• 응용통계연구
• /
• 제28권5호
• /
• pp.1003-1011
• /
• 2015

한국 프로야구에서 팀들의 실점을 설명하기 위한 지표를 연구하였다. Kim과 Kim (2014)이 팀들의 득점력을 설명하기 위한 공격지표를 연구한 것과 유사하게 본 논문에서는 팀들의 실점을 설명하기 위한 수비지표를 연구하였다. 여러 가지의 수비지표 중 팀의 실점과 관련이 큰 것들을 결합하여 만든 몇 가지의 결합지표들을 고려하였다. 프로야구 원년인 1982년부터 2014년까지의 정규리그 전 경기 자료를 분석한 결과 WHIP와 경기당피홈런의 가중평균으로 정의되는 가중WPH가 실점을 가장 잘 설명해줬다. 구체적으로 WHIP에 81%, 경기당피홈런에 19%의 가중값을 주는 가중WPH가 팀의 평균실점과 0.95033의 상관계수를 갖는 최적의 가중WPH인 것으로 나타났다. 시대별 분석에서도 크게 다르지 않은 결과를 얻었다.

• 응용통계연구
• /
• 제29권7호
• /
• pp.1283-1294
• /
• 2016

한국 프로야구팀들의 실점을 설명하기 위한 수비지표를 연구하였다. 출루율과 장타율을 결합한 OPS가 팀들의 득점력을 매우 잘 설명한다는 사실을 동기로 하여 본 논문에서는 팀들의 실점을 설명하기 위한 수비지표를 연구하였다. 여러 가지의 수비지표 중 팀의 실점과 상관관계가 높은 것들을 결합하여 만든 몇 가지의 결합 지표들을 고려하였다. 프로야구 원년인 1982년부터 2015년까지의 정규리그 전 경기 자료를 분석한 결과 수정WHIP와 이닝당피홈런의 가중평균으로 정의되는 가중수정WPH2가 실점을 가장 잘 설명해줬다. 구체적으로 수정WHIP에 34%, 이닝당피홈런에 66%의 가중값을 두는 가중수정WPH2가 팀의 경기당 평균실점과 0.95362의 상관계수를 갖는 최적의 지표인 것으로 나타났다. 이 결과는 Kim과 Kim (2015a)에서 얻어진 지표에 의한 결과보다 좀 더 향상된 결과이다. 시대별 분석에서도 크게 다르지 않은 결과를 얻었다. 또한 얻어진 지표의 값이 좋은 투수 10명씩의 명단을 최근 3년간에 대해 연도별로 작성해보았다.

• 품질경영학회지
• /
• 제30권3호
• /
• pp.53-65
• /
• 2002

This paper studies an economic manufacturing quantity (EMQ) model with two types of failures and planned preventive maintenance of the production facility. One is a type I (major) failure which should be corrected by a failure maintenance and the other is a type H (minor) failure which can be minimally repaired without interrupting the production run. The objective is to determine the lot size and preventive replacement policy minimizing the long-run expected cost per unit time. We consider a control policy with a constant production lot size and preventive maintenance after completing n production runs. It is assumed that both preventive and failure maintenance times are random and the demand arriving during a stock-out period is lost. An expression for the expected cost per unit time is obtained in the general case. A special case is discussed and numerical results are provided.

• 한국해양학회지
• /
• 제8권1호
• /
• pp.9-21
• /
• 1973

1. 플루오르를 함유하는 배수가 바다에 유입되었을 때 플루오르화물이온을 그 추적자로 이용할 수 있다. 2. "Dotite"시약 "알풋손"에 의한 해수중의 플루오르 정량법을 검토하였다. 3. 진해만의 플루오르화물이온 농도분포를 조사하여 진해만에 플루오르를 함유하는 배수가 평균 최소한 0.13% 혼입되어 있으며 그것은 진해 모화학공장의 폐수에 기인한다. 그리고 그것이 혼입되어가는 경로를 밝혔다. 그것이 혼입되어가는 경로를 밝혔다.

