoracearum causing powdery mildew and defoliation tar spot of Lonicera japonica with Rhytisma lonicericola causing tar spot and dwarfing, white rust of Pharbitis nil with Albugo ipomoeae-pandulatae causing white rust and deformation, and white rust of Achyranthes japonica with Albugo achyranthis causing white rust and defoliation.

• The Plant Pathology Journal
• /
• 제24권1호
• /
• pp.84-86
• /
• 2008

Field surveys and specimen collections of the rust fungal pathogen Gymnosporangium were carried out for 15 years from 1985 through 1999 in various locations of Korea. Macroscopic and microscopic examinations of morphological characteristics of aecia from the collected specimens revealed that Gymnosporangium globosum is the causal agent of American hawthorn rust disease on Crataegus pinnatifida and C. pinnatifida varmajor. The host plants are new for this rust fungus. G. globosum was found only in Gyeonggi and Chungbuk provinces, indicating that its distribution in Korea is limited. This is a first full description on morphological characters of aecia of G. globosum in Korea.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1800-1803
• /
• 2002

The pulsed power system was widely making use good of many industrial and environments. The pulse generator generally required for short pulse duration and high peak value was forced to consider its volume and economy. In this paper, this system is designed and fabricated which has a compact size of pulse generator with switched MOSFET. We have studied the removal of rust material using Arc discharging in pulsed power system. It have tested their characteristics by adjusting variable voltage charging and pulse repetition rate. As a result, We can eliminate rust materials with this device.