• Korean Journal of Agricultural Science
• /
• v.2 no.1
• /
• pp.131-142
• /
• 1975

This study was carried out to define the variations of important quantitative characters and correlations among them accoding to the planted location under the shadow by planting density. The results obtained are summarized as follows; 1. Growth of leaf and stem of 6 rows and 8 rows planting plots was decreased at front and back rows, but that of root was increased at front row and also decreased at back row. However, at 4 rows planting plots, front row was better for the growth of leaf, stem and root. 2. Average root weight of 6 rows planting plot was 34.29g but that of 8 rows planting plot was ]8.20 g. And total weight of root per unit area was increased and quality of ginseng was better in 6 rows planting plot compaired with 8 rows. 3. Variation by planting locations under the shadow was smallest in stem diameter and highest in root length at 8 row planting plot, but at 6 rows planting plot, that was smallest in leaf blade and greatest in stem length. However, in 4 rows plant ing plot, variation of leaf length was smallest and that of root weight biggest. 4. In all Planting densities, root weight was significantly correlated with root diameter and high correlation was recognized between root diameter and stem diameter. 5. Rate of variations of all characters among plant individuals was different by planting location and that of correlations between quantitative Characters too.

• Plant Resources
• /
• v.3 no.3
• /
• pp.184-193
• /
• 2000

Soybean [Glycine max (L.) Merr.] seed weight is a important trait in cultivar development. Objective of this study was to identify and confirm quantitative trait loci (QTLs) for seed weight variation in the F2 and F2:3 generations. QTLs for seed weight were identified in F2 and F2:3 generations using interval mapping (MapMaker/QTL) and single-factor analysis of variance (ANOVA). In the F2 plant generation (i.e., F3 seed), three markers, OPL9a, OPM7a, and OPAC12 were significantly (P<0.01) associated with seed weight QTLs. In the F2:3 plant row generation (i.e., F4 seed), five markers, OPA9a, OPG19, OPL9b, OPP11, and Sat_085 were significantly (P<0.01) associated with seed weight QTLs. Two markers, OPL9a and OPL9b were significantly (P<0.05) associated with seed weight QTLs in both generations. Two QTLs on USDA soybean linkage group C1 and R were identified in both F2 and F2:3 generations using interval mapping. The linkage group C1 QTL explained 16% of the variation in seed weight in both generations, and the linkage group R QTL explained 39% and 41% of the variation for F2 and F2:3 generation, respectively. The linkage group C2 QTL identified in F2:3 generation explained 14.9% of variation. Linkage groups C1, C2 and R had previously been identified as harbouring seed size QTLs. The consistency of QTLs across generations and populations indicates that marker-assisted selection is possible in a soybean breeding program.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.6
• /
• pp.457-462
• /
• 2004

Lodging is one of the most serious problems in soybean cultivation. Therefore, improved cultural methods to reduce lodging as well as to increase photosynthetic ability should be mostly desirable to increase soybean production. The test variety was 'Hwangkeumkong' which was pinched at V7 stage. The greatest difference in canopy height between rows was shown when every other row was pinched, which also recorded the most effective reduction in lodging. The 9th leaf of soybean plants in non-pinching rows of alternative non-pinching and pinching plot showed the highest photosynthetic ability due to the greatest difference in canopy height. Although leaf area index was higher in pinched rows in average after 17 August, alternative pinching of every other row recorded the highest LAI on 5 September. Alternative pinching of every other row resulted $2\~14\%$ higher yield than non-pinching or complete pinching due to the increases of number of grains in the upper part of main stem and average grain weight of non-pinching rows and in alternative pinching.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.1
• /
• pp.33-39
• /
• 2019

The goal of this study was to investigate how the characteristics of growth and yield are affected by various planting densities in wide-row drill seeding cultivation suitable for mechanized harvesting. Two cultivars ('Hwanggeum' and 'Leebackchal') of proso millet (Panicum miliaceum L.) were planted at varying planting densities [row spacing (20, 30, and 50 cm) and plant spacing (3, 5, 10, and 15 cm)]. The culm length was highest at the planting density of $50{\times}3cm$ and $50{\times}5cm$ for 'Hwanggeum' and $20{\times}3cm$ for 'Leebackchal'. The culm diameter became thinner as the planting density increased. The number of tillering and panicle length showed the same tendency to increase in quantity or length as planting density decreased and was highest at $50{\times}15cm$ when the planting density was lowest. The number of seeds per individual increased as planting density decreased. The thousand grain weight showed no significant differences among treatment plots. The greatest yield of 'Hwanggeum' was obtained at a planting density of $50{\times}3cm$ ($314.9kg{\cdot}10a^{-1}$) and that of 'Leebackchal' was obtained at $50{\times}3cm$ and $50{\times}5cm$ ($358-356kg{\cdot}10a^{-1}$).

