• The Research Journal of the Costume Culture
• /
• v.25 no.3
• /
• pp.270-284
• /
• 2017

This study aimed to create 3D-printed insoles for flat-footed senior men using 3D systems. 3D systems are product-manufacturing systems that use 3-dimensional technologies like 3D scanning, 3D modeling, and 3D printing. This study used a 3D scanner (NexScan2), 3D CAD programs including Rapidform, AutoCAD, SolidWorks, Nauta+ compiling program, and a 3D printer. In order to create insoles for flat-footed senior men, we analyzed horizontal sections of 3D foot scans We selected 20 flat-footed and 20 normal-footed subjects. To make the 3D insole models, we sliced nine lines on the surface of the subjects' 3D foot scans, and plotted 144 points on the lines. We calculated the average of these 3D coordinates, then located this average within the 3D space of the AutoCAD program and created 3D sole models using the loft surface tools of the SolidWorks program. The sole models for flat feet differed from those of normal feet in the depth of the arch at the inner sideline and the big toe line. We placed the normal-footed sole model on a flat-footed sole model, and the combination of the two models resulted in the 3D insole for flat feet. We printed the 3D modeled insole using a 3D printer. The 3D printing material was an acrylic resin similar to rubber. This made the insole model flexible and wearable. This study utilized 3D systems to create 3D insoles for flat-footed seniors and this process can be applied to manufacture other items in the fashion industry as well.

• Elastomers and Composites
• /
• v.48 no.3
• /
• pp.190-194
• /
• 2013

In this study, sebacic acid made from castor oil was used as monomer with isophthalic acid and glycols for polyester polyol synthesis. Polyurethane adhesive was synthesized from the various polyester polyol. From the result of adhesion strength test, polyester polyol made from sebacic acid showed better adhesive force than that of adipic acid due to higher cohesive energy. Branched glycol containing methyl group represented better adhesion than linear glycol. In the chain extender, adhesion strength increased going from PG, EG, BD. From the measurement of TGA, BD showed the best heat stability, and followed by PG, EG. Glass transition temperature increased in the order PG, EG, BD by the result of DMA.

• Journal of Environmental Health Sciences
• /
• v.43 no.5
• /
• pp.360-369
• /
• 2017

Objectives: The organizational culture of small-scale enterprises is influenced by a lack of awareness of industrial accidents and a business-oriented culture. Therefore, the purpose of this study is to establish a correlation between chemical awareness and worker safety, which is the reason why a company's safety environment is responsible for human factor accidents. Methods: The research model established the organizational culture, human relationships, organizational relationships, workplace culture, safety climate, and safety parameters, all of which affect the perception of chemical substances, then established safety rankings, communication, safety regulations, and safety support. Results: In order to derive the results of this study, the satisfaction level was mostly derived from the degree of engagement (+) depending on the number of years worked, in the hierarchical regression analysis. During work with chemicals, the number of years spent on the level of the service was determined by the influence of the chemical (-). Based on this company, the occurrence of chemical accidents caused by chemical materials was felt to be felt at the risk of causing the hazard to be felt, the absence of physical damage was excluded from the variables. The other variables detected in the variables were $62.8{\pm}24.4$. Conclusion: As a result, it is necessary to develop a statistical model for the verification of the hierarchical regression analysis, and the relationship between safety and awareness of the dangers of chemicals and biological agents requires periodic safety training. Job satisfaction was found to be higher if the level of awareness was sufficient.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.2 s.24
• /
• pp.115-124
• /
• 2007

The initial shape is arrived at by a self-formation process, which accomplishes a form in the natural world, or is determined analytically by considering the equilibrium of initial stress only. Therefore, the self-formation process, which accomplishes a form in the natural world is grasped and the types of modeling techniques available to find the shapes of soft structures are well investigated and classified. To establish a form-finding modeling techniques, the models of string, soap film, fabric, rubber, plaster, and etc. are used. These modeling techniques can be used as a method of understanding the characteristics of structures when the material of model shows similar characteristics. Generally, the model test confirms the structure based on numerical analysis, at the same time it is important preceding process to develop such a program. With the above process, the relationship between model test and numerical analysis becomes a feedback process. Therefore, in this study, two examples which have been accomplished from such a technique are investigated and considered according to modeling process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.11
• /
• pp.841-845
• /
• 2013

We give a textured front on silicon wafer for high-efficiency solar cells by using micro contact printing method which uses PDMS (polydimethylsiloxane) silicon rubber as a stamp and SAM (self assembled monolayer)s as an ink. A random pyramidal texturing have been widely used for a front-surface texturing in low cost manufacturing line although the cell with random pyramids on front surface shows relatively low efficiency than the cell with inverted pyramids patterned by normal optical lithography. In the past two decades, the micro contact printing has been intensively studied in nano technology field for high resolution patterns on silicon wafer. However, this promising printing technique has surprisingly never applied so far to silicon based solar cell industry despite their simplicity of process and attractive aspects in terms of cost competitiveness. We employ a MHA (16-mercaptohexadecanoic acid) as an ink for Au deposited $SiO_2/Si$ substrate. The $SiO_2$ pattern which is same as the pattern printed by SAM ink on Au surface and later acts as a hard resist for anisotropic silicon etching was made by HF solution, and then inverted pyramidal pattern is formed after anisotropic wet etching. We compare three textured surface with different morphology (random texture, random pyramids and inverted pyramids) and then different geometry of inverted pyramid arrays in terms of reflectivity.

