• 제목/요약/키워드: rubber-based

검색결과 681건 처리시간 0.034초

액정 폴리에스테르/PEN 블렌드 섬유의 성질 (Properties of Liquid Crystalline Polyester/Poly(ethylene 2,6-naphthalate) Blend Fibers)

  • 김원;김영용;손정선;윤두수;한철;최재곤;조병욱
    • Elastomers and Composites
    • /
    • 제37권4호
    • /
    • pp.244-257
    • /
    • 2002
  • 주사슬에 나프탈렌고리와 테트라메틸렌 및 헥사메틸렌 유연격자를 가지면서 트라이어드메소겐을 갖는 새로운 열방성 방향족 액정 폴리에스테르(TLCP)를 용액중합법에 의하여 합성하였다. TLCP의 함량을 달리하는 TLCP/PEN in situ 복합재료를 용융방사하여 연신비가 각각 다른 단섬유를 제조하고 그들의 열적, 기계적 특성 및 모폴로지를 조사하였다. 합성된 TLCP는 네마틱 액정중합체였으며 고체상에서 액정상으로의 전이 온도는 249 ℃였다. 블렌드내의 TLCP 도메인들은 매트릭스 고분자인 PEN에 잘 분산 되었으며 어떠한 거대 상 분리 현상도 보여 주지 않았다. TLCP 함량의 증가에 따른 블렌드내 PEN의 cold crystallization 온도가 낮아진 것으로 보아서 TLCP가 PEN에 대한 조핵제 역할을 하였음을 알 수 있었다. 블렌드 섬유내의 TLCP의 도메인 크기는 대략 40 ~ 50 nm정도의 미세한 크기였으며 매트릭스와의 사이에 좋은 계면 접착력을 보였다. 또한 cold 및 hot-drawing 과정을 거친 낮은 draw ratio(DR)에서는 거의 fibril이 형성되지 않았지만, 높은 DR에서는 잘 발달된 fibril들을 보여 주었다. TLCP의 강화효과로 인하여 10 wt% TLCP/ PEN 블렌드 섬유의 초기 모듈러스는 270 %, 인장강도는 235 %의 증가를 보여주었다. 반면에 신장률은 DR의 증가와 함께 감소 하였다.

매트릭스 시스템에 따른 유구치 인접면 수복물에 대한 3D 스캐너를 이용한 형태학적 평가: 실험실적 연구 (Morphological Assessment of Proximal Restoration Depending on Different Matrix Systems in Primary Molars with a 3D Scanner: In Vitro Studies)

  • 신혜원;이난영;송주헌;김준성;지명관
    • 대한소아치과학회지
    • /
    • 제50권4호
    • /
    • pp.396-408
    • /
    • 2023
  • 이 연구의 목적은 유구치를 재현한 인공치를 대상으로 인접면 복합레진 수복 시 매트릭스 시스템에 따른 인접면의 외형, 접촉면의 크기 및 수복 전과 후의 부피 차이를 비교해 보는 것이다. 네 가지 종류의 인공치에 Circumferential 매트릭스 시스템에 해당하는 Tofflemire Matrix System과 Sectional 매트릭스 시스템에 해당하는 Palodent V3 Sectional Matrix System, myJunior Kit를 이용하여 복합레진을 수복하고 3D 모델링 과정을 거쳐 분석되었다. Sectional 매트릭스 시스템을 사용한 경우에서 오목한 인접면 외형이 형성될 확률이 높았으며 더 큰 접촉 면적과 부피가 형성되었다. 이는 Sectional 매트릭스 시스템에 사용되는 매트릭스 밴드의 완전 연질(Dead soft) 특성에 의한 변형으로 인해 접촉점 주변으로 과량의 레진이 적용될 수 있기 때문이다. 게다가 Sectional 매트릭스 시스템에 포함된 고무 웨지가 매트릭스 밴드를 와동에 잘 적합 시키지 못할 가능성이 있다. 따라서 이번 연구의 결과를 바탕으로 유구치 인접면을 Sectional 매트릭스 시스템을 이용해 복합레진 수복하는 경우, 형태학적 관점을 고려한 신중한 사용이 요구된다.