• 한국조경학회지
• /
• 제28권1호
• /
• pp.136-146
• /
• 2000

Although the urban elevated road is welcomed in modern society to deal with urban traffic problems, its negative influence on both the pedestrian environment and urban landscape has been frequently observed. Furthermore, the space under elevated structures has been ignored, being the lost space. Recently, several efforts have been devoted into bringing back the lostspace. However, any specific design guidelines shown in the street design of Japan and Singapore have not been suggested in Korea, yet. This study proposes a case of the Nengdong-Ro street design where the two-story urban elevated road is being constructed and negative effects of the elevated road are largely expected. One of the purposes of Nengdong-Ro street design proposed in this study is to relieve the negative effect os the two-story elevated road, and to provide a better pedestrian environment in Nengdong-Ro. The other purpose is to suggest general guidelines that can be applied to the similar context as Nengdong-Ro. It is considered that the space under the elevated road generally consist of three sections: 1) main section where the elevated road runs parallel with the ground, 2) landing section where elevated road goes down to the ground, and 3) facility section where facilities such as the platform and the ticketing booth are located. The design guidelines are suggested for each section, because each section has a different situation. Plans, section and elevations and the details of the street furniture are also incorporated to support the design guidelines.

• 천문학회보
• /
• 제42권1호
• /
• pp.38.1-38.1
• /
• 2017

We report the results of three-dimensional radiation hydrodynamic simulations of star cluster formation in turbulent molecular clouds, with primary attention to how stellar radiation feedback controls the lifetime and net star formation efficiency (SFE) of their natal clouds. We examine the combined effects of photoionization and radiation pressure for a wide range of cloud masses (10^4 - 10^6 Msun) and radii (2 - 80 pc). In all simulations, stars form in densest regions of filaments until feedback becomes strong enough to clear the remaining gas out of the system. We find that the SFE is primarily a function of the initial cloud surface density, Sigma, (SFE increasing from ~7% to ~50% as Sigma increases from ~30 Msun/pc^2 to ~10^3 Msun/pc^2), with weak dependence on the initial cloud mass. Control runs with the same initial conditions but without either radiation pressure or photoionization show that photoionization is the dominant feedback mechanism for clouds typical in normal disk galaxies, while they are equally important for more dense, compact clouds. For low-Sigma clouds, more than 80% of the initial cloud mass is lost by photoevaporation flows off the surface of dense clumps. The cloud becomes unbound within ~0.5-2.5 initial free-fall times after the first star-formation event, implying that cloud dispersal is rapid once massive star formation takes place. We briefly discuss implications and limitations of our work in relation to observations.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제8권2호
• /
• pp.195-200
• /
• 2004

Trypsin can be immobilized on silk fibroin fiber (SFF) by introducing several spacer arms, such as ethylene diamine (ED), bovine serum albumin (BSA) and silk sericin (SS). Direct immobilization on silk fiber (SFFGA) has low activity because of the steric hindrance between the trypsin and substrate. The introduction of spacer arms onto SFF-GA can enhance the activity of trypsin by reducing the steric hindrance. When ED is used as a spacer arm, the activity of trypsin has increased but its stability decreased due to the increased hydrophobicity of SFF. BSA and SS, as a spacer arm, have better results in both activity and stability. SFF-BSA shows some decrease in the specific activity due to improper immobilizatin. SFF-SS maintained 90% of its initial activity even after 12 hrs incubation at $50^{\circ}C$. In the case of repeated hydrolysis of silk sericin with immobilized trypsin, SFF-GA and SFF-ED lost 50% of their initial activity right after first run, whereas SFF-BSA and SFF-SS maintained 80% of their initial activities even after 5 runs. Higher operational stability is due to increased hydrophilicity of SFF by introducing hydrophilic spacer arms such as BSA and SS. The high content of serine in SS increases the hydrophilicity of SFF resulting the best results among other spacer arms.

