• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권1호
• /
• pp.6-14
• /
• 2011

This paper presents a high-speed QR decomposition architecture for the multi-input-multi-output (MIMO) receiver based on Givens rotation. Under fast-varying channel, since the inverse matrix calculation has to be performed frequently in MIMO receiver, a high performance and low latency QR decomposition module is highly required. The proposed QR decomposition architecture is composed of Sign-Select Lookahead (SSL) coordinate rotation digital computer (CORDIC). In the SSL-CORDIC, the sign bits, which are computed ahead to select which direction to rotate, are used to select one of the last iteration results, therefore, the data dependencies on the previous iterations are efficiently removed. Our proposed QR decomposition module is implemented using TSMC 0.25 ${\mu}M$ CMOS process. Experimental results show that the proposed QR architecture achieves 34.83% speed-up over the Compact CORDIC based architecture for the 4 ${\times}$ 4 matrix decomposition.

• 한국분말재료학회지
• /
• 제3권3호
• /
• pp.159-166
• /
• 1996

A series of test were undertaken in order to estabilish the effect of different milling variables on dimension and quality of aluminium flake powder. Milling conditions such as initial powder size, milling container rotation speed, milling time, and ball size were varied to produce aluminium flake powder. Flake powder could then be obtained with size range from 15 $\mu$m to 40 $\mu$m with a maximum specific surface area of 5 $m^{2}$/g by controlling milling conditions. Diameter of milled powders with different milling container rotation speed and ball size were compared with that obtained from theoretical model. The best flake powder was obtained in milling condition of initial powder with average size of 19 $\mu$m, mill container rotation speed of 80 rpm, balls of 9.5 mm diameter, and milling time of 40 hours.

• 대한기계학회논문집B
• /
• 제21권3호
• /
• pp.436-444
• /
• 1997

Three-dimensional conjugate heat transfer and particle deposition on a circular cylinder in the OVD process are numerically investigated. Flow and temperature fields are obtained by an iterative method, and thermophoretic particle deposition is simulated. Effects of the heat conduction in the cylinder, the rotation speed of the cylinder, and the traversing speed of torch on the deposition are studied. Effects of variable properties are also included. As the conductivity of the cylinder decreases, particle deposition rate and deposition efficiency greatly decrease due to the reduced temperature gradient. The rotation of the cylinder has no significant effect on the deposition due to the small diameter of the cylinder and low speed of rotation. Since the increase of the torch speed keeps the surface low temperature, the particle deposition increases with the traversing speed.

• Journal of Welding and Joining
• /
• 제22권3호
• /
• pp.69-76
• /
• 2004

Effects of friction stir welding parameters such as tool rotation speed and welding speed on the joints properties of 5052 Al alloys were studied in this study. A wide range of friction stir welding conditions could be applied to join 5052 AA alloy without defects in the weld zone except for certain welding conditions with a lower heat input. Microstructures near the weld zone showed general weld structures such as stir zone (SZ), thermo-mechanically affected zone (TMAZ) and heat affected zone (HAZ). Each zone showed the dynamically recrystallized grain, transient grain and structure similar to base metal's, respectively. Hardness distribution near the weld zone represented a similar value of the base metal under wide welding conditions. However, in case of 800 rpm of tool rotation speed, hardness of the stir zone had a higher value due to the fine grain with lots of dislocation tangle, a higher angle grain boundary and some of Al3Fe particles. Except joints with weld defects, tensile strength and elongation of the joints had values similar to the base metal values and fracture always occurred in the regions approximately 5mm away from the weld center.

• 소성∙가공
• /
• 제30권4호
• /
• pp.195-200
• /
• 2021

In this study, we investigated the dominant processing variables that would influence the microstructural development of AA6061 deformed by differential speed rolling (DSR) at ambient temperature. For this purpose, we carried out a series of DSR on the samples to investigate the effects of roll speed ratio, sample rotation, and number of operation under specific rotation. Among these, the condition with a height reduction of 75% at a speed ratio of 1:4 through rotation along rolling direction (RR) displayed the pronounced results of more homogenous matrix-structure and superior mechanical properties than the others tested in this study. This was mainly due to the cross shearing of macro-shear pattern in segment where dynamic recrystallization took place with ease throughout the sample. Thus, an average microhardness value of 101 Hv was obtained in the present sample deformed by 4-pass DSR with RR where macro cross-shearing was effectively applied.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.83-86
• /
• 2002