현대회화에서 드러난 해체의 형식론에 관한 연구 -타의적 해체와 자의적 해체의 성격규정을 중심으로- (A study of the destructive styles from Contemporary Paintings - Focused on distinguishing enmity-destruction and self-destruction -)

  • 박기웅
    • 조형예술학연구
    • /
    • 제7권
    • /
    • pp.5-63
    • /
    • 2005
  • Generally, the meanings of destruction are related in the meaning of demolition, breakdown, into fragments ... and so on, and the similar meanings are twist, crush, demolish, split, cut, into pieces , break up ... etc. Further, it has related in the cruelty and destructive heart which are linked with orgy, Sadism, Necrophilia and so on. The meanings are also expressed by the initial , which are deprivation, deface, defame, deform, degrade, delegitimize, denounce , deride, destroy, devalue, as well as debase, debunk, declaim, declassify, decry, delete, denigrate, deprecate, despise or detract ...and so on. Dario Gamboni has discussed the meaning in his book as two categories Iconoclasm and Vandalism. And the similar meanings could be found in the words which has the initial of , like abase, abate, abhor, abjure, abolish, abridge, abuse ...and so on. Even though the distinct meanings of Iconoclasm and Vandalism, it is not easy to distinguish clearly between the differences when the results are accomplished in contemporary paintings because of the similarity of the results. In korean vocabulary there are no similar words to distinguish between the meanings of destruction and deconstruction, and the deconstruction is not recorded in the general dictionaries. However the meaning of is diminishing, separation, contrast and so on. So the unification of the word as do-construction is not construct, minus construction, reverse construction. And Vincent Ditch explained that there are the meaning of destroy the text. From Jacques Derrida, the deconstruction strategy is to criticise the world of traditional metaphysics and logocentrism, and not to reconstruire the philosophical meaning of texts but $d\'{e}construire$ them. And Saussure emphasized that the signifers could have more meaning that there can be more signified in traditional texts in the art. as a result, deconstruction is explained that there are many signified meanings in a signifer. In this thesis , from using the meanings of destruction and deconstruction, to distinguish the expressive skills in contemporary art works are arising. Therefore, special methods which are linked in the destruction styles are selected. As a result, the two different purposes of destruction is arising, one is enmity destruction and the other is self destruction another word, auto destruction or destruction to create The enmity destruction can be distinguished by the two category Iconoclasm and Vandalism. They come from the moment of different historical aspect is arising and want to attack the Icon or masterpiece this concept is from the study of John Philips and especially iconoclasm is linked with religious and artistic heart, but Vandalism is come from the political attack. Sometime, this distinguish is not clearly arising, because the two aspects are co-related in the attack. As a result, firstly, the Iconoclastic controversy had arisen in the methods of Dadaism which has developed by Man Ray, Francis Picabia and Marcel Duchamp. They want to attack the pre-established master-pieces and painting spaces, and they had 'non-artistic attitude' not to be art. Since 1980, the German artist Anselm Kiefer adapted the methods and made them his special skills so he had tried to paint tough brush strokes and draw with hugh pallette image line and fire and water images , they can be the image attack as the Iconoclasm. secondly, the model of vandalism is to be done by hammer, drill, canon and so on. the method is to attack the content of painting. Further, the object of destruction is bound by cords and iron lings to demolish or to declare the authority of pre-statues; it symbolize the pre-authority is gone already. Self-destruction based paintings are clearly different in the purpose of approaching the art work. First of all, they can be auto-destruction, creative destruction and metamorphosis destruction, which is linked with the skill the material aspect and basic stature, and sign destruction or signifier destruction, which is link with the inner meaning destruction that is considered as the Semiotical destruction in post-modern paintings. Since 1960, the auto destruction is based on the method of firing, melting, grinding and similar skills, which is linked with Neo-Dada and reverse-assemblage. Metamorphosis destruction is strongly linked with the basic inner heart price and quality, so it can be resulted in the changedness of expectation and recognition. Tony Cragg has developed the skills to metamorphose the wood as stone or iron as cloth and stone as sponge and rubber and so on. The researcher has developed the same style in the series of since 2003. The other self-destructive methods are found in the skill of sign destruction. In the methods the meaning of the art is not fixed as one or two, but is developed multi-meaning and differ from original starting situation, so Jacques Derrida called the difference meaning in deconstruction. It is the destruction of textes. These methods are accomplished by David Salle, Francesco Clemente, and recently Tracy Emin, who has developed the attacking heart in the spectators' emotion. Sometime in the method of self-destruction, it is based on horror and shock, the method is explored by Demian Hirst and Jakes and Dinos Chapman. Their destructive styles stimulate ambivalent heart and destroy original sign of girl and animals.