• 한국멀티미디어학회논문지
• /
• 제9권7호
• /
• pp.904-913
• /
• 2006

VoD(Video on Demand) 시스템의 QoS(Quali쇼 of Service)는 클라이언트들의 스트림 서비스 요청이 시스템으로부터 거부되거나 서비스 도중에 손실되는 장애현상의 발생을 줄임으로써 향상시킬 수 있다. 본 연구에서는 VoD 시스템의 작업과정을 주기적으로 모니터링하며, 동적으로 작업부하(workload)를 조정하여 장애현상의 발생을 줄임으로써 성공적인 스트림 서비스 처리량(throughput)을 증가시킬 수 있는 동적 작업부하조정기 (Dynamic Workload Balancer) 모델을 제안하였다. 제안된 모델은 에이전트개념을 사용하여 VoD 시스템과는 서로 독립적으로 작동할 수 있게 하였으며, VoD 시스템과 인터페이스를 하는 에이전시(Agency) 부분과 작업부하 조정에 필요한 조치를 추론하거나 학습하는 인텔리전스(Intelligence) 부분으로 구성된다. 그리고 제안된 모델을 VoD 시스템에 적용하는 경우에 실효성이 있는지를 시뮬레이터를 구현하여 실험하였다. 실험의 결과, 제안된 모델을 적용하면 기존의 방법을 적용한 경우보다 상대적으로 QoS가 향상된다는 것을 알 수 있었다.

• Journal of Information Processing Systems
• /
• 제7권2호
• /
• pp.241-260
• /
• 2011

In earlier days, most of the data carried on communication networks was textual data requiring limited bandwidth. With the rise of multimedia and network technologies, the bandwidth requirements of data have increased considerably. If a network link at any time is not able to meet the minimum bandwidth requirement of data, data transmission at that path becomes difficult, which leads to network congestion. This causes delay in data transmission and might also lead to packet drops in the network. The retransmission of these lost packets would aggravate the situation and jam the network. In this paper, we aim at providing a solution to the problem of network congestion in mobile ad hoc networks [1, 2] by designing a protocol that performs routing intelligently and minimizes the delay in data transmission. Our Objective is to move the traffic away from the shortest path obtained by a suitable shortest path calculation algorithm to a less congested path so as to minimize the number of packet drops during data transmission and to avoid unnecessary delay. For this we have proposed a protocol named as Congestion Aware Selection Of Path With Efficient Routing (CASPER). Here, a router runs the shortest path algorithm after pruning those links that violate a given set of constraints. The proposed protocol has been compared with two link state protocols namely, OSPF [3, 4] and OLSR [5, 6, 7, 8].The results achieved show that our protocol performs better in terms of network throughput and transmission delay in case of bulky data transmission.

• 한국물환경학회지
• /
• 제25권3호
• /
• pp.351-362
• /
• 2009

The Soil and Water Assessment Tool (SWAT) model, semi-distributed model, first divides the watershed into multiple subwatersheds, and then extracts the basic computation element, called the Hydrologic Response Unit (HRU). In the process of HRU generation, the spatial information of land use and soil maps within each subwatershed is lost. The SWAT model estimates the HRU topographic data based on the average slope of each subwatershed, and then use this topographic datum for all HRUs within the subwatershed. To improve the SWAT capabilities for various watershed scenarios, the Spatially Distributed-HRU (SD-HRU) pre-processor module was developed in this study to simulate site-specific topographic data. The SD-HRU was applied to the Hae-an watershed, where field slope lengths and slopes are measured for all agricultural fields. The analysis revealed that the SD-HRU pre-processor module needs to be applied in SWAT sediment simulation for accurate analysis of soil erosion and sediment behaviors. If the SD-HRU pre-processor module is not applied in SWAT runs, the other SWAT factors may be over or under estimated, resulting in errors in physical and empirical computation modules although the SWAT estimated flow and sediment values match the measured data reasonably well.