• 한국환경과학회지
• /
• 제10권4호
• /
• pp.311-314
• /
• 2001

The asphalt mixture with CRM(Crumb Rubber Modifier) is known to show a better performance in resisting thermal cracking, fatigue cracking and rutting compared with the conventional mixture. The laboratory tests on the physical characteristics of indirect tensile strength, density, flow and Marshall value of the CRM asphalt were conducted. The test results show that CRM asphalt has better physical characteristics than that of conventional asphalts. And the analysis on the noise reduction effect, penetration capacity from the field test on the national road in Haksan of Chungbuk, and recycling of tire waste were conducted. From this study, the results show that 1% CRM asphalt has higher the noise reduction effect and penetration capacity that those of conventional asphalts. And, optimal contents of crumb rubber modifier in the asphalt binder is one percent. In this case, crumb rubber modifier were used 10 kg to make the asphalt binder of one cubic meter. So it was named as Eco-asphalt.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.553-556
• /
• 2003

This study is analyzed about the factor of adhesive strength characteristics, curing time, asphalt application, test temperature which are liquid waterproofing membrane of rubber-asphalt and chloroprene-rubber type for concrete bridge deck. According to the results, curing time is shorter, adhesive strength is less in chloroprene-rubber type. And also chloroprene-rubber and rubber-asphalt type are showed high adhesive strength in low temperature.

• 한국도로학회논문집
• /
• 제11권3호
• /
• pp.33-40
• /
• 2009

폐타이어 고무분말은 도로 유지 및 보수제로 아스팔트 바인더의 개질제로 사용되고 있다. 도로보수제인 폐타이어 고무분말 개질 아스팔트 (crumb rubber modified asphalt, CRMA) 실란트에 필요한 접착특성은 저온에서 아스팔트 바인더의 취성과 접착파괴특성 때문에 주목받고 있다. 본 연구에서는 저온에서 CRMAs의 개질제로서 유연제의 영향을 조사하였다. 저온에서 CRMAs의 특성은 침입도, 연화점, 인장 및 인장접착시험을 통하여 측정하였다. 유연제를 도입한 CRMAs에서 CR과 아스팔트바인더의 연성변형이 증가함에 따라 인장접착강도와 변형률이 증가하였다. 저온영역에서 CRMAs의 인장특성과 접착특성은 유연제의 함량이 중요한 요소임을 발견하였다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.180-185
• /
• 1998

The study was conducted to evaluate the fundamental properties of waste tire asphalt concretes using polymer modified hinder that were made by dry process. The specimens of four types of polymer modified asphalt concretes were prepared, then Marshall test and indirect tensile strength tests were performed on these samples. The results showed that polymer modified waste tire rubber asphalt concrete was acceptable for the material of asphalt pavement surface layer.

• Elastomers and Composites
• /
• 제43권2호
• /
• pp.72-81
• /
• 2008

포장도로의 소성변형을 줄여보고자 개질아스팔트가 나타나고 있다. 본 연구에서는 타이어 고무 등을 이용하여 개질된 아스팔트의 물성을 알아 보았다. 마샬안정도와 인장강도가 각각 98% 및 43% 증가하여 타이어 고무의 개질효과를 알 수 있었다. 점도, 침입 및 열 분석에서 아스팔트의 변형저항성이 향상되었음을 알 수 있었다. IR 및 GPC 실험에서 개질제의 구조가 아스팔트의 구조와 유사할 경우 두 화합물 사이에 화학결합이 발생하여 분자들의 크기가 증가함으로써 개질효과가 커짐을 알 수 있었다.

• Geomechanics and Engineering
• /
• 제36권1호
• /
• pp.39-50
• /
• 2024

Bitumen and high-quality subangular aggregates, the two principal materials used for asphalt concrete construction, are finite and expensive materials. The general availability of crumb rubber and naturally occurring aggregates of different shapes, especially flat and elongated shapes, indicates that they are feasible alternative materials for expanding the volume of bitumen and utilizing a wider range of aggregate shapes for the development of asphalt concrete, with an associated environmental benefit. The study investigated the effect of adding up to 15% crumb rubber and aggregates sorted into different groups, i.e., rounded, elongated, flat, and their combinations, on the rheological and mechanical properties and durability of 50/70 of hot-mix asphalt pavement. The addition of crumb rubber decreased ductility and penetration but increased the softening point. For a 5.5% bitumen content, asphalt concrete briquettes consisting of 7% crumb rubber and three types of aggregate shapes, i.e., 100% rounded, a mix of 75% rounded and 25% elongated, and a mix of 75% rounded, 15% elongated and 10% flat, were associated with high Marshall stability and indirect tensile strength as well as low lateral deformation due to their high solidity and moderate angularity ratio. Also, the addition of 7% crumb rubber resulted in a significant improvement in the tensile strength ratio and rebound strain of briquettes consisting of 75% rounded and 25% elongated aggregates and those with 75% rounded, 15% elongated and 10% flat aggregates. In relation to the parameters investigated, the three groups of briquettes met some of the local (South Africa) requirements for the surface course and base course of low traffic volume roads.