  • PDF

디지털 이미지 처리와 강형식 기반의 무요소법을 융합한 시험법의 모서리 점과 이미지 해상도의 영향 분석 (Analysis of the Effect of Corner Points and Image Resolution in a Mechanical Test Combining Digital Image Processing and Mesh-free Method)

  • 박준원;정연석;윤영철
    • 한국전산구조공학회논문집
    • /
    • 제37권1호
    • /
    • pp.67-76
    • /
    • 2024
  • 본 논문에서는 역학적 변수들을 측정하는 방안으로 디지털 이미지 프로세싱과 강형식 기반의 MLS 차분법을 융합한 DIP-MLS 시험법을 소개하고 추적점의 위치와 이미지 해상도에 대한 영향을 분석하였다. 이 방법은 디지털 이미지 프로세싱을 통해 시료에 부착된 표적의 변위 값을 측정하고 이를 절점만 사용하는 MLS 차분법 모델의 절점 변위로 분배하여 대상 물체의 응력, 변형률과 같은 역학적 변수를 계산한다. 디지털 이미지 프로세싱을 통해서 표적의 무게중심 점의 변위를 측정하기 위한 효과적인 방안을 제시하였다. 이미지 기반의 표적 변위를 이용한 MLS 차분법의 역학적 변수의 계산은 정확한 시험체의 변위 이력을 취득하고 정형성이 부족한 추적 점들의 변위를 이용해 mesh나 grid의 제약 없이 임의의 위치에서 역학적 변수를 쉽게 계산할 수 있다. 개발된 시험법은 고무 보의 3점 휨 실험을 대상으로 센서의 계측 결과와 DIP-MLS 시험법의 결과를 비교하고, 추가적으로 MLS 차분법만으로 시뮬레이션한 수치해석 결과와도 비교하여 검증하였다. 이를 통해 개발된 기법이 대변형 이전까지의 단계에서 실제 시험을 정확히 모사하고 수치해석 결과와도 잘 일치하는 것을 확인하였다. 또한, 모서리 점을 추가한 46개의 추적점을 DIP-MLS 시험법에 적용하고 표적의 내부 점만을 이용한 경우와 비교하여 경계 점의 영향을 분석하였고 이 시험법을 위한 최적의 이미지 해상도를 제시하였다. 이를 통해 직접 실험이나 기존의 요소망 기반 시뮬레이션의 부족한 점을 효율적으로 보완하는 한편, 실험-시뮬레이션 과정의 디지털화가 상당한 수준까지 가능하다는 것을 보여주었다.

치과용 아말감과 레진에 대한 치과종사자의 안전성에 대한 관리행동 실태 (Behaviors-Based Safety Management of Dental Professionals on Dental Amalgam and Resin)

