• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.122-133
• /
• 1998

The CL network fer CBDS(Connectionless Broadband Data Service) defined by ITU-(International Telecommunication Union-Telecommunication) consists of CL(ConnectionLess) servers which route frames and links which connect between CL user and CL server or between CL servers[1][2]. In this configuration, two kinds of congestion, CL link congestion and CL server congestion may occur. Therefore this paper has proposed the scheme that can deal with the above congestion state of LAN traffic efficiently in interworking LANs in ATM network. Proposed schemes ale link-by-link scheme and hybrid scheme. Link-by-link scheme uses the ABR feedback loops of AIM layer between CL user and CL server or between CL servers, and the header translation table carrying out the routing function of frame. And hybrid scheme is the scheme that adds end-to-end loop to link-by-link scheme and then uses RM message using CLNAP-PDU(ConnectionLess Network Access Protocol - Protocol Data Units) of CL layer. These schemes can be implemented easily because of using the ABR loop of ATM layer, end-to-end loop of CL layer, and the routing function of CL server. In this paper the characteristic and effects of two schemes in CL server bas been compared and analyzed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.7
• /
• pp.3100-3116
• /
• 2016

With the rapid development of urban traffic system and fast increasing of vehicle numbers, the traditional centralized ways to generate the source-destination shortest path in terms of travel time(the optimal path) encounter several problems, such as high server pressure, low query efficiency, roads state without in-time updating. With the widespread use of smart cameras in the urban traffic and surveillance system, this paper maps the optimal path finding problem in the dynamic road network to the shortest routing problem in the smart camera networks. The proposed distributed optimal path generation algorithm employs the delay routing and caching mechanism. Real-time route update is also presented to adapt to the dynamic road network. The test result shows that this algorithm has advantages in both query time and query packet numbers.

• Journal of the Korea Society for Simulation
• /
• v.6 no.2
• /
• pp.45-57
• /
• 1997

MAC (media access control) bridge is used to interconnect separate LANs and to relay frames between the BLANs (bridged LANs). Bridge architecture consists of MAC entity, MAC relay entity and bridge protocol entity protocol entity and performs learning, filtering and forwarding functions using filtering database. In this paper, we simulate these functions of bridge and the STP (spanning tree protocol). The STP derives an active topology from an arbitrarily connected BLAN. Our simulation model assumes a BLAN consisted of three bridge forming a closed loop. In order to remove the loop, each bridge process exchanges configruation BPDU (bridge protocol data unit0 with other bridge processes connected to the bridge itself. To simulate the communication between bridges, we implement the IPC (inter-process communication) server using message queues. Our simulation results show that the assumed BLAN contains no closed loop and then there is no alternative route and no unnecessary traffic.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.13-18
• /
• 2018

Drones are controlled by the remote pilot from the ground stations using the radio control or autonomously following the pre-programmed flight plans. In this paper, we develop a method and an optimal path search system for providing 3D augmented reality flight (ARF) images for safe and efficient flight control of drones. The developed system consisted of the drone, the ground station and user terminals, and the optimal path search server. We use the Dijkstra algorithm to find the optimal path considering the drone information, flight information, environmental information, and flight mission. We generate a 3D augmented reality flight (ARF) image overlaid with the path information as well as the drone information and the flight information on the flight image received from the drone. The ARF image for adjusting the drone is generated by overlaying route information, drone information, flight information, and the like on the image captured by the drone.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.319-322
• /
• 2008

사용자의 각 개인별 관심 및 환경에 따라 적절한 정보를 다양한 입출력 방식으로 제공하고, 가정내의 모든 장소에서 네트워크 접속이 가능한 사용자 중심의 지능형 홈 네트워크 환경의 새로운 요구가 대두 되고 있다. 또한 집안의 온도, 가스, 화재, 도어, 적외선 센서들로부터 수집된 정보를 요약, 분석, 처리 가공하여 문자 및 그래픽 등으로 보고 받는 사용자 중심의 서비스 제공이 요구 된다. 이에 본 논문은 전력선 통신 (Power Line Communication, PLC)을 이용한 흠 네트워크 시스템을 구축하여 가정내의 온도, 화재, 침입방지 등의 보안 문제뿐만 아니라 정보가전기기들이 네트워크로 상호 연결되어 기기, 시간, 장소에 구애 받지 않는 다양한 서비스의 제공이 가능하며, 중앙의 홈 서버를 통해 집안 전체의 관리가 가능한 안전하고 스마트한 자동화 서비스를 제공하는 환경을 구축한다.