• Elastomers and Composites
• /
• 제50권4호
• /
• pp.304-313
• /
• 2015

In this study, the anionic emulsified asphalt was prepared by dispersing asphalt particles evenly into water with combination of anionic and nonionic surfactants. Effects of NaOH and $CaCl_2$ on the phase stability of the emulsified asphalt were also investigated through zeta potential value and rheology behavior; the emulsified asphalt added with NaOH and $CaCl_2$ showed higher zeta potential value than that the asphalt with addition of only anionic and nonionic surfactants. In addition, with regard to shear thinning behaviors, it was found that pH of the emulsified anionic asphalt and $Ca^{2+}$, counter ion, affected the phase stability. SBR (styrene-butadiene-rubber) latex, EPD (water dispersed Epoxy), PU (polyurethane) and RI-10S, SBS (styrene-butadiene-styrene)-based property improvement additive, were used and studied to enhance the adhesion properties with the aggregates. RI-10S, however, was found to be only compatible with the anionic emulsified asphalt; the coating rate, adhesion and compression strength were increased with the RI-10S content.

• 한국도로학회논문집
• /
• 제2권1호
• /
• pp.123-133
• /
• 2000

폐타이어를 분쇄한 고무분말로써 습식방법에 의해 제조된 CRM아스팔트 혼합물은 일반 아스팔트 혼합물에 비해 온도균열. 피로균열 및 소성변형에 대한 저항성이 증진되는 것으로 알려져 있다. 본 연구에서는 국내에서 생성된 폐타이어 고무분말과 아스팔트(AP-3, AP-5)를 사용하여 제조된 CRM 아스팔트 바인더의 물리적 특성 및 CRM아스팔트 혼합물의 역학적 특성을 비교하였다. 시험결과, CRM 아스팔트 바인더는 일반 아스팔트보다 물리적 특성이 증진되었다. DSR을 사용한 아스팔트 바인더의 고온 특성시험결과, CRM아스팔트는 고온에서 내유동성이 증가되는 것으로 기대되며 노화가 감소되는 것으로 나타났고, 저온 역학적 특성시험결과에서는 CRM아스팔트는 저온균열에 대한 저항성이 증가될 것으로 기대된다.

• Elastomers and Composites
• /
• 제54권4호
• /
• pp.335-344
• /
• 2019

In this work, styrene butadiene rubber (SBR) and styrene butadiene styrene (SBS) were used to modify asphalt, resulting in SBR- and SBS-modified asphalt, respectively. The two modified asphalts were emulsified with a nonionic emulsifier (Span 60) and cationic emulsifiers (ID, DDA) and their phase stabilization was investigated via particle size, Zeta potential, and flow behavior analysis. With increasing amount of the mixed emulsifier, the particle size decreased, leading to an increase in viscosity. The shear thinning behaviors and Zeta potential values ranging from 35-65 mV were determined and remained considerably stable. In addition, the adhesion strength and compression strength of the SBR-and SBS-modified asphalt emulsion were evaluated via surface free energy examination. The remarkable adhesion and compression strengths were estimated when 5 phr ID and 6 phr DDA were added to the emulsified asphalt modified with SBR and SBS. Therefore ID and DDA, the two cationic surfactants, played significant roles in improving the dispersion and interfacial adhesion strength, resulting in the improved adhesion and compression strength of the emulsified asphalts modified with SBR and SBS.

• Elastomers and Composites
• /
• 제27권3호
• /
• pp.174-182
• /
• 1992

Main components of manufactured sealant were vinylester resin, polybutadiene rubber, asphalt and inorganic filler. For manufactured sealant, liquid and cure properties were tested experimantally. It showed better mechanical properties at rubber content $5{\sim}15phr$. Blown asphalt represented better properties than streight asphalt, showed the highest cohesive strength at asphalt content $6{\sim}8phr$. Appropriate usage of filler was $60{\pm}2%$ of total components, and $Al(OH)_3$ showed better flame-retardancy than $CaCO_3$.