  • 윤성욱;남인숙
    • 치위생과학회지
    • /
    • 제13권1호
    • /
    • pp.97-104
    • /
    • 2013
  • 본 연구는 치과재료의 유해인자로부터 치과종사자들의 진료실내의 유해인자로부터 노출을 최소화시키기 위해 치과종사자들의 치과수복재료인 아말감과 레진에 대한 안전성 관리행동에 대해 설문을 하여 다음과 같은 결과를 얻었다. 1. 치과용 아말감과 레진 종류에 따른 사용여부는 아말감 85.8%, 컴포지트 레진은 100%, 아크릴 레진과 트레이용 레진은 각각 97.8%, 95.7%를 사용한다고 응답하였다. 치과용 아말감과 레진의 유해성에 대한 인식은 치과용 아말감은 95.2%, 레진의 유해성에 대한 인식은 36.5%가 잘 알고 있다고 응답하였다. 2. 레진 사용 시 안전성에 관한 관리 행동사항은 4점 척도로 점수가 높을수록 안전성에 관한 관리 행동이 낮은 것을 의미하고 전체평균은 1.99로 조사되었으며 안전성 행동의 실천성이 가장 낮은 항목은 평균 2.50으로 '레진 취급 시 실내공기를 환기시킨다'가 나타났으며 '치과재료를 사용 시 관리지침서에 주의사항을 숙지한다'는 1.04로 안전성 관리행동이 가장 양호하게 나타났다. 3. 치과용 아말감 사용 시 안전성에 관한 관리 행동은 평균이 1.83이며 안전성 관리행동이 가장 낮게 나타난 항목은 평균 2.89로 '아말감 취급 시 환자에게 러버댐을 장착한다', '아말감 사용 후 실내공기를 환기시킨다'가 2.78이며 치과용 아말감 사용 시 안전성 관리 행동이 가장 잘 되는 항목은 '남은 아말감은 뚜껑이 있는 용기에 보관한다'가 1.40, '아말감 사용 후 폐기물 처리법에 의해 처리한다'는 1.42로 나타났다. 4. 일반적인 특징에 따른 치과용 아말감과 레진 사용 시 안전성 관리 행동의 결과 아말감은 모든 특징에서 유의성을 나타냈으며 레진은 직장 내 직위와 근무경력이 통계적 유의성을 나타냈다(p<0.05). 아말감에 대한 안전성 관리행동은 연령이 20~25세가 2.06으로 높은 연령대보다 저조하였으며 학력은 고졸, 전문대졸, 대졸이 각각 2.38, 1.97, 1.77로 나타나 학력이 높은 대상이 양호한 결과를 나타냈다. 근무장소는 종합병원(대학병원)이 1.69로 실천성이 가장 양호했다. 직장 내 직위는 아말감과 레진이 각각 수석치과위생사가 1.84, 1.68로 안전성 관리행동이 좋게 나타났으며 경력은 아말감인 경우 1~3년이 1.89, 10년 이상 1.96, 레진은 10년 이상이 1.67로 나타나 경력은 대체적으로 높은 경 우 실천성이 높았다. 5. 치과용 아말감 및 레진의 사용 시 안전성 관리행동과 일반적인 특징과의 상관관계에서 아 말감과 통계적으로 유의하게 상관관계를 나타낸 일반적인 특징은 학력(p<0.05)과 직장 내 직위(p<0.05)이며 레진 사용 시 안전성 관리행동과 통계적 유의성을 나타낸 일반적인 특징은 연령(p<0.05)과 직장 내 직위(p<0.05)로 나타났다. 이상의 결과를 볼 때 치과의료기관 종사자들에게 치과재료 취급 시 재료에 대한 유해성 교육이 지속적으로 전달되어야 하며 주의사항을 꼭 숙지하여 안전성 관리행동이 올바르게 이루어짐으로 친환경적인 근무환경을 만들고 유해한 화학물질부터 치과종사자들의 건강을 예방하는 데 적극 노력하여야 할 것이다.

시설재배 참외 수확 로봇용 엔드이펙터의 설계 요인 분석 (Design Factor Analysis of End-Effector for Oriental Melon Harvesting Robot in Greenhouse Cultivation)

  • 하유신;김태욱
    • 생물환경조절학회지
    • /
    • 제22권3호
    • /
    • pp.284-290
    • /
    • 2013
  • 본 연구는 시설재배에서 참외를 수확할 수 있는 로봇의 엔드이펙터를 개발하기 위한 전단계로서, 참외의 엔드이펙트 중에서 소프트 핸드링이 가능한 그립퍼와 참외줄기를 절단하는 커터를 설계하기 위해 참외의 기하학, 압축, 절단, 마찰 특성 등을 분석하였다. 그 결과 참외의 길이는 평균 108mm, 직경은 중간지점에서 평균 70mm, 중량은 평균 188g, 부피는 평균 333mL, 진원도는 평균 3.8mm로 나타났다. 참외의 중량(W)에 대하여 길이(L)와 직경(D2)을 변수로 하는 식 $W=L^a{\times}D_2^b$로부터 비선형 회귀분석을 실시한 결과 a는 2.0279, b는 -0.9998의 상수값을 가지는 상관관계가 있는 것으로 나타났다. 참외줄기의 지름은 평균 3.8mm이며, 참외 줄기는 중심으로부터 반경 5mm 범위 내에서 대부분 분포하였다. 참외의 항복치와 압축강도, 경도의 평균값은 각각 $36.5N/cm^2$, $185.7N/cm^2$, $636.7N/cm^2$이며, 참외 줄기의 절단력과 절단강도는 각각 $2.87{\times}10^{-2}N$$5.60N/cm^2$로 나타났다. 참외의 마찰계수는 고무가 0.609으로 가장 높게 나타났고, 그 다음으로 알루미늄이 0.393, 스테인레스강이 0.177, 테프론이 0.079로 나타났다. 분석된 자료를 토대로 엔드이펙터 설계시 동작에 따른 위치 오차와 안전율을 감안하여, 그립퍼의 및 커터의 크기, 선회반경, 설치위치, 구동모터의 동력, 재료 및 재질의 선정 등에 적용할 수 있을 것으로 판단되었다.