• Earthquakes and Structures
• /
• v.9 no.3
• /
• pp.657-671
• /
• 2015

The level of ductility is determined by depending on the intended use of the building, the region's seismic characteristics and the type of structural system when buildings are planned by engineers. Major portion of seismic energy is intended to be consumed in the plastic zone in structural systems of high ductility, so the occurrence of damages in load bearing and non-load bearing structural elements is accepted in planning stage under severe earthquakes. However, these damages must be limited among specific values in order not to endanger buildings in terms of the bearing capacity. Isolators placed between the basement and upper structure make buildings behave elastically by reducing the effects of seismic loads and improving seismic performance of building significantly. Thus, damages can be limited among desired values. In this study, the effectiveness of seismic isolation is investigated on both fixed based and seismic isolated models of a hospital building with high ductility level with regard to lateral displacements, internal forces, structural periods and cost of the building. Layered rubber bearings are interposed between the base of the structure and foundation. Earthquake analysis of the building are performed using earthquake records in time domain (Kocaeli, Loma Prieta and Landers). Results obtained from three-dimensional finite element models are presented by graphs and tables in detail. That seismic isolation reduces significantly the destructive effects of earthquakes on structures is seen from the results obtained by seismic analysis.

• Structural Engineering and Mechanics
• /
• v.66 no.3
• /
• pp.411-421
• /
• 2018

Although a rubber isolation cushion can reduce the dynamic response of a structure itself, it has little influence on the height of a sloshing wave and even may induce magnification action. Vertical baffles are set into a base-isolated Concrete Rectangular Liquid Storage Structure (CRLSS), and baffles are opened as holes to increase the energy dissipation of the damping. Problems of liquid nonlinear motion caused by baffles are described using the Navier-Stokes equation, and the space model of CRLSS is established considering the Fluid-Solid Interaction (FSI) based on the Finite Element Method (FEM). The dynamic response of an isolated CRLSS with various baffles under an earthquake is analyzed, and the results are compared. The results show that when the baffle number is certain, the greater the number of holes in baffles, the worse the damping effects; when a single baffle with holes is set in juxtaposition and double baffles with holes are formed, although some of the dynamic response will slightly increase, the wallboard strain and the height of the sloshing wave evidently decrease. A configuration with fewer holes in the baffles and a greater number of baffles is more helpful to prevent the occurrence of two failure modes: wallboard leakage and excessive sloshing height.

• Elastomers and Composites
• /
• v.39 no.1
• /
• pp.36-41
• /
• 2004

Solid polymer electrolytes were prepared by UV irradiation of the blends consisting of poly(ethylene oxide)(PEO), epoxy diacrylate(EDA) and LiClO_4$. Conductivities of the electrolyte films were measured as a function or blend composition, salt concentration and temperature. The electrolyte having the composition of poly(ethylene oxide) (70% by weight)/epoxy diacrylate (30% by weight) with mole ratio of 10 of ethylene $oxide/Li^+$ exhibited a high ionic conductivity of $1.2{\times}10^{-5} S/cm$ at $25^{\circ}C$. This blend is transparent and shows elastomeric properties. Morphological studies by means of differential scanning calorimetry, X-ray diffraction and polarized optical microscopy indicated that the cured epoxy chains in the blends inhibit the crystallization of poly (ethylene oxide) and thereby induce the blend systems to be completely amorphous in certain compositions.

• Elastomers and Composites
• /
• v.44 no.3
• /
• pp.209-221
• /
• 2009

Polyolefins are important commodity polymers with the largest volume of business owing to their outstanding combination of cost performance and excellent physical properties. However, the lack of functional groups often has limited their end uses, such as compatibilizer, modifier and adhesive, where the interaction with other materials is especially important. The incorporation of functional groups as polymer segments to afford block or graft polyolefin copolymers has been extensively investigated in the context of the functional polyolefin hybrids. Living polymerization processes have been considered to be an efficient method to prepare the polyolefin hybrids with precisely controlled architecture and compositions. Among the living polymerization techniques, controlled/"living" radical polymerization (CRP) methods are very effective not only because of the controllability of polymerization but also because of the versatility of monomers and polymerization conditions. In this review paper, progresses on the preparations of polyolefin graft or block copolymers through CRP techniques are summarized. The commodity polymers such as polyisobutylene, polyethylene and polypropylene are combined with polar segments such as polyacrylate, polymethacrylate, polystyrene to yield functionalized polyolefins.

• Journal of the Korean Chemical Society
• /
• v.57 no.3
• /
• pp.329-334
• /
• 2013

A pine needle-embedded graphite enzyme electrode, of which bonding agent is CSM rubber, was newly designed and its electrochemistry was studied based on the amperometry. It involved a ground green leaves of pine tree as a zymogen together with electrochemical mediator, ferrocene within the paste. The plots of ln($i(1-e^{nf{\eta}})$) vs. ${\eta}$ and Lineweaver-Burk at the low potential (-100 to -500 mV) showed good linearities indicating that the amperometric response is by the catalytic power of pine peroxidase. Electrochemical parameters obtained, symmetry factor (${\alpha}$, 0.17), limiting current ($i_1$, 1.99 $A/cm^2$), exchange current density ($i_0$, $5.86{\times}10^{-5}\;A/cm^2$), Michaelis constant ($K_M$, $1.68{\times}10^{-3}$ M) and many others showed that pine peroxidase discharges the role of catalyst quantitatively on the electrode surface. Those proved that the practical use of pine peroxidase is promising in place of the marketed.