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.4
• /
• pp.418-425
• /
• 2012

In this paper, efficient implementation of error correction code (ECC) processing circuits based on single error correction and double error detection (SEC-DED) code with check bit pre-computation is proposed for memories. During the write operation of memory, check bit pre-computation eliminates the overall bits computation required to detect a double error, thereby reducing the complexity of the ECC processing circuits. In order to implement the ECC processing circuits using the check bit pre-computation more efficiently, the proper SEC-DED codes are proposed. The H-matrix of the proposed SEC-DED code is the same as that of the odd-weight-column code during the write operation and is designed by replacing 0's with 1's at the last row of the H-matrix of the odd-weight-column code during the read operation. When compared with a conventional implementation utilizing the odd-weight- column code, the implementation based on the proposed SEC-DED code with check bit pre-computation achieves reductions in the number of gates, latency, and power consumption of the ECC processing circuits by up to 9.3%, 18.4%, and 14.1% for 64 data bits in a word.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.1
• /
• pp.151-159
• /
• 2003

The front 2 pieces of the 3-piece steel propeller shaft installed on a 8.5-ton truck were redesigned with a 1 -piece composite propeller shaft with steel yokes and spline parts to get the reduction of weight and the improvement of NVH characteristics. Based on the analysis of bending vibration, strength and cure-induced residual stresses of the composite propeller shaft, proper composite materials and stacking sequences were selected. The composite propeller shaft requires a reliable joining method between the shaft and steel end parts through a steel connector. From 3-D contact stress analyses of the laminated composite shaft with bolted Joints, the 3-row mechanical joint which satisfies the torque transmission capability has been designed. Several full-scale composite shafts were fabricated and tested to verify the design analyses. The design requirements are shown to be satisfied. With the newly designed composite shaft, the weight reduction more than 50% and improvements in NVH characteristics have been achieved.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.20-25
• /
• 1999

This experiment was conducted to elucidate the relation-ship between vertical distribution of rice roots and yield traits under field conditions. Eight IRRI's new plant type rices (NPTRs) were tested in a volcanic ash soil paddy field under dense (IO 10 cm) and common (20 20 cm) planting densities. These lines were evaluated to have more spikelet numbers per panicle (SNP), lower filled grain rate (FGR), and lower rough grain weight per hill (RGWH). In dense planting, rough grain weight per stem (RGWS) was increased due to heavier culm and leaf dry weight (CLDW), and both RGWS and CLDW were related with the percentage of root distribution (%RWI) in the 10~30 cm soil layer, while in common planting, RGWS was not closely related with CLDW. SNP was highly related with root dry weight (RDW) in the 0~10cm soil layer. FGR was mainly affected by ROW in the 10~30 cm soil layer under both planting densities. RGWS was positively correlated with top dry weight (TDW) and harvest index (HI), and TDW was positively correlated with RWI under common planting or %RWI under dense planting, and HI was positively correlated with RWI in the 10~30 cm soil layer only under dense planting. RGWS was closely related with root weight index by dry weight (RWI) in the 10~30 cm soil layer and %RWI in the 0~30 cm or 10~30 cm soil layer under dense planting, and with only RWI in the 10~30 cm soil layer under common planting. But RGWH showed the close positive relationship with RDW and RWI in the 10~30 cm soil layer under dense planting, while under common planting, it showed the close positive relationship with RWI and %RWI in the 10~30 cm soil layer or %RWI in the 0~30 cm soil layer. The deeper root system in rice, especially under dense planting, is important for high yield of NPTRs focusing on the increment of top mass production and harvest index.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.2
• /
• pp.95-101
• /
• 1997

This study was conducted to investigate how a labor saving for conventional hand sowing and respond to major agronomic traits under different planting density in 1993 and 1994. Each trial was a randomized block split plot with row spacing as the main plots and hill spacing as subplots. Sowing rate appeared lower in 20 or 25cm hill spacing using machine seeder than in hand sowing. Sowing time required reduced more 121 hours per hectare in 60cm row, 20cm hill spacings using machine seeder than in hand sowing. Increasing row and hill spacings reduced number of seedling stand per unit $area(m^2)$. Both number of pods per plant and grain weight per plant and showed highly increase in wide planting. Best yield obtained in 60cm row, 20cm hill spacing using machine seeder. Accumulative mean air temperature was positively correlated with stem height, number of pods per plant and yield, otherwise accumulative rainfall was negatively correlated with ones. A highly significant negative correlation was showed between number of seedling stand per unit $area(m^2)$ and number of branches, number of pods per plant, grain weight per plant and yield. Yield was positively correlated with number of branches, number of pods per plant and grain weight per plant.