토양 및 지하수 Investigation 과 Remediation에 대한 현장적용

  • Wallner, Heinz
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2000년도 추계학술대회
    • /
    • pp.44-63
    • /
    • 2000
  • Situated close to Heathrow Airport, and adjacent to the M4 and M25 Motorways, the site at Axis Park is considered a prime location for business in the UK. In consequnce two of the UK's major property development companies, MEPC and Redrew Homes sought the expertise of Intergeo to remediate the contaminated former industrial site prior to its development. Industrial use of the twenty-six hectare site, started in 1936, when Hawker Aircraft commence aircraft manufacture. In 1963 the Firestone Tyre and Rubber Company purchased part of the site. Ford commenced vehicle production at the site in the mid-1970's and production was continued by Iveco Ford from 1986 to the plant's decommissioning in 1997. Geologically the site is underlain by sand and gravel, deposited in prehistory by the River Thames, with London Clay at around 6m depth. The level of groundwater fluctuates seasonally at around 2.5m depth, moving slowly southwest towards local streams and watercourses. A phased investigation of the site was undertaken, which culminated in the extensive site investigation undertaken by Intergeo in 1998. In total 50 boreholes, 90 probeholes and 60 trial pits were used to investigate the site and around 4000 solid and 1300 liquid samples were tested in the laboratory for chemical substances. The investigations identified total petroleum hydrocarbons in the soil up to 25, 000mg/kg. Diesel oil, with some lubricating oil were the main components. Volatile organic compounds were identified in the groundwater in excess of 10mg/l. Specific substances included trichloromethane, trichloromethane and tetrachloroethene. Both the oil and volatile compounds were widely spread across the site, The specific substances identified could be traced back to industrial processes used at one or other dates in the sites history Slightly elevated levels of toxic metals and polycyclic aromatic hydrocarbons were also identified locally. Prior to remediation of the site and throughout its progress, extensive liaison with the regulatory authorities and the client's professional representatives was required. In addition to meetings, numerous technical documents detailing methods and health and safety issues were required in order to comply with UK environmental and safety legislation. After initially considering a range of options to undertake remediation, the following three main techniques were selected: ex-situ bioremediation of hydrocarbon contaminated soils, skimming of free floating hydrocarbon product from the water surface at wells and excavations and air stripping of volatile organic compounds from groundwater recovered from wells. The achievements were as follows: 1) 350, 000m3 of soil was excavated and 112, 000m3 of sand and gravel was processed to remove gravel and cobble sized particles; 2) 53, 000m3 of hydrocarbon contaminated soil was bioremediated in windrows ; 3) 7000m3 of groundwater was processed by skimming to remove free floating Product; 4) 196, 000m3 of groundwater was Processed by air stripping to remove volatile organic compounds. Only 1000m3 of soil left the site for disposal in licensed waste facilities Given the costs of disposal in the UK, the selected methods represented a considerable cost saving to the Clients. All other soil was engineered back into the ground to a precise geotechnical specification. The following objective levels were achieved across the site 1) By a Risk Based Corrective Action (RBCA) methodology it was demonstrated that soil with less that 1000mg/kg total petroleum hydrocarbons did not pose a hazard to health or water resources and therefore, could remain insitu; 2) Soils destined for the residential areas of the site were remediated to 250mg/kg total petroleum hydrocarbons; in the industrial areas 500mg/kg was proven acceptable. 3) Hydrocarbons in groundwater were remediated to below the Dutch Intervegtion Level of 0.6mg/1; 4) Volatile organic compounds/BTEX group substances were reduced to below the Dutch Intervention Levels; 5) Polycyclic aromatic hydrocarbons and metals were below Inter-departmental Committee for the Redevelopment of Contaminated Land guideline levels for intended enduse. In order to verify the qualify of the work 1500 chemical test results were submitted for the purpose of validation. Quality assurance checks were undertaken by independent consultants and at an independent laboratory selected by Intergeo. Long term monitoring of water quality was undertaken for a period of one year after remediation work had been completed. Both the regulatory authorities and Clients representatives endorsed the quality of remediation now completed at the site. Subsequent to completion of the remediation work Redrew Homes constructed a prestige housing development. The properties at "Belvedere Place" retailed at premium prices. On the MEPC site the Post Office, amongst others, has located a major sorting office for the London area. Exceptionally high standards of remediation, control and documentation were a requirement for the work undertaken here.aken here.

