• Journal of Korean Neurosurgical Society
• /
• 제58권6호
• /
• pp.534-538
• /
• 2015

Objective : To correct apical vertebral rotation for adolescent idiopathic scoliosis (AIS), direct vertebral derotation (DVD) or simple rod rotation (SRR) might be considered. The aim of the present study is to introduce the surgical experiences of AIS by a Korean neurosurgeon and to evaluate the effectiveness of SRR for apical vertebral rotation. Methods : A total of 9 patients (1 male and 8 females) underwent scoliosis surgery by a neurosurgeon of our hospital. The Lenke classifications of the patients were 1 of 1B, 2 of 1C, 1 of 2A, 1 of 2C, 3 of 5C and 1 of 6C. Surgery was done by manner of simple rod rotation on the concave side and in situ coronal bending. Coronal Cobb's angles, vertebral rotation angles and SRS-22 were measured on a plain standing X-ray and CT before and after surgery. Results : The mean follow up period was 25.7 months (range : 5-52). The mean number of screw positioning level was nine (6-12). The mean age was 16.4 years (range : 13-25) at surgery. The mean Risser grade was $3.7{\pm}0.9$. The apical vertebral rotation measured from the CT scans was $25.8{\pm}8.5^{\circ}$ vs. $9.3{\pm}6.7^{\circ}$ (p<0.001) and the Coronal Cobb's angle was $53.7{\pm}10.4^{\circ}$ vs. $15.4{\pm}6.5^{\circ}$ (p<0.001) preoperatively and postoperative, respectively. The SRS-22 improved from 71.9 preoperatively to 90.3 postoperatively. There were no complications related with the operations. Conclusion : SRR with pedicle screw instrumentation could be corrected successfully by axial rotation without complications. SRR might serve as a good option to correct AIS deformed curves of AIS.

• 정보처리학회논문지D
• /
• 제18D권1호
• /
• pp.9-22
• /
• 2011

본 논문에서는 윤곽선 이미지 매칭에서 회전-불변 거리 계산의 효율적 방법을 제안한다. 회전-불변 거리 계산은 이미지 시계열을 한 칸씩 회전하면서 매번 유클리디안 거리를 계산해야 하는 고비용의 연산이다. 본 논문에서는 엔빌로프 기반 하한을 사용하여 회전-불변 거리 계산을 크게 줄이는 획기적인 해결책을 제시한다. 이를 위해, 먼저 질의 시퀀스 대상의 단일 엔빌로프 작성과 이의 하한 개념을 제시하고, 이를 회전-불변 거리 계산에 사용하면 많은 수의 회전-불변 거리 계산을 줄일 수 있음을 보인다. 그런데, 단일 엔빌로프 기법은 하나의 엔빌로프가 가능한 모든 회전 시퀀스를 포함하기 때문에 하한이 커지고, 이에 따라 매칭 성능이 저하되는 문제점이 있다. 이러한 문제점을 해결하기 위하여, 본 논문에서는 회전 구간의 개념을 도입하여 단일 엔빌로프 기반 하한을 다중 엔빌로프 기반 하한 개념으로 확장한다. 또한, 다중 엔빌로프 기법에서 회전 구간을 결정하기 위한 방법으로 동일-너비 기법과 엔빌로프 최소화 기법을 제안한다. 실험 결과, 제안한 엔빌로프 기반 매칭 기법은 기존 기법에 비해 최대 수 배에서 수십 배까지 매칭 성능을 향상시킨 것으로 나타났다.

• Archives of Reconstructive Microsurgery
• /
• 제16권1호
• /
• pp.23-29
• /
• 2007

The reconstruction of deep soft tissue defect such as pressure sore has difficult problems. Myocutaneous flaps have been used commonly as the best coverage method for pressure sore. But, they have several drawbacks such as sacrifice of functional muscle, high morbidity of the donor sites and bulkiness at the recipient site. The concepts of perforator flap has recently developed and widely used to overcome these disadvantages. Between March 2005 to July 2006, we have treated 9 patients who had pressure sore using perforator based fasciocutaneous island rotation flap. Preoperative unidirectional Doppler was used in all cases. Mean number of perforator vessels was 3.8 and flap sizes were from $7{\times}5\;cm$ to $14{\times}13\;cm$. Rotation angles of flap were from 90 degree to 180 degree. In all cases, donor sites were closed primarily. All flap survived completely and postoperative complications were wound dehiscence in 1 case, wound infection in 3 cases. The mean postoperative follow up period was 15.7 months and recurrence was not reported. We could decrease donor site morbidity and cover wound sites easily by using flap rotation and get robust blood supply without sacrifice of functional muscle. Fasciocutaneous perforator island rotation flap would be very useful for various pressure sore treatment.

• Steel and Composite Structures
• /
• 제32권3호
• /
• pp.325-336
• /
• 2019

Concrete placement and temporary formwork of bridge deck overhangs result in unbalanced eccentric loads that cause exterior girders to rotate during construction. These construction loads affect the global and local stability of the girders and produce permanent girder rotation after construction. In addition to construction loads, the skew angle of the bridge also contributes to girder rotation. To prevent rotation (in both skewed and non-skewed bridges), a number of techniques have been suggested to temporarily brace the girders using transverse tie bars connecting the top flanges and embedded in the deck, temporary horizontal and diagonal steel pipes placed between the webs of the exterior and first interior girders, and permanent cross frames. This study includes a rigorous three-dimensional finite element analysis to evaluate the effectiveness of several bracing systems for non-skewed and several skewed bridges. In this paper, skew angles of $0^{\circ}$, $20^{\circ}$, $30^{\circ}$, and $45^{\circ}$ were considered for single- and three-span bridges. The results showed that permanent cross frames worked well for all bridges, whereas temporary measures have limited application depending on the skew angle of the bridge.

