• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.815-818
• /
• 2006

This paper deals with the free, in-plane vibrations of curved members with the translational(radial and tangential directions) and rotational springs at the ends. The governing differential equations for the circular curved member are solved numerically using the corresponding boundary conditions. The lowest three natural frequencies and the corresponding mode shapes are obtained over a range of non-dimensional system parameters: the subtended angle, the slenderness ratio, the translational spring stiffness, and the rotational spring stiffness.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.694-697
• /
• 2003

Materials with specific micro-structural shape can exhibit negative Poisson's ratio. These materials can be widely used in structural applications because of their high resilience and resistance to impact. Specially, in the field of artificial implant's material, they have many potential applications. In this study, we investigated the Poisson's ratio and the ratio(E$_{e}$/E) of the elastic modulus of rotational particle structures based on structural design variables using finite element method. As the ratio of fibril's length to particle's diameter increased and the ratio of fibril's diameter to fibril's length decreased fixing the fibril's angle with 45 degree. the negative Poisson effect of rotational particle structures increased. The ratio of elastic modulus of these structures decreased with Poisson's ratio. The results show the reasonable values as compared with the previous analytical results.s.

• 대한치과의사협회지
• /
• 제16권11호통권114호
• /
• pp.849-856
• /
• 1978

Relapse following rotational movement of the tooth is a common problem in orthodontic practice. To overcome such relapse, many procedures have been advocated: prolonged retention, permanent retention, over-rotation, rotation of teeth at an early age, surgical procedures such as gingivectomy, redressement force, septotomy, et cetra. A 23-year-old woman presented with Angle's Class I malocclusion and extreme rotation of maxillary central incisors. After 15 months' active therapy, septotomy was performed on maxillary central incisors and Howley retainer was applicated for the purpose of overcoming rotational relapse. During the 1 year post-operative observation, negligible, if any, rotational relapse occurred.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권3호
• /
• pp.20-23
• /
• 2007

To calibrate precision autocollimators, the Korean Research Institute of Standards and Science (KRISS) has built a small angle generator using a laser interferometer. The system is based on a sine bar mechanism in which the angle is determined from the ratio of two lengths. The rotational angle is measured by the angle interferometer and the heterodyne laser interferometer detects the relative displacement of two retro-reflectors attached to the rotating arm. The distance between the two retro-reflectors of the laser angle interferometer is self-calibrated by an index table positioned on the rotating arm. The resolution of the system is 0.002 seconds, and the accuracy is better than 0.04 seconds within a measuring range of $\pm$1 degree. The small angle generator can also be used with an index table that can divide one circle into 1440 angles. The combined system can generate any angle over 360 degrees to an accuracy of 0.11 seconds.

• 소음진동
• /
• 제8권1호
• /
• pp.99-111
• /
• 1998

An analytical method using the substructure synthesis and assumed modes method is developed to investigate the effect of flexibility of bladed disk assembly on vibrational modes of flexible rotor system. In modeling the system, Coriolis forces, gyroscopic moments, and centrifugal stiffening effects are taken into account. Then the coupled vibrations between the shaft and bladed disk are extensively investigated using simplistic models, as the shaft rotational speed and the pretwist and stagger angles of blade are varied.

• 한국공간구조학회논문집
• /
• 제4권4호
• /
• pp.55-63
• /
• 2004

더블앵글 접합부는 저층 철골조에 많이 사용된다. 본 연구에서는 더블앵글 접합부에 사용된 볼트의 개수 변화가 접합부 회전강성 변화에 미치는 영향을 시험을 통하여 파악하고, 모멘트-회전각 관계 곡선의 회귀분석을 통하여 초기강성, 소성강성, 참조모멘트, 곡선형태변수 등을 획득하였다. 또한 더블앵글 접합부의 초기강성이 접합부의 모멘트 지지능력을 파악하는데 매우 중요한 변수라는 것이 밝혀졌기 때문에 이러한 초기강성 산정을 위한 해석모델도 제안하였다.

• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.135-144
• /
• 1998

High speed machining is a key issue in die and mold manufacturing recently. Even though this technology has great potential of high productivity. tool wear accelerated by high cutting speed to the hardened materials is other barrier. In this research, we attempted to reduce tool wear by considering tool inclination angle between tool and workpiece. The boundary lines describing machined sculptured surfaces were represented by both of cutting envelop condition and the geometric relationship of successive tool paths. Chip cross section, and cutting length could be obtained from the calculated cutting edge and the rotational engagement angle. From the simulation results, machining inclination angle of tool of $15^\circ$ was good enough from the point of tool wear and cutting force, and this value was verified through the cutting experiment of high speed ball end milling.

• 한국광학회지
• /
• 제5권1호
• /
• pp.25-30
• /
• 1994

투명한 비등방성 매질의 편광투과특성을 나타내는 유니타리 존즈행렬과 뽀앙카레공의 표면에서의 회전변환이 일대일 대응되는 것을 보여주는 공식을 끌어내었다. 이 공식들을 쓰면 유니타리 존즈행렬의 세 매개변수로부터 이에 대응되는 회전변환의 회전축 방향과 회전각을 보여주는 벡터표현을 얻을 수 있고, 또 거꾸로 회전변환의 벡터표현으로부터 이에 대응디는 유니타리 존즈행렬의 매개변수를 결정할 수 있다. 빛이 투명한 비등방성 선형매질을 지날 때 편광상태의 변화를 살펴보려면 먼저 매질전체의 편광투과특성을 나타내는 존즈행렬을 계산하고, 이로부터 뽀앙카레공에서의 회전변환을 결정하여 뽀앙 카레공 위의 점들이 어떻게 회전이동하는가 보면 된다.

• Wind and Structures
• /
• 제32권3호
• /
• pp.267-281
• /
• 2021

Bending-twisting coupling induced in big composite wind turbine blades is one of the passive control mechanisms which is exploited to mitigate loads incurred due to deformation of the blades. In the present study, flutter characteristics of bend-twist coupled blades, designed for load alleviation in wind turbine systems, are investigated by time-domain analysis. For this purpose, a baseline full GFRP blade, a bend-twist coupled full GFRP blade, and a hybrid GFRP and CFRP bend-twist coupled blade is designed for load reduction purpose for a 5 MW wind turbine model that is set up in the wind turbine multi-body dynamic code PHATAS. For the study of flutter characteristics of the blades, an over-speed analysis of the wind turbine system is performed without using any blade control and applying slowly increasing wind velocity. A detailed procedure of obtaining the flutter wind and rotational speeds from the time responses of the rotational speed of the rotor, flapwise and torsional deformation of the blade tip, and angle of attack and lift coefficient of the tip section of the blade is explained. Results show that flutter wind and rotational speeds of bend-twist coupled blades are lower than the flutter wind and rotational speeds of the baseline blade mainly due to the kinematic coupling between the bending and torsional deformation in bend-twist coupled blades.

• 한국항행학회논문지
• /
• 제28권4호
• /
• pp.379-385
• /
• 2024

관성항법장치는 정지 상태에서 가속도계 및 자이로 센서가 측정한 중력과 지구 자전 각속도 정보를 이용하여 정렬을 수행하며, 일반적으로 선형 항법 오차 모델 기반의 영속도 보정 칼만필터를 사용하여 수행된다. 하지만 이는 정지 상태를 가정하여 설계된 알고리즘으로 해상 정박 중 정렬을 수행하는 경우, 파도로 인해 발생하는 움직임으로 정렬 오차가 커지거나 필터가 발산하게 된다. 본 논문에서는 큰 방위각 오차 모델과 초기위치 보정 기법을 사용하여 해상 플랫폼을 위한 정박 중 정렬 알고리즘을 설계하고 시뮬레이션을 통해 검증하였다. 또한 이를 회전형 관성항법장치에 적용하였을 경우 바이어스가 상쇄되는 원리를 통해 비약적으로 성능이 개선됨을 확인하였다.