• 한국분말재료학회지
• /
• 제1권1호
• /
• pp.27-34
• /
• 1994

Commercial pure iron powder and iron powder of coated 0.45% phosphorus were mixed with graphite powder in dry mixer to control carbon content from 0 wt% to 0.8 wt%. Mixed powder was pressed in the mould under the pressure of 510 MPa. Compacts were sintered at 118$0^{\circ}C$ for 40 min. in cracked ammonia gaseous atmosphere. Some of these sintered specimens were quenched in oil, and tempered in Ar gas. All of these specimens were investigated for microstructure, density and hardness in relation to coated phosphorus and carbon content. The results obtained were as follows: (1) The microstructure of the sintered speciments revealed that the amount of pearlite was increased with increasing C content but decreased by P-addition. (2) The P-addition affected the microstructure of pores in which the pore shape became round and its mean size was decreased by P-addition. (3) After tempering of sintered specimens the structure of pearlite was changed from fine structure to coarse one in P added specimen. (4) Hardness was higher in P added specimens.

• 대한세포병리학회지
• /
• 제2권2호
• /
• pp.142-147
• /
• 1991

Diagnosis of a thymic carcinoid was made on transthoracic fine needle aspiration in a 36-year old woman who had an anterior mediastinal mass on chest X-ray and CT scan. The aspiration smears showed numerous anastomosing ribbons and cords of small round tumor cells. The tumor cells had slightly eccentric nuclei and some granular cytoplasm. The small and uniform nuclei of the tumor cells had finely granular chromatin and thin nuclear membrane. The cytologic diagnosis of a carcinoid was confirmed on histopathologic, immunohistochemical, and electromicroscopic examination of surgical specimen.

• 대한세포병리학회지
• /
• 제2권2호
• /
• pp.148-152
• /
• 1991

A mediastinal mass was aspirated by fluoroscope-guided fine needle aspiration biopsy in a 47 years old female patient. The first aspiration smears were not diagnostic, because of hemorrhagic background and cell paucity. On the second aspiration, the smears were composed of some clusters of benign epithelial cells in hemorrhagic back-ground. Cells were arranged in mostly solid sheets and tended to form glandular lumina in part. Their nuclei were round and vesicular. Nucleoli were not prominent. These findings were suggestive of benign glandular tissue, which was finally confirmed as mediastinal thyroid gland by open thoracotomy specimen.

• 한국수산과학회지
• /
• 제51권5호
• /
• pp.595-599
• /
• 2018

One specimen (181.0 cm; TL, total length) of Echinorhinus cookei was collected from Busan, Korea in 2014 using gill net. Echinorhinus cookei was characterized by having no anal fin, no spine at dorsal fin and numerous small dermal denticles at the placoid scale. This species is very similar to the congeneric species, E. brucus, but differed in the shape of placoid scale (star in E. cookei vs. round in E. brucus) and distribution of placoid scale (separated in E. cookei vs. slightly overlapped in E. brucus). We adopted the Korean name, Ga-si-bi-neul-sang-eo, for E. cookei, after Kim and Ryu (2017).

• Tuberculosis and Respiratory Diseases
• /
• 제57권3호
• /
• pp.278-283
• /
• 2004

원발성 폐평활근육종은 아주 드문 종양으로 대부분 전이된 예로 나타난다. 저자들은 좌폐상엽과 하엽에 연하여 발생한 종괴와 좌심방과 좌심실에 전이된 소견을 보이는 종괴를 관찰후 진단적 개흉술을 통한 조직검사로 진단하고 전이여부에 대한 검사를 시행한 결과 현저한 파골세포 모양의 거대세포로 구성된 원발성 폐평활근육종의 심장내 전이로 진단된 1예를 경험하였기에 문헌고찰과 함께 보고하는 바이다.

• 환경생물
• /
• 제26권1호
• /
• pp.22-29
• /
• 2008

무당개구리(Bombina orientalis, Korean fire-bellied toad)는 양서강 개구리목 무당개구리과 무당개구리속(Class Amphinia, Order Anura, Family Bombinatoridae Genus Bombina)의 무미양서류이다. 소형으로 행동이 느리고 온순하여 취급이 용이하며 실험모델로써 많은 장점이 있으나 번식기를 제외한 개체를 대상으로 한 연구는 시료확보의 난점으로 무당개구리의 계절번식 특성에 대한 연구는 미진하다. 최근 지구온난화의 직간접적인 영향으로 전 세계적으로 무당개구리를 포함한 많은 양서류가 감소하고 있으며 야생채집개체를 활용하는 연구는 점차 규제를 받을 것으로 사료된다. 이전 연구에서 시행되었던 바이오톱 조성 목적과 달리 양서류 번식생물학적 연구를 위한 자연서식환경 조성은 시도되지 않았다. 본 연구는 무당개구리의 생식, 발생, 생태연구를 실험실 환경에서 수행하기 위한 목적으로 자연서식환경을 모방한 biotope 계획과 조성지침, 그리고 표준처리절차(SOP)를 제시하였다. 조성 후 시험적으로 방사한 개체연구결과로 는 실내사육실에서 키웠던 개체와는 달리 자연생태환경에서 관찰되는 계절적 적응현상을 관찰할 수 있었다. 본 지침서를 기초로 조성된 양서류 biotope을 활용하면 온대지방에 서식하는 양서류의 계절번식 생태를 실험실 환경에서 연구하는 데 유용할 것으로 사료된다.