  • PDF

광중합형 복합레진과 shade guide의 색차에 관한 연구 (A Spectrophotometric Study on Color Differences between Various Light-Cured Composite Resins and Shade Guides)

  • 임경민;이민호;송광엽
    • 구강회복응용과학지
    • /
    • 제25권1호
    • /
    • pp.13-22
    • /
    • 2009
  • 심미적인 특성을 가진 복합레진은 전치부 수복용 재료로 많이 이용되고 있다. 복합레진 수복 시 만족스러운 결과를 얻기 위해서는 색조의 선택이 중요한 역할을 한다. 현재 대부분의 수복용 복합레진은 Vita Lumin 색조견본(shade guide)이나 각각의 회사에서 제공하는 색조견본을 사용하고 있으나, 색조 견본 사이의 색차와 수복물과 견본 사이에 색차가 예상되어 그 차이를 규명하여 임상적인 선택 시에 도움이 되고자 하였다. 4종의 광중합 복합레진(Gradia Direct (GD), Z250 (Z250), Clearfil AP-X (AP-X), $Esthet{\cdot}X$ ($E{\cdot}X$))과 A2와 A3의 색조 견본을 사용하였다. 각 재료마다 3개의 시편과 1개의 색조 견본을 제작하였다. Teflon 주형(깊이 1.35 mm, 직경 8 mm)에 각각의 복합레진을 채우고 응축한 후에 중합하여 젖은 사포로 연마하였다. 색조 견본을 연마용 stone과 고무를 이용하여 1.35 mm 두께로 연마하였다. 컴퓨터에 의해 조절되는 spectrophotometer(color i5, GretagMacbeth, USA)를 이용하여 시편과 색조견본의 색의 특성을 CIELAB coordinates ($L^*$, $a^*$, $b^*$)로 평가하였다. CIELAB 계측을 통하여 복합레진과 색조 견본의 색차(${\Delta}E^*ab$)를 비교 평가 하였다. 광원으로는 CIE standard D65를 사용하였다. 다음과 같은 결과를 얻었다. 1. 동일한 shade로 설계된 여러 제조회사의 복합레진 시편의 $L^*$, $a^*$, $b^*$ 값 간에 유의할 만한 수준의 차이를 나타냈다(p<0.05). 2. 동일한 shade로 설계된 여러 제조회사의 복합레진 시편 간에 대부분 육안으로 인지할 만한 색차(${\Delta}E^*ab>3.3$)값을 나타냈다. 3. 동일한 shade로 설계된 여러 제조회사의 복합레진과 제조회사에서 제공되는 shade guide 및 Vita Lumin shade guide 간에 대부분 육안으로 인지할 만한 색차(${\Delta}E^*ab>3.3$)값을 나타냈다. 4. 임상에서 보다 나은 색 조화를 얻어 심미성을 향상시키기 위해서는 실제 수복물로 제작한 custom shade guide의 제작이 필요할 것으로 생각된다. 제조사에 의해 제공되는 색조 견본이나 Vita Lumin 색조 견본은 임상의에게 복합레진의 색조 선택 시에 정확한 기준을 제공하지는 않았고, 대부분의 제품에서 인지할 수 있는 색차가 있었다. 그러므로 보다 나은 색조 선택을 위해 수복용 레진으로 제작한 맞춤형 색조 견본을 사용하는 것을 추천한다.

