• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.51-59
• /
• 2007

These studies show that I applied to functional insole (a specific A company) for minimizing shocks and sprain people's ankle arising from running. How to an effect on human body which studied a kinematics and kinetics from 10 college students during experiments. This study imposes several conditions by barefoot, normal running shoes and put functional insole shoes ran under average $2.0{\pm}0.24\;m$/sec by motion analysis and ground reaction force that used to specific A company. First of all, motion analysis was caused by achilles tendon angle, angle of the lower leg, angle of the knee, initial sole angle and barefoot angle. The result of comparative analysis can be summarized as below. Motion analysis showed that statically approximates other results from achilles tendon angle (p<.01), initial ankle angle(p<.05), initial sole angle(p<.001) and barefoot angle(p<.001). Ground reaction force also showed that statically approximates other results from impact peak timing (p<.001), Maximum loading rate(p<.001), Maximum loading rate timing (p<.001) and impulse of first 20 percent (p<.001). Above experiment values known that there was statically difference between Motion analysis and Ground reaction force under absorbing of the functional insole shoes which was not have an effect on our body for kinetics and kinematics.

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.415-416
• /
• 2011

This paper describes about a technique of generating music from the natural motion of fish which are detected via the running averaging background subtraction method. The motion of the fish will create musical notes on a background frame which will be analyzed and played by a music playing module that is proposed in this paper called "PhysicX". This module is also capable of interacting with the fishes. in the tank.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.1
• /
• pp.16-23
• /
• 2021

Objective: The purpose of the study was to compare the acceleration and shock attenuation (SA) of the runners with/without low back pain (LBG vs. NLBG) while running at 2.5 m/s, 3.0 m/s, 3.5 m/s and 4.0 m/s. Method: 15 adults without low back pain (age: 23.13±3.46 years, body weight: 70.13±8.94 kg, height: 176.79±3.68 cm, NLBG) and 7 adults with low back pain (age: 27.14±5.81 years, body weight: 73.10±10.74 kg, height: 176.41±3.13 cm, LBG) participated in this study. LBG was recruited through the VAS pain rating scale. All participants ran on an instrumented treadmill (Bertec, USA). Results: The LBG shows statistically greater vertical acceleration at the distal tibia during running at 3.5 m/s and 4.0 m/s and greater shock attenuation from the distal tibia to the head during running at 3.5 m/s compared with the NLBG during running (p<.05). As the speed increased, there was a statistically significant increase in vertical/resultant acceleration and shock attenuation for both groups. Conclusion: The findings indicated that the runners with low back pain (LBG) experience greater impact and shock attenuation compared with non-low back pain group (NLBG) during fast running. However, it is still inconclusive whether high impact on the lower extremity during running is the main cause of low back pain in the population. Thus, it is suggested that the study on low back pain should observe the characteristics of impact during running with individuals' low back pain experience and clinical symptoms.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.87-92
• /
• 2000

This study is object to structural analysis of running machine frame. The finite element model was developed to compute the stress, strain and natural frequency for running machine frame. For structural analysis using result from FEM Code. In other to structural analysis of running machine frame, many variables such as load condition, boundary condition and weight condition are considered.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.753-757
• /
• 2004

This paper describes a PC-based distributed multi-rate realtime control system using USB protocol, which is developed as a general motion controller. The control system consists of two control programs: one running at 1 kHz sampling rate on a PC with Linux and another running at 10 kHz sampling rate on a remotely located motion control card called RASID (remote axis serial interface device). Two programs communicates through USB at every 1 msec. A USB communication driver is developed to ensured the 1 msec desired communication time. The main program running on the PC generates reference trajectory at 1 kHz and send it to the RASID through USB and RASIDs located near the motors gather the sensor information and execute the low-level control at 10 kHz. The USB-based connectivity reduces the wiring harness and eventually the manufacturing cost of the machine. The multi-rate nature of the developed system improves the control capability. The effect of sampling rate is analyzed and simulated.

• Proceedings of the KAIS Fall Conference
• /
• 2001.11a
• /
• pp.85-90
• /
• 2001

This study is object to structural analysis of household running machine frame. The finite element model was developed to compute the stress, strain and natural frequency for household running machine frame. For structural analysis using result from FEM Code. In other to structural analysis of household running machine frame, many variables such as load condition, boundary condition and weight condition are considered.

• Journal of the Korean Society for Railway
• /
• v.17 no.3
• /
• pp.165-170
• /
• 2014

The resistance to motion of the Korean next-generation high-speed train (HEUM-430X) was assessed on the basis of 12 coasting test runs at coasting speeds up to approximately 380km/h. Two different methods, a linear regression method and a time-integral method, were employed to calculate decelerations from the time-velocity data and the time-distance data, respectively, and an equation of resistance to motion was devised from the deceleration data calculated at each time section. The effect of an improvement of the aerodynamic shape on the resistance to motion was investigated, with the results showing that the running resistance was reduced by about 15% due to these improvements. An increase of approximately 28% of the running resistance was also noted when running in a tunnel relative to running through an open field.

• Journal of the Ergonomics Society of Korea
• /
• v.20 no.1
• /
• pp.63-72
• /
• 2001

Rearfoot control can be defined as the relative ability of a shoe to limit the amount of subtalar joint pronation immediately following footstrike. A normal amount of pronation provides a means of decreasing peak forces experienced by the leg, but excessive pronation of the foot can be arised its injures. The purpose of this study is to compare amount of pronation according to a difference between medial and later hardness of shoe midsole for better design of running shops. The experiment is examined for 7 running shoes. 8 males. to measure the Achilles tendon angle and rearfoot angle using high speed camera. The results is conducted that the changes of Achilles tendon angle significantly differ at each test shoe with increased running speed. And, a difference between medial and lateral hardness of midsole affects rearfoot motion of runner. The displacements of maximal Achilles tendon angle described a amount of pronation motion is decreased when medial hardness of midsole is large more than lateral.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.2
• /
• pp.65-70
• /
• 2002

The rotational performance off machine tool spindle has a direct influence upon the surface finish of the finished workpiece. This running accuracy of the spindle is improved by increasing preload on the bearings, while it results in higher temperature rise and larger thermal deformation. Therefore, finding the optimal preload condition for high speed spindle is very important factors in spindle motion. in spindle motion. In this study, the effect of the preload on the roundness accuracy has been examined at the different cutting conditions. Experiments were carried out to investigate the effects of the bearing preload on the running accuracy of high speed spindle which was supported by two angular contact bearings.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.9-16
• /
• 2007

Cutting movements frequently occur in sports and influence much Lower Extremity injuries. The purpose of this study was to compare joint motion of lower extremities to cutting angles and running velocities. Seven male subjects performed cutting movements to three angles($0^{\circ}$, $30^{\circ}$, $60^{\circ}$). Subjects were instructed to run five meters at a speed of 2.5m/s and 4.5m/s before contacting their right foot on the force plate and then change direction to the left. The Peak hip, knee and ankle joint kinematics were influenced according to the running velocities and cutting angles. In conclusion, Fast running velocity and cutting angle will may influence on the lower extremity joint instability on real game situation.