• 한국유체기계학회 논문집
• /
• 제10권3호
• /
• pp.25-32
• /
• 2007

The present paper deals with the heat/mass transfer characteristics for the rotating impingement/effusion cooling system. By changing the size and number of injection hole, its effects on heat/mass transfer are investigated and three different injection hole cases are considered such as LH, DH and SH, respectively. Reynolds number based on the effusion hole diameter is fixed to 3,330 and two jet orientations are considered. A naphthalene sublimation method is used to obtain the heat/mass transfer coefficients on the effusion plate. The LH case shows that the local heat/mass transfer is significantly varied by the rotation. Moreover, the low and non-uniform Sh distributions occur because the impinging jet is deflected by Coriolis force. Meanwhile, for DH and SH cases, the local heat/mass transfer coefficients are enhanced significantly compared to LH case and the rotation effect decreases with increasing the jet velocity. The averaged Sh value of DH and SH case rises up to 45%, 85% than that of LH case. However, the uniformity of heat/mass transfer deteriorates due to the steep variation of heat/mass transfer.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.459-466
• /
• 2005

The present study investigates the heat transfer characteristics of a triangular channel. Three different rib configurations are tested. The ribs are installed on two sides of the channel. The rib height (e) to channel hydraulic diameter is 0.079 and the rib-to-rib pitch (p) is 8 times of the rib height. The rotation number ranges from 0.0 to 0.1 while the Reynolds number is fixed at 10,000. The copper blocks with heaters are installed on the channel walls to measure the regionally averaged heat transfer coefficients. For the stationary $45^{\circ}$ and $135^{\circ}$ ribbed channels, a pair of counter rotating vortices is induced by the angled rib arrangements, and high heat transfer coefficients are obtained on the regions near the inner wall for the $45^{\circ}$ ribbed channel and near the leading edge for the $90^{\circ}$ ribbed channel. The heat transfer coefficients of angled ribbed channels are changed little with rotation, whereas those of the transverse ribbed channel are changed significantly with rotation.

• 한국생산제조학회지
• /
• 제26권2호
• /
• pp.166-171
• /
• 2017

This study analyzes the effect of anodizing conditions on nanopore formation on a cylindrical aluminum roll. In general, a nanopore is formed at the center of a concave base-pattern. Occasionally, multiple nanopores are formed on a single base-pattern. However, to control the diameter and interpore distance precisely, single nanopores are required. In this study, the ratio of the number of single nanopores to the total number of nanopores was investigated by varying anodizing conditions such as electrode area, electrolyte concentration, and rotation speed of the roll mold. The areal ratio of the counter-electrode to the working electrode (aluminum), electrolyte concentration, and the roll-mold rotation speed were varied from 0.4% to 42%, 0.07 M to 0.3 M, and 5 rpm to 75 rpm, respectively. The experimental results showed that the single-nanopore ratio increased with increasing counter-electrode area and electrolyte concentration. However, the rotation speed had no significant effect on nanopore shape.

• 대한기계학회논문집B
• /
• 제28권8호
• /
• pp.910-920
• /
• 2004

The heat/mass transfer characteristics in a rotating two-pass duct with and without rib turbulators are investigated in the present study. The square duct has a hydraulic diameter ($D_h$) of 26.7 mm, and $1.5\;mm{\times}1.5\;mm$ square $90^{\circ}$-rib turbulators are attached on the leading and trailing walls. The pitch-to-rib height ratio (p/e) is 10. The Reynolds number based on the hydraulic diameter is kept constant at 10,000 to exclude the Reynolds effect, and the rotation number is varied from 0.0 to 0.20. In the smooth duct, the curvature of the $180^{\circ}$-turn produces Dean vortices that enhance heat/mass transfer in the post-turn region. When rib turbulators are installed, heat/mass transfer is augmented 2.5 times higher than that of the smooth duct since the main flow is turbulated by reattaching and separating in the vicinity of the duct surfaces. The duct rotation results in heat/mass transfer discrepancy so that Sherwood number ratios are higher on the trailing surface in the first-pass and on the leading surface in the second-pass. In the turning region, Dean vortices shown in the stationary case transform into one large asymmetric vortex cell, and subsequent heat/mass transfer characteristics also change. As the rotation number increases, the heat/mass transfer discrepancy enlarges.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(3)
• /
• pp.29-32
• /
• 2001

In this paper, we applied the high-performance PGAP(Parallel Genetic Algorithm Processor) to recognizing rotated pattern. In order to perform this research efficiently, we used Multi-PGAP system consisted of four PGAP. In addition, we used mental rotation based on the rotated pattern recognition mechanism of human to reduce the number of operation. Also, we experimented with distinguishing specific pattern from similar coin patterns and determine rotated angle between patterns. The result showed that the development of future artificial recognition system is feasible by employing high performance PGAPS.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.6-11
• /
• 1988

Alight-weight robot arm carrying a payload is modelled as a cantilever beam with a tip mass subjected to a high speed rotation. Equations of Motion, for modal control, are represented as discrete state variable form. Digital optimal control law with observer is developed to suppress the arm vibration and control the position of the joint angle. The effects of the number of controlled modes, weighting factors of the performance index, reference rotation time, and sampling time on the control performance are analyzed by computer simulation and experiments.