• Archives of Plastic Surgery
• /
• 제34권5호
• /
• pp.622-627
• /
• 2007

Purpose: Although the autogenous tissue transfer has been the mainstay of the breast reconstruction, concern for the donor site morbidity can lead to the superseded method using tissue expander with implant or permanent expander-implant. However, the additional procedure of tissue expansion possibly cause discomfort and raise the cost. We tried to verify the efficacy of using the saline-filled breast implant by itself for the safe and convenient immediate breast reconstruction modality if the patients have small, round and non-ptotic breasts and the sufficient breast skin can be saved with mastectomy. Methods: From July 2002 to July 2005, 29 breasts of 26 patients were restored only with the saline-filled breast implant immediately after the skin sparing or nipple-areolar skin sparing mastectomy in Asan Medical Center. A pocket with pectoralis major and serratus anterior muscle was created and the implant was covered with this muscle pocket. Simultaneous contralateral augmentation was performed in patients whose mastectomy specimen weighed less than 100g. Results: Using only the saline-filled breast implant resulted in the successful reconstruction with few complications including partial necrosis of nipple areolar skin (five cases, 17.2%), capsular contracture (three cases, 10.3%), hematoma (one case, 3.4%), depigmentation of areolar skin (one case, 3.4%), hypertrophic scar (one case, 3.4%), which were all healed by conservative management. There were no significant complications such as implant exposure and subsequent removal. Conclusion: Immediate breast reconstruction only with the saline-filled breast implant can be a satisfactory alternative option for the patients whose breast is small, round and non-ptotic, especially when the nipple-areolar skin of the breast is preserved in the mastectomy.

• 대한치과교정학회지
• /
• 제22권3호
• /
• pp.647-656
• /
• 1992

The purpose of this study was to evaluate the elastic memory process in cold worked stainless steel wire and the effect of heat treatment on it. 0.018 inch round and $0.019\times0.025$ inch rectangular wire (ORMCO stainless wire) were used in this study. Each wire type had 4 groups: non-heat treatment group, furnace heat treatment group, electric current heat treatment group, and bending after heat treatment group. Each group was consisted of 10 specimens. With the Jig, each wire was bent into v-shape uniformly, and width of two free ends of each v-shaped wire was measured by caliper (to the point of 0.1 mm correctly) at time interval of offjig, after heat treatment, 1, 2, 3, 4 hours, 1, 2, 3, 4, 5, 6 days, 1, 2, 3, 4 weeks after. The results were as follows: 1. In non-heat treatment group and bending after heat treatment group, elastic memory process was occured $60\%$ within 1 hour, and more than $90\%$ within 1 week. 2. In furnace and electric current heat treatment group, almost all elastic memory process was occured during teat treatment, and then specimen was stabilized dimensionally. 3. Magnitude of deformation by elastic memory was greater in heat treatment group than non heat treatment group and bending after heat treatment group. 4. There was no remarkable difference in deformation pattern between 0.018 inch round wire and $0.019\times0.025$ inch rectangular wire.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권7호
• /
• pp.3325-3328
• /
• 2016

Background: There are limited studies on oncoplastic breast conserving surgery in Asian women. We aimed to determine the applicability and safety of oncoplastic surgery, highlighting the specific circumstances when it will be most useful and compare our preferred technique with the worldwide practice of oncoplastic approaches. Materials and Methods: Breast cancer patients who underwent oncoplastic breast conserving surgery at a single institution from 1st May 2014-31st March 2015 were included. Data on patient demographics, tumor characteristics and the type of oncoplastic surgery performed were collected. Results: Nineteen breast cancer patients were identified. 42.1% of patients had grade I ptosis. The indications for surgery included a large tumor to breast size ratio (52.6%), multifocal/multicentric lesions (36.8%) and asymmetric breasts (10.6%), averting a mastectomy in 89.4%. Round block was the commonest technique in 63% of patients, in contrast to the inverted T pattern most frequently used in renowned institutions in the West. Mean and median tumor size and weight of specimen were 29.4/25mm (11 - 75mm) and 77g/64g (10 - 246g) respectively. Re-excision rate was 10.5%. Complete mastectomy was performed for one patient. One patient developed wound dehiscence which was treated conservatively. Cosmetic outcome was rated as excellent/good by 94.7% of patients. The patients remained clinically well after a median 16 months follow up. Conclusions: Oncoplastic breast conserving surgery is useful in a specific subgroup of Asian patients with a relatively small breast volume and minimal ptosis. Round block was the commonest technique in our series, in contrast to the worldwide utility of oncoplastic techniques. It is oncologically safe and has good cosmetic outcomes.

• 한국압력기기공학회 논문집
• /
• 제15권2호
• /
• pp.19-30
• /
• 2019

In this study, to evaluate conservatism of various fatigue life evaluation procedures, fatigue tests were conducted using compact tension (CT) specimens with a round notch, made of A516 Gr.70 carbon steel and A240 TP304 stainless steel, under load-controlled cyclic condition. Experimental fatigue failure cycles were measured and compared with predicted fatigue lives using two different life evaluation methods; (1) Design-By-Analysis (DBA) procedure given in ASME B&PV Code, Sec. III, Div. 1, Subsec. NB-3200 and (2) structural stress-based approach provided in ASME B&PV Code, Sec. VIII, Div. 2, Part 5. To predict fatigue failure cycles, three-dimensional elastic finite element analysis was conducted. Fatigue lives were predicted by both design fatigue curve given in ASME B&PV Code, Sec. III, Div. 1, Appendices and best-fit fatigue curve suggested in NUREG/CR-6815 for the DBA procedure. Finally, fatigue lives evaluated by various methods were compared with test results, and then conservatism between each evaluation procedure was discussed.