• The korean journal of orthodontics
• /
• v.29 no.3 s.74
• /
• pp.303-315
• /
• 1999

The aim of this study was to evaluate the morphology of the mandibular symphysis and anterior alveolar and skeletal relationship under the influence of the rotational growth pattern of mandible in skeletal Class III malocclusion. A total of U untreated adult subjects were divided into two groups-forward rotational growth pattern group, backward rotational growth pattern group-according to the suggestion of Skieller et al.. The antero-posterior position, vertical relationship, mandibular symphysis and anterior alveolar and skeletal relationship were assessed on lateral cephalometric radiographs. Mandibular symphysis and anterior alveolar and skeletal relationship in each subject were studied and the following conclusions were drawn : 1. Concerning the antero-posterior position, forward rotational growth pattern group showed significantly larger SNA, SNB. Conceming the vertical relationship, all measurements showed statistically significant differences. 2. Forward rotatioal growth pattern group showed significantly larger IMPA, MnAD, backward rotational growth pattern group showed significantly larger MxABH. 3. There was no statistically significant difference in symphysis ratio to mandibular plane between forward and backward rotational growth pattern group. 4. In the correlative analysis of rotational growth pattern of mandible and mandibular symphysis, anterior alveolar and skeletal relationship, statistically significant correlations in overbite, IMPA, MnAD, symphysis width were showed.

• Journal of the Korean Ceramic Society
• /
• v.22 no.5
• /
• pp.43-46
• /
• 1985

Constitutional supercooling due to concentration gradient at solid-liquid interface in the melt can be avioded by increasing rotational speed for growing $LiNbO_3$ single crystals from the stoichiometric melt. Growth conditions for high quality crystals were determined by rotational speed by which other growth parameters were adjusted.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.2
• /
• pp.19-23
• /
• 2011

The current streetlight system have been tried various attempts. but during maintenance, it has caused the traffic congestion and many risk factors. In addition, maintenance costs are very expensive to manage and the local government have to establish countermeasures about the present condition. If neglected, it may cause a variety of social problems. so, there should be a measure to prevent problems. This rotational and up-and-down type streetlight can be a solution to these factors and it has been highlighted indirectly in terms of green growth because we have to take advantage of the value.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.5
• /
• pp.374-378
• /
• 2004

The effects of various environmental factors such as pH (5, 6, 7, 8 and 9), temperature (30, 37 and $40^{\circ}C$) and rotational speed (150, 200 and 250 rpm) on the growth and the hepatitis B core antigen (HBcAg) production of Escherichia coli W3110IQ were examined in the present Study. The highest growth rate is achieved at pH 7, $37^{\circ}C$ and at a rotational Speed of 250 rpm which is 0.927 $h^{-1}$. The effect of pH on cell growth is more substantial compared to other parameters; it recorded a $123\%$ different between the highest growth rate (0.927 $h^{-1}$) at pH 7 and lowest growth at pH 5. The highest protein yield is achieved at pH 9, rotational speed of 250 rpm and $40^{\circ}C$. The yield of protein at pH 7 is $154\%$ higher compared to the lowest yield achieved at pH 5. There is about $28\%$ different of the protein yield for the E. coli cultivated at 250 rpm compared to that at 150 rpm which has the lowest HBcAg yield. The yield of protein at $40^{\circ}C$ is $38\%$ higher compared to the lowest yield achieved at $30^{\circ}C$.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.349-349
• /
• 2017

This study was performed in order to investigate disease, insect damage, growth and yield characteristics of green maize by organic paddy-upland rotation system. This experiment also was to select optimum variety for organic paddy-upland rotation cultivation. This experiment was conducted at Anseong-si Gyeonggi province of Korea in 2016. The varieties used in this study are green maize of total 8 varieties. Green maize was planted at rotational upland field and continuing upland field and tested for comparison. In case of average occurrence of 4 major diseases for green maize, rotational upland field was higher than that of continuing upland field. Heukjinjuchal and Daehakchal were the lowest occurrence by less than 2% among 8 varieties. Average damage of 8 varieties by Ostrinia furnacalis larva, which is the main pest in green maize was higher in rotational upland field than that of continuing upland field. Chalok 4 and Heugjeom 2 were judged to be resistant varieties to 4 major diseases among 8 varieties. The average yield of green maize per 10a in rotational upland field decreased to 85% level of continuing upland field and Chalok 4 showed the highest yield by 789.0 kg/10a among 8 varieties. The most suitable varieties in organic paddy-upland rotation system were judged to be Chalok 4, Heukjinjuchal and Heukjeom 2.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.10
• /
• pp.3322-3333
• /
• 1996