• Journal of KIISE:Information Networking
• /
• v.34 no.5
• /
• pp.348-359
• /
• 2007

The conventional mobile VPN services assumed the mobile communications occur between the MN in foreign networks and the CN in the home network. However, if a MN wants to communicate with another MN in a foreign network, it could degrade the performance of the mobile VPN service because of the triangular routing problem. In this paper, we propose a route optimization mechanism based on the mobile VPN using an x-HA allocated by diameter MIP in order to support the efficient communication between the mobile VPN users in foreign networks. The i-HA maintains the VPN-TIA as well as the x-HoA as the CoAs to solve the security problem and to provide an efficient route optimization simultaneously. Moreover, we proposed revised IPSec tunnel configuration to reduce the IPSec tunnel overheads at a MN when the MN communicates with several MNs in the foreign networks at the same time. The VPN server, a security management entity in the home network, notifies an additional IPSec tunnel establishment between the x-HAs where the communication peers are registered. The simulation result showed that the proposed scheme decreases the end-to-end packet delay time and improves the throughput after the handoff compared to the existing mechanism.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.191-193
• /
• 2012

the existing developed route guidance services for the visually impaired aids for using RFID tags attached to the cane, the extent to which the cover blocks and RF communication was a simple walking guide service. It has a detection range of RFID readers in short, clear obstacles to location, size and shape can not be determined. And the risk of escape routes in case of questions or directions Measures are urgently needed. Today, due to the Smart Device Development convenience to users and offers many benefits. And the Android platform, Client and Server (PC) between the socket stream, using real-time video and voice information, location information by sending a dangerous situation for the visually impaired to take immediate action on the system and 1: N is to implement the service.

• Journal of Korea Multimedia Society
• /
• v.7 no.5
• /
• pp.689-697
• /
• 2004

Rapid advances in mobile computing and the availability of wireless communications will soon provide mobile users with the ability to access data regardless of the location of the user or of the data. SRA(Static Replica Allocation) that is traditional scheme has been used for the replication method on the server. This replicates the data on the replica server after a moving host has been transferred to the cell. This strategy is simple and can easily relocate data. However, if a mobile user does not exist in the cell, the replicated data can be deleted in order to maintain data consistency. In addition to, if the mobile host leaves from replicated cell, it is difficult to access data in terms of replication route. Therefore, this paper proposes a new method of relocation based on data consistency strategy called USRAC(User Selection Replica Allocation based on Consistency) and also analyzes access cost according to the moving rate of mobile users, according to the access rate of mobile hosts, and according to the number of cells of mobile users and mobile hosts.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.190-193
• /
• 2015

The current sea route sign system based on an electronic marine chart only has a data manufacture specification for uses at ECDIS. Therefore, it has a limitation in expressing various sea route data and falls short of productivity as it is frozen to prevent being changed for a long time. Also, it cannot satisfy requirements from high tech such as lattice structure data and time series information. Currently, although it builds each independent operation system based S-57, it has been found that it is the most important requirement from consumers that the entire monitoring system can mutually interwork by standardizing and uniting formats of all protocols. In addition, current status information and alarm system is using AIS, TRS, WCDMA telecommunication and processing all the data after saving it into each different server. Lighthouse lantern which currently has used was utilized to do a performance test of a developed system. All of created data was trasmitted through the RS-232, It is clear that the data was received by a situation monitoring system. In addition, when the data was transmitted after saving in a database, same data was ordinarily received. In this thesis, we will implemented the status information and alarm system of Marine transportation facilities which is a sea route sign system based on S-63 electronic marine chart, S/W, after uniting each different protocol and making combined system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.3
• /
• pp.185-196
• /
• 2018

In order to overcome the problem that outdoor and indoor spatial information service are separately utilized, an integration service system of spatial information that is linked from outdoor to indoor has been implemented. As a result of the study, "0001.xml" corresponding to the file index key value, which is the service connection information in the building information of the destination, was extracted from the prototype verification of the system, the search word of 'Kim AB' was transmitted to the indoor map server and converted from the outdoor map service to the indoor map service through confirmation of the navigation service connected information, using service linkage information and search words of the indoor map service was confirmed that the route was displayed from the entrance of the building to the destination in the building through the linkage search DB (Database) table and the search query. Therefore, through this study was examined the possibility of linking indoor and outdoor DB through vector spatial information integration service system. The indoor map and the map engine were implemented based on the same vector map format as the outdoor map engine, it was confirmed that the connectivity of the map engine can be applied.