Laser Doppler flowmeter를 이용한 치수혈류 측정 (MEASUREMENT OF PULPAL BLOOD FLOW USING A LASER DOPPLER FLOWMETER)

  • 반태환;이재상;김성교
    • Restorative Dentistry and Endodontics
    • /
    • 제24권4호
    • /
    • pp.560-569
    • /
    • 1999
  • 치수생활력이란 치수내의 혈관의 상태를 가리킨다. 치수생활력 측정을 위해서 사용되어져 온 온도검사나 전기치수 검사는 치수신경의 반응에 기초하여 간접적으로 치수의 생활력을 판단하는 방법이다. 따라서 치수생활력의 판단을 위해서 치수생활력의 기본인 치수혈류를 파악할 필요가 있어 laser Doppler flowmeter를 이용하여 치수 혈류를 측정하는 방법이 연구되었다. 본 연구에서는 성인치아에서 치수생활력 검사를 위해 laser Doppler flowmeter를 이용하여 치수혈류를 측정 할 경우 생활력의 판단 근거로 참고할 수 있는 정상혈류 측정치의 기초자료를 마련할 목적으로, laser Doppler flowmeter를 이용하여 성인의 상악 중절치에서부터 제1대구치에 이르기까지 각 정상 치아의 치수혈류를 측정하고, probe 고정용 splint 제작 방법 및 생활치수와 실활치수에 따른 치수혈류 측정치의 차이를 비교, 연구하였다. 22세에서 30세까지 성인 남녀 79명을 대상으로 상악 중 절치에서부터 제1대구치에 이르기까지 laser Doppler flowmeter를 사용하여 치수혈류를 측정하였고, 생활치아에 대한 비교군으로는 실활치아라고 판단되는 치아를 가진 성인 남녀 자원자 5명의 치아 13개도 함께 검사하였다. 혈류 측정 probe고정용 splint제작을 위한 고무인상시 직접법에서는 환자 구강내에서 직접 고무인상을 채득하였고, 간접법에서는 구강내에서 일차 인상을 채득하여 만든 석고모형상에서 probe 위치를 표시한 다음 석고모형상에서 이차적으로 고무인상을 채득하였다. 고무인상에서 치관부에 probe 고정을 위한 hole을 형성하고 probe를 삽입, 고정한 다음 probe를 치아 협면에 적용하였다. Laser Doppler flowmeter에서 안정된 신호가 나타날 때까지 피검자를 10분 이상 동안 안정시켰으며 안정상태 도달 후 각 치아마다 5 분간 지수혈류를 기록하였다. 측정된 치수혈류는 'Perisoft'(Perimed Co., Sweden) 프로그램을 이용하여 컴퓨터에 저장한 후 측정치를 계측하였다. 각 치아간의 실험치 평균의 차이는 일원 변량 분석법(one-way ANOVA) 및 Duncan's Multiple Range test를 이용하여 분석하였으며, 다음과 같은 결과를 얻었다. 1. 상악 중절치에서부터 제1대구치에 이르기까지 시험대상 전 치아에서의 치수혈류 측정치 평균은 9 - 16 Perfusion Unit 사이로 나타났는데, 상악 측절치에서 가장 높게 나타났고, 제1소구치, 제2소구치, 견치, 중절치, 제1대구치의 순으로 높게 나타났다(p<0.01). 2. 상악 6전치에서는 간접인상법으로 제작된 splint 적용군이 직접인상법으로 제작된 splint 적용군에 비해 높은 측정치를 나타내었으나(p<0.01). 소구치 및 대구치에서는 측정치에 있어서 차이를 나타내지 않았다(p>0.05) 3. 생활치아에서는 실활치아에 비해 현저히 높은 측정치를 나타내었고(p<0.01). 측정선의 양상은 심장 박동과 일치하는 파동성 및 율동성을 나타내었다.

  • PDF

복합레진의 광중합 전·후와 shade guide의 색차 비교 (COLOR DIFFERENCES BETWEEN RESIN COMPOSITES BEFORE- AND AFTER-POLYMERIZATION, AND SHADE GUIDES)

  • 전이주;조성식;엄정문
    • Restorative Dentistry and Endodontics
    • /
    • 제24권2호
    • /
    • pp.299-309
    • /
    • 1999
  • The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.

  • PDF