A numerical analysis has been conducted to investigate a modified floating-zone crystal growth process in which most of the melt surface is covered with a heated ring. The crystal rod is not only pulled downward but rotated around its axisymmetric line during crystal growth process in order to produce the flat interface of crystal growth and the single crystal growth of NaNO3 is considered in 6mm diameter. The present study is made from a full-equation-based analysis considering a pulling velocity in all of solid and liquid domains and both of solid-liquid interfaces are tracked simultaneously with a governing equation in each domain. Numerical results are mainly presented for the comparison of the surface shape of rotational crystal rod with that of no-rotational crystal rod and the effects of revolution speeds of the crystal rod. Results show that the rotation of crystal rod produces more its flat surface. In addition, the shape of crystal growth near the centerline is more concaved with the increase in the revolution speed of crystal rod. The flow pattern and temperature distribution is analyzed and presented in each case. As the pulling velocity of crystal rod is increasing, the free surface of the melt below the heated ring is enlarged due to the crystal interface migrating downward.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.4
• /
• pp.397-410
• /
• 2000

Skeletal class III had been classified by the position of the maxilla, the mandible, the maxillary alveolus, the mandibular alveolus and vertical development. This morphologic approach is simple and useful for clinical use, but it is insufficient to permit understanding of the pathophysiology of dysmorphoses. The author hypothesizes that there are different patterns of mutual relation of the skeletal components which have contributed pathologic equilibrium of skeletal class III. The purpose of this study are threefold: 1) to classify skeletal class III in subgroups, which can show the architectural characteristics of the deformity, 2) to analyse the craniofacial architecture of each subgroup on etio-pathogenic basis, and 3) to characterize and visualize the pattern as a prototype. Materials used in this study were lateral cephalograms of 106 skeletal class III adults, which were analysed with modified Delaire's architectural and structural analysis. Linear and angular measurements of the individual subject were obtained and cluster analysis was used for the subgrouping. Data were evaluated for verification of the statistical significances. The following results were obtained. 1. By the modified Delaire's architectural and structural analysis and cluster analysis, skeletal class III adults were classified into 7 clusters and presented as prototypes, which could show the pathophysiology of the skeletal architecture 2. There was significant relationship in measurement variables of each cluster, which could reflect characteristics of the skeletal pattern of growth. 3. The flexure of cranial base had a close relationship to the anterior rotational growth of the maxilla and contributes to understand the etio-pathology of skeletal class III. 4. The proportion of craniospinal area in cranial depth, craniocervical angle and vertical position of point Om had a close relationship to rotational growth of the mandible and direction of condylar growth. They contribute to understand the etio-pathology of skeletal class III. In summary, the cranium and the craniocervical area must be considered in diagnosis and treatment planning of dentofacial deformity. And the occlusal plane can be considered as a representative which shows the mutual relationships of the skeletal components.

• Journal of the Korean Ceramic Society
• /
• v.25 no.6
• /
• pp.699-703
• /
• 1988

Domain structures of LiNbO3 crystals grown by Czochralski method were examined according to the growth axis and the rotational speed of crystals. Ring shape and split domain structures were revealed in Z-axis and Y-axis grown crystals respectively. It was found that the domain structures of grown crystals were closely related to the solid-liquid interface shape during growth.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1996.05a
• /
• pp.110-111
• /
• 1996

• Korean Journal of Organic Agriculture
• /
• v.25 no.2
• /
• pp.387-401
• /
• 2017

This study was performed in order to investigate disease, insect damage, growth and yield characteristics of green maize by organic paddy-upland rotation system. This experiment also was to select optimum variety for organic paddy-upland rotation cultivation. This experiment was conducted at Anseong-si Gyeonggi province of Korea in 2016. The varieties used in this study are green maize of total 8 varieties. Green maize was planted at rotational upland field and continuing upland field and tested for comparison. In case of average occurrence of 4 major disease for green maize, rotational upland field was higher than that of continuing upland field. Heukjinjuchal and Daehakchal were the lowest occurrence by less than 2% among 8 varieties. Average damage of 8 varieties by Ostrinia furnacalis larva, which is the main pest in green maize was higher in rotational upland field than that of continuing upland field. Chalok 4 and Heugjeom 2 were judged to be resistant varieties to 4 major disease among 8 varieties. The average yield of green maize per 10a in rotational upland field decreased to 85% level of continuing upland field and Chalok 4 showed the highest yield by 789.0 kg/10a among 8 varieties. The most suitable varieties in organic paddy-upland rotation system were judged to be Chalok 4, Heukjinjuchal and Heukjeom 2.