• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.242-245
• /
• 2008

A four-channel selective microwave filter was demonstrated incorporating an optical resonator router, which is constructed by integrating a $1{\times}4$ space switch with an arrayed ring filters featuring different free spectral ranges. The center frequency of each channel was determined by the FSR of the corresponding ring resonator, and the four channels centered at 10 GHz, 16 GHz, 18 GHz and 20 GHz were individually selected to provide a bandpass filtering via the control voltage applied to the switched resonator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4B
• /
• pp.339-350
• /
• 2003

The demands of network users emphasize the improvement and guarantee of service quality as well as the increment of bandwidth. As a result, high performance and additional new functions are important features to build network equipments, especially and edge router. For this structure, network processors with high performance and flexibility are considered as a main part of a packet forwarding module. In this paper, we design and edge MPLS router with a network processor, which supports high performance and multi-functionalities and examine its advantage and limitation.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.10
• /
• pp.2764-2771
• /
• 1999

ATM has recently received much attention because of its high capacity, its bandwidth scalability, and its ability to support multiservice traffic. However, ATM is connection oriented whereas the vast majority of modern data networking protocols are connectionless. The alternative to support current service on ATM will be a router with attached switching hardware that has the ability to cache routing decisions. In this paper, we described the router using a switch and simulated the performance. From the results of the simulation, the routing delay was decreased as the number of flow channels. Cell-delay was shortest at 30,000 cell-time when the keeping time of a flow channel was. The line utilization was rapidly decrease when a flow-setup time is 20 30 cell-time. The results of this simulation could be applied to predict the performance of the router using ATM switch.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.454-455
• /
• 2019

IDC is a server-based facility with a stable line and power supply facility that manages 20 to 30 servers in an efficiently separated rack-level subnetwork. Here, we need a way to efficiently manage servers security, firewall, and traffic on a rack-by-rack basis. If three or five kinds of commercial equipment are adopted to support this, it may be a great burden to the management cost as well as the introduction cost. Therefore, in this paper, we propose a method to implement the five functions in one rack-unit small integrated security router. In particular, IDC intends to integrate traffic shaping and IPS, which are essential technologies, and to propose the utility accordingly.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.844-847
• /
• 2011

Wireless mesh network (WMN) is a type of mobile ad-hoc network consists of wireless router, mobile clients and gateway which connects the network with the Internet. To provide security in the network it is required to encrypt the message sent among the communicating nodes in such way so that only legitimate user can retrieve the original data. Several security mechanisms have been proposed so far to enhance the security of WMN. However, there still exists a need for a comprehensive mechanism to prevent attacks in data communication. Considering the characteristic of mesh network, in this paper we proposed a public key cryptography based security architecture to establish a secure key agreement among communicating nodes in mesh network. The proposed security architecture consists of two major sections: client data protection and network data protection. Client data protection deals with the mutual authentication between the client and the access router and provide client to access router encryption for data confidentiality using standard IEEE 802.11i protocol. On the other hand, network data protection ensures encrypted routing and data transfer in the multi hop backbone network. For the network data protection, we used the pre-distributed public key to form a secure backbone infrastructure.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.05a
• /
• pp.1035-1038
• /
• 2008

Network mobility (NEMO) has been studied extensively due to its potential applications in military and public transportation. NEMO Basic Support Protocol (NBSP) [1], the current NEMO standard based on mobile IPv6, can be readily deployed using the existing mobile IPv6 infrastructure. However, for Nested network mobility, multi-level tunnel and too many Binding Update packets results in substantial performance overhead, generally known as route sub-optimality, especially in the bottleneck root mobile router (root-MR) and Access Router. In this paper, we propose a route optimization mechanism for nested network mobility management to reduce the overhead of root-MR. In this system, Mobile Router (MR) has a cache that stores Mobile Network Nodes' (MNN) information, Correspondent Nodes' (CN) information for every MNN，and the attachments information with its subnet MRs. Home Agent performs Binding Update with CNs responsible for MRs. Through this mechanism, the number of tunnel is limited between CN and MR and the overhead of root-MR is reduced obviously.