• Korean Journal of Agricultural Science
• /
• v.4 no.2
• /
• pp.215-228
• /
• 1977

In order to provide good germplasm for developing good corn hybrids, a total of 948 Korean indigenous corn lines were collected from various parts of country and major morphological characterstics of ears were investigated. The results obtained were as follows; 1) Ear Type; From the east-north mountaionus region where more than 80% of total corn production is practiced, cylinder (type I) or similar types to cylinder corn were collected, and from the southern plain region, where rather small scales of corn is grown, cone type (type IV) or similar types to cone were prevalent. 2) Kernel color; In the ear colors of all the indigenous corn lines collected from ten regions, ears with mono color were 54.4%, ears with two color mixed were 39.0% and ears with three or more color mixed were 6.6%. In northern mountainous region, region A and region I, ear color was mostly white or white plus other colors, while in other regions ear color was yellow or yellow plus other colors. 3) Denting; Dent type was only 4.3% of Korean indigenous corn lines collected, and others were flint type. Dent type was collected from northern regions, where foreign corn varieties were introduced and grown. 4) Ear row number; Ear row numbers of indigenous corn lines collected were 12 to 16. There was no significant differences among the ear row numbers in a ear ciassified by regions. However, it was observed that ear row number was closely related to kernel size. For instance, the ears with 24 ear-rows were the smallest in kernel size. 5) Quality of starch; 70.9% of the indigenous corn lines collected were kernels with hard starch. Corn with soft starch was 26.0% and medium type was 3.1%. In region A and region I, where lot of corn is grown, corn with hard starch was more frequently collected. 6) Pop corn and waxy corn; In all the indigenous corn lines collected, popcorn was distributed uniformly through the regions except region I, and waxy corn was found more in the northern mountainous region. 7) Ear length; The mean ear length of indigenous corn lines collected was 13cm. In region A and region I ear length was larger than that in other regions. 8) Ear diameter; The mean ear diameter of indigenous corn lines collected was 3.3cm. In region A and region I ear diameter was larger than that in other regions. 9) Kernel length, kernel width and kernel thickness; The mean kernel length, kernel width and kernel thickness of indigenous corn lines collected were 0.82cm, 0.42cm, and 0.78cm, respectively. The kernel size in the region A and region I was larger than that in other regions. 10) Ear weight; The mean ear weight of indigenous corn lines collected was 58.04gr. Ear weight was remarkably heavier in region A and region I. The heaviest ear weighed 330gr, and the lightest ear weighed 5 gr. 11) Kernel weight of a ear and 100 kernel weight; Kernel weight of a ear and 100 kernel of indigenous corn lines collected were 47.07gr and 15.07gr, respectively. Kernel weights and 100 kernel weights were much heavier in region A and region I than other regions.

• Korean Journal of Organic Agriculture
• /
• v.14 no.2
• /
• pp.191-204
• /
• 2006

This study was conducted to identify the effect of planting date and cultivation method on soybean growth and yield in paddy field. The plant height of soybeans in single cropping(SC) was higher than those in cultivating after barley culture (CB). Considering planting date and cultivation method, plant height tend to be higher in SC with level row cultivation(LR) and in CB with high ridge cultivation(HR). In this SC method, nodule formation in LR was better than in HR, but number of nodules of cv. Hwangkeumkong was highest, regardless of planting date and cultivation method. In the progress of growth stage, leaf areas of all cultivars were distinctively increased in CB than in SC. However, dry weight of top plants and roots in SC was comparably higher than that in CB due to growing periods of the soybeans. In cultivation methods, general type of dry weight of top plants was higher in LR than in HR, however, root dry weight was via verses. Growth responses varied depending on cultivars, cultivation methods, and planting date and these factors affected to shoot root (T/R) ratio. The T/R ratios in LR and SC were higher than those in HR and CB. In R8 stage, number of pods and ripened seed varied depending on cultivars. cv. Hwaeomputkong, which showed early maturing trait, was lowest. However, both yield factors tended to be higher in HR and CB than in LR and SC. The ratios of ripened seeds percentage of cv. Hwangkeumkong and cv. Eunhakong were higher in CB than in SC. However, yields of cv. Daewonkon and cv. Taekwangkong were higher in CB than in SC.