Numerical simulations are conducted for laminar flow past a sphere rotating In the transverse direction, in order to investigate the effect of the rotation on the characteristics of flow over a sphere. The Reynolds numbers considered are Re=100, 250 and 300 based on the free-stream velocity and the sphere diameter, and the rotational speeds are in the range of $0{\leq}{\omega}{\leq}1$, where ${\omega}^{\ast}$ is the maximum velocity on the sphere surface normalized by the free-stream velocity. At ${\omega}^{\ast}=0$ (without rotation), the flow past the sphere experiences steady axisymmeoy, steady planar-symmetry and unsteady planar-symmetry, respectively, at Re=100, 250 and 300. However, with rotation, the flow becomes planar-symmetric for all the cases investigated and the symmetry plane is orthogonal to the axis of the rotation. The flow is also steady or unsteady depending on both the Reynolds number and the rotational speed, and the vortical structures behind the sphere are significantly modified by the rotation. For example, at Re=300, hairpin vortices completely disappear in the wake at ${\omega}^{\ast}=0.4\;and\;0.6$, and at ${\omega}^{\ast}=1$ vortical structures of a high frequency are newly generated due to the shear layer instability. It is also shown that with increasing rotational speed, the time-averaged drag and lift coefficients increase monotonically.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.103-106
• /
• 2004

The new rheology fabrication process has been developed to rheo die casting and rheo forming process. Thixoforming process has disadvantages in terms of induction reheating process, scrap recycling, loss of raw material and cycle time. Therefore, to reduce the number of process, new rheology fabrication process with specially designed the rotational barrel type equipment has been proposed to apply in various part productions. The barrel type equipment, which could continuously fabricate the rheology materil, was specially designed to have a function to control cooling rate, shear rate and temperature. During the continuous rotation of barrel with a constant temperature, the shear rate is controlled with the rotation speed. The barrel surface has both the induction heating system and the cooling system to control the temperature of molten metal. By using this system, the effect of the rotation speed and the rotation time on the microstructure was widely examined. The possibility for the rheoforming process was investigated with microstructural characteristic.

• 한국안광학회지
• /
• 제18권4호
• /
• pp.441-447
• /
• 2013

목적: 렌즈 착용자의 자세변화 시 토릭소프트렌즈의 축 회전을 알아보고 각막난시와의 상관관계에 대해 알아보았다. 방법: 직난시를 가진 20대 42안을 대상으로 정자세와 누운 자세에서의 토릭소프트렌즈의 회전 정도와 회전 방향, 회전 속도를 측정하여 각막 난시량에 따라 차이가 있는지를 비교 분석하였다. 결과: 정자세와 누운 자세에서 각각의 축 회전 정도는 처방도수에 따라 유의한 차이가 없었으나, 자세의 변화에 따른 회전 각도는 유의한 차이가 있었다. 정자세에서의 회전은 20안은 코쪽, 22안은 귀쪽으로 회전하였다. 누운 자세에서는 거의 모든 대상안에서 누운 방향으로 회전 되었으며 -0.75 D를 착용한 초기에는 회전 속도가 빨랐던 것에 비해 -1.25 D를 착용할 때는 상대적으로 회전속도가 일정하였다. 누운 자세에서의 회전 각도는 각막 난시량에 따라 유의한 차이를 보였고, 회전 속도 또한 시간의 흐름에 의해서는 유의한 차이를 보인 반면 각막 난시량에 따라서는 유의한 차이를 보이지 않았다. 결론: 토릭소프트렌즈의 축 회전 정도는 자세 변화에 따라 다르게 나타나며, 각막 난시량이 큰 경우 그 정도가 더 크므로 렌즈디자인 개발 시 이에 대해 고려해야 할 것으로 보인다.

• 동력기계공학회지
• /
• 제20권3호
• /
• pp.51-56
• /
• 2016

In this study, the tensile tests and hardness tests were carried out for the joints characteristics in friction stir welds of Al 5052 alloy. Three way factorial design was applied to optimal welding conditions, whose control factors were shoulder diameter, rotation speed and welding speed of tool. From the results of this study, the optimum condition for maximum yield strength was predicted as the shoulder diameter of 15 mm, welding speed of 500mm/min and rotating speed of 1000 rpm. And the presumed optimal yield strength was estimated to be $167.36{\pm}7.82MPa$ with 99% reliability. In addition the increaser rotation speed of tool and the decreaser welding speed, the decreaser the hardness at welding part.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.328-330
• /
• 1994

The Ultrasonic motor(USM) has many good characteristics such as high torque at low speed range, large holding torque based upon frictional force, high speed response, flexible free ferns, compactness in size, low magnetic noise and silentness in motion. Because of having low speed rotation, USM is good as an actuator of a small size direct drive (DD) manipulator. The acturators for the DD manipulators must have good controllability on the speed and torque from zero to maximum value continuously. New method was developed for speed and torque control by the phase difference control of the two-phase driving signals of the motor. Then rule adjustable compliant and dumped motion was realized on the output shaft of the motor by PD control of the output shaft angle.