• Journal of KIISE:Information Networking
• /
• v.35 no.5
• /
• pp.384-394
• /
• 2008

A wireless router is a device which allows several wireless clients to share an internet line using NAT (Network Address Translation). In a school or a small office environment where many clients use multiple wireless routers, a client may select anyone of wireless routers so that most clients can be clustered to a small set of the wireless routers. In such a case, there exists load unbalancing problem between clients and wireless routers. One of its result is that clients using the busiest router get poor service. The other is that the resource utilization of the whole wireless routers becomes very low. In order to resolve the problems, we propose a load sharing scheme to maximize network bandwidth utilization based on multiple SSID. In a time internal, the proposed scheme keeps to show the available bandwidth information of all the possible wireless routers to clients through multiple SSID. A new client can select the most available band with router. This scheme allows to achieve a good load balancing between clients and routers in terms of bandwidth utilization. We implemented the proposed scheme with ASUS WL 500G wireless router and performed experiments. Experimental results show the bandwidth utilization improvement compared to the existing method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.2 s.3
• /
• pp.43-54
• /
• 2003

As the demand for ubiquitous mobile wireless Internet grows, vehicles are receiving a lot of attention as new networking platforms. The demand for 4G all-IP networks encourages vehicle networks to be connected using IPv6. By means of network mobility (NEMO) support, we can connect sensors, controllers, local ,servers as well as passengers' devices of a vehicle to the Internet through a mobile router. The mobile router provides the connectivity to the Internet and mobility transparency for the rest of the mobile nodes of an in-vehicle nv6 network. So, it is .important for the mobile router to assure reliable connection and a sufficient data rate for the group of nodes behind it. To provide reliability, this paper proposes an adaptive multihoming architecture of multiple mobile routers. Proposed architecture makes use of different mobility characteristics of different vehicles. Simulation results with different configurations show that the proposed architecture increases session preservation thus increases reliability and reduces packet loss. We also show that the proposed architecture is adaptive to heterogeneous access environment which provide different access coverage areas and data rates. The result shows that our architecture achieves sufficient data rates as well as session preservation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.12
• /
• pp.41-49
• /
• 2004

Increase of internet users and new types of applied traffics, have led to demand for more bandwidth for each application. Hence, the amount of internet traffic has risen sharply and it has demanded to use limited resources, such as wavelength and bandwidth, more effectively. These kind of needs can be satisfied with OXC(Optical cross-connects) based on GMPLS that carry out IP packet switching and wavelength switching at the same time and Provide very wide bandwidth. In RSVP-TE signaling of GMPLS studied by IETF. every lambda router in core network should be able to convert wavelength. So, lots of wavelength converters and needed and building and managing cost is high. Another problem is that optimized traffic is limited. In this paper We suggest strengthened GMPLS RSVP-TE signaling algorithm for a better lightpath setup. When setup signaling is blocked suggested algorithm does not send PathErr message to Edge Router, but looks for nearest lambda router which can convert wavelength and carry out setup signaling from that node. Such algorithm can reduce the chance of blocked lightpath setup signaling and provide effective arrangement of lambda router in core network by calculating proper number of wavelength converter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12A
• /
• pp.950-958
• /
• 2011

This paper focuses in the implementation of mesh router supporting multi-path routing based on IEEE 802.11s. In HWMP of IEEE 802.11s, the single path routing just was defined. So, in this work, we implemented not only the single path routing defined in IEEE 802.11s, but also a multipath routing based on AOMDV which extended the standard. A multi-channel multi-interface technology that can transmit and receive simultaneously and lower bandwidth reduction caused by interferences than a single-channel single-interface was implemented in our mesh router. We also developed an outdoor test bed with the mesh routers. The bandwidth of the mesh router and a real-time video streaming service were verified using the test bed. And, the single path and multipath routing algorithms are also compared. In this test bed, The average TCP bandwidth was 23.77 Mbps and the latency was 2.4 ms in five hops. The test bed could service real-time streaming with an average jitter of 0.547 ms in five hops. The mesh router that used the multipath routing path reduced the path recovery time by